Fighting Words: Evidential Particles, Affect, and Argument

Proceedings of the Thirteenth Annual Meeting of the Berkeley Linguistics Society (1987), pp. 343-35

Mayan Master Speakers – The Archive of the Indigenous Languages of Chiapas

The Archive of the Indigenous Languages of Chiapas is an electronic database documenting the three principal Indian languages of Chiapas, Mexico. This report describes the design philosophy behind the archive, intended to distribute its results in digital form via the Internet. It illustrates some of the products of the Archive, ranging from standard linguistic description and lexicography, through semi-experimental elicitation, to ethnographically situated interaction characterized by different sorts of speech genre. It also discusses presentational and ethical issues derived from electronic distribution of digital media in linguistic documentation

Design of cryogenic tanks for launch vehicles

During the period since January 1990, work was concentrated on the problem of the buckling of the structure of an ALS (advanced launch systems) tank during the boost phase. The primary problem was to analyze a proposed hat stringer made by superplastic forming, and to compare it with an integrally stiffened stringer design. A secondary objective was to determine whether structural rings having the identical section to the stringers will provide adequate support against overall buckling. All of the analytical work was carried out with the TESTBED program on the CONVEX computer, using PATRAN programs to create models. Analyses of skin/stringer combinations have shown that the proposed stringer design is an adequate substitute for the integrally stiffened stringer. Using a highly refined mesh to represent the corrugations in the vertical webs of the hat stringers, effective values were obtained for cross-sectional area, moment of inertia, centroid height, and torsional constant. Not only can these values be used for comparison with experimental values, but they can also be used for beams to replace the stringers and frames in analytical models of complete sections of tank. The same highly refined model was used to represent a section of skin reinforced by a stringer and a ring segment in the configuration of a cross. It was intended that this would provide a baseline buckling analysis representing a basic mode, however, the analysis proved to be beyond the scope of the CONVEX computer. One quarter of this model was analyzed, however, to provide information on buckling between the spot welds. Models of large sections of the tank structure were made, using beam elements to model the stringers and frames. In order to represent the stiffening effects of pressure, stresses and deflections under pressure should first be obtained, and then the buckling analysis should be made on the structure so deflected. So far, uncharacteristic deflections under pressure were obtained from the TESTBED program using two types of structural elements. Similar results were obtained using the ANSYS program on a mainframe computer, although two finite element programs on microcomputers have yielded realistic results

Prolongation of overall treatment time as a cause of treatment failure in early breast cancer: an analysis of the UK START (Standardisation of Breast Radiotherapy) trials of radiotherapy fractionation

AbstractBackgroundTests of tumour treatment time effect in patients prescribed post-operative radiotherapy for early breast cancer have focussed on time to start of radiotherapy rather than overall treatment time. The START randomised trials of radiotherapy fractionation provide an opportunity to directly estimate the effect of treatment acceleration.MethodsBetween 1986 and 2002, a total of 5861 women with early breast cancer were recruited into the UK START pilot (START-P), START-A and START-B randomised trials. START-P and START-A tested 13 fractions of 3.0–3.3Gy against 25 fractions of 2.0Gy with a fixed treatment duration of 5weeks for all schedules; START-B tested 15 fractions of 2.67Gy in 3weeks against 25 fractions of 2.0Gy over 5weeks. Estimates of the effect of length of treatment for local–regional relapse and for a measure of late normal tissue effects (change in photographic breast appearance, for patients following breast conserving surgery) were obtained from Cox proportional hazards regression analyses stratified according to trial.ResultsAt a median follow-up of 10years, 444/5831 (7.6%) patients with data available had a local–regional relapse, and 1135/3185 (35.6%) had mild or marked change in photographic breast appearance by 5years. Adjusting for prognostic factors, the estimate of the overall treatment time effect for local–regional relapse was 0.60Gy/day (95%CI 0.10 to 1.18Gy/day, p=0.02), and 0.14Gy/day (95%CI −0.09 to 0.34Gy/day, p=0.29) for change in photographic breast appearance.ConclusionsCombined analysis of the START trials generates the hypothesis that overall treatment time is a significant determinant of local cancer control after adjuvant whole breast radiotherapy, with approximately 0.6Gy per day ‘wasted’ in compensating for tumour cell proliferation

NASA-UVA Light Aerospace Alloy and Structures Technology Program: LA(2)ST

The NASA-UVA Light Aerospace Alloy and Structures Technology (LA(2)ST) Program continues a high level of activity, with projects being conducted by graduate students and faculty advisors in the Departments of Materials Science and Engineering, Civil Engineering and Applied Mechanics, and Mechanical and Aerospace Engineering at the University of Virginia. This work is funded by the NASA-Langley Research Center under Grant NAG-1-745. We report on progress achieved between July 1 and December 31, 1992. The objective of the LA(2)ST Program is to conduct interdisciplinary graduate student research on the performance of next generation, light weight aerospace alloys, composites and thermal gradient structures in collaboration with NASA-Langley researchers. Specific technical objectives are presented for each research project. We generally aim to produce relevant data and basic understanding of material mechanical response, corrosion behavior, and microstructure; new monolithic and composite alloys; advanced processing methods; new solid and fluid mechanics analyses; measurement advances; and critically, a pool of educated graduate students for aerospace technologies

NASA-UVA light aerospace alloy and structures technology program

The report on progress achieved in accomplishing of the NASA-UVA Light Aerospace Alloy and Structures Technology Program is presented. The objective is to conduct interdisciplinary graduate student research on the performance of next generation, light weight aerospace alloys and associated thermal gradient structures in close collaboration with researchers. The efforts will produce basic understanding of material behavior, new monolithic and composite alloys, processing methods, solid and fluid mechanics analyses, measurement advances, and a pool of educated graduate students. The presented accomplishments include: research on corrosion fatigue of Al-Li-Cu alloy 2090; research on the strengthening effect of small In additions