1,949 research outputs found
Rapid thermal annealing of Amorphous Hydrogenated Carbon (a-C:H) films
Amorphous hydrogenated carbon (a-C:H) films were deposited on silicon and quartz substrates by a 30 kHz plasma discharge technique using methane. Rapid thermal processing of the films was accomplished in nitrogen gas using tungsten halogen light. The rapid thermal processing was done at several fixed temperatures (up to 600 C), as a function of time (up to 1800 sec). The films were characterized by optical absorption and by ellipsometry in the near UV and the visible. The bandgap, estimated from extrapolation of the linear part of a Tauc plot, decreases both with the annealing temperature and the annealing time, with the temperature dependence being the dominating factor. The density of states parameter increases up to 25 percent and the refractive index changes up to 20 percent with temperature increase. Possible explanations of the mechanisms involved in these processes are discussed
Natural resources of Lake Earl and Smith River Delta
The Lake Earl/Smith River Delta area is a key coastal wetland situated in northern California. The Lake and Delta have retained much of their value to wildlife and serve as an important link in a chain of such wetlands that extend southward along the Pacific Ocean from Alaska to South America. Millions of water-associated birds of the Pacific Flyway utilize these areas as feeding and resting stops along their migration paths. In California, these wetlands also serve as a significant portion of the available wintering grounds for a major share of the birds within the flyway.
The Smith River is also one of the State's most productive salmon and steelhead streams. Anadromous fish produced here provide thousands of angler use days to sport fishermen and contribute substantially to the commercial fishing catch off the northern coast.
Because of the importance of coastal wetlands to the fish and wildlife of California, the Department of Fish and Game has initiated a high priority statewide inventory and assessment of these wetlands. This publication is an integral part of that program.
This report identifies specific resources and uses; directs attention to problems; and recommends courses of action needed to insure resource protection. It is intended as a guide for citizens, planners, administrators and other
interested in the use and development of California's
coastal land and waters. (132pp.
Spectroscopy of Seven Cataclysmic Variables with Periods Above Five Hours
We present spectroscopy of seven cataclysmic variable stars with orbital
periods P(orb) greater than 5 hours, all but one of which are known to be dwarf
novae. Using radial velocity measurements we improve on previous orbital period
determinations, or derive periods for the first time. The stars and their
periods are
TT Crt, 0.2683522(5) d;
EZ Del, 0.2234(5) d;
LL Lyr, 0.249069(4) d;
UY Pup, 0.479269(7) d;
RY Ser, 0.3009(4) d;
CH UMa, 0.3431843(6) d; and
SDSS J081321+452809, 0.2890(4) d.
For each of the systems we detect the spectrum of the secondary star,
estimate its spectral type, and derive a distance based on the surface
brightness and Roche lobe constraints. In five systems we also measure the
radial velocity curve of the secondary star, estimate orbital inclinations, and
where possible estimate distances based on the MV(max) vs.P(orb) relation found
by Warner. In concordance with previous studies, we find that all the secondary
stars have, to varying degrees, cooler spectral types than would be expected if
they were on the main sequence at the measured orbital period.Comment: 25 pages, 2 figures, accepted for Publications of the Astronomical
Society of the Pacifi
Spectroscopy of Nine Cataclysmic Variable Stars
We present optical spectroscopy of nine cataclysmic binary stars, mostly
dwarf novae, obtained primarily to determine orbital periods Porb. The stars
and their periods are LX And, 0.1509743(5) d; CZ Aql, 0.2005(6) d; LU Cam,
0.1499686(4) d; GZ Cnc, 0.0881(4) d; V632 Cyg, 0.06377(8) d; V1006 Cyg,
0.09903(9) d; BF Eri, 0.2708804(4) d; BI Ori, 0.1915(5) d; and FO Per, for
which Porb is either 0.1467(4) or 0.1719(5) d.
Several of the stars proved to be especially interesting. In BF Eri, we
detect the absorption spectrum of a secondary star of spectral type K3 +- 1
subclass, which leads to a distance estimate of approximately 1 kpc. However,
BF Eri has a large proper motion (100 mas/yr), and we have a preliminary
parallax measurement that confirms the large proper motion and yields only an
upper limit for the parallax. BF Eri's space velocity is evidently large, and
it appears to belong to the halo population. In CZ Aql, the emission lines have
strong wings that move with large velocity amplitude, suggesting a
magnetically-channeled accretion flow. The orbital period of V1006 Cyg places
it squarely within the 2- to 3-hour "gap" in the distribution of cataclysmic
binary orbital periods.Comment: 31 pages, 5 postscript and one PNG figure. Accepted for PAS
Localized soft elasticity in liquid crystal elastomers.
This is the final version of the article. It first appeared from Nature Publishing Group via http://dx.doi.org/10.1038/ncomms10781Synthetic approaches to prepare designer materials that localize deformation, by combining rigidity and compliance in a single material, have been widely sought. Bottom-up approaches, such as the self-organization of liquid crystals, offer potential advantages over top-down patterning methods such as photolithographic control of crosslink density, relating to the ease of preparation and fidelity of resolution. Here, we report on the directed self-assembly of materials with spatial and hierarchical variation in mechanical anisotropy. The highly nonlinear mechanical properties of the liquid crystalline elastomers examined here enables strain to be locally reduced >15-fold without introducing compositional variation or other heterogeneities. Each domain (⩾0.01 mm(2)) exhibits anisotropic nonlinear response to load based on the alignment of the molecular orientation with the loading axis. Accordingly, we design monoliths that localize deformation in uniaxial and biaxial tension, shear, bending and crack propagation, and subsequently demonstrate substrates for globally deformable yet locally stiff electronics.T.H.W., A.F.S. and T.J.W. would like to acknowledge financial support from the Materials and Manufacturing Directorate and the Office of Scientific Research of the Air Force Research Laboratory
Building Self-reliance: A Framework to Evaluate Smallholder Coffee Farmers’ Pursuit of Commercialization
This study examines the application of a self-reliance framework for practitioners and evaluators to better understand the capacities and intrinsic factors impacting smallholder coffee farmers’ commercialization behaviors. We surveyed 40 smallholder coffee producers in Peru using a quantitative instrument. Data were analyzed to determine if statistical relationships exist between farmers’ self-reliance (measured via knowledge and skills, attitudes, and aspirations) and their commercialization behaviors. Findings indicate the self-reliance framework effectively illustrates relationships between farmers’ aspirations, knowledge and skills and their commercialization behaviors, while future, additional studies are needed to better measure and understand the role of commercialization-related attitudes. Practitioners can leverage the study’s findings by using a self-reliance framework to infer farmers’ likeliness to pursue sustainable commercialization practices and align their trainings and design interventions based on evaluation findings. The conceptual self-reliance framework is the first of its kind applied for smallholder coffee commercialization. The findings demonstrate that self-reliance concepts employed recently in other contexts may potentially be used similarly by extension and development facilitators
Electron spin coherence in metallofullerenes: Y, Sc and La@C82
Endohedral fullerenes encapsulating a spin-active atom or ion within a carbon
cage offer a route to self-assembled arrays such as spin chains. In the case of
metallofullerenes the charge transfer between the atom and the fullerene cage
has been thought to limit the electron spin phase coherence time (T2) to the
order of a few microseconds. We study electron spin relaxation in several
species of metallofullerene as a function of temperature and solvent
environment, yielding a maximum T2 in deuterated o-terphenyl greater than 200
microseconds for Y, Sc and La@C82. The mechanisms governing relaxation (T1, T2)
arise from metal-cage vibrational modes, spin-orbit coupling and the nuclear
spin environment. The T2 times are over 2 orders of magnitude longer than
previously reported and consequently make metallofullerenes of interest in
areas such as spin-labelling, spintronics and quantum computing.Comment: 5 pages, 4 figure
AlGaAs growth by OMCVD using an excimer laser
AlGaAs has been grown on GaAs by laser assisted OMCVD using an excimer laser, wavelength 193 nm, and a Cambridge OMCVD reactor. Films were grown at temperatures of 450 and 500 C with the laser beam parallel to the surface and impinging onto the surface at 15 deg from parallel. The samples were heated by RF coils while the laser beam was perpendicular to the gas flow. Typical gas flow parameters are 12 slm of H2, 15 sccm of Ga(CH3)3, 13 sccm of Al(CH3)3, and a pressure of 250 mbar. The initial energy density of the beam at the surface was 40 mJ/sq cm, the pulse rate was 20 pps, and the growth time was 7 min. The films were analyzed by Auger electron spectroscopy for the aluminum concentration and by TEM for the surface morphology
- …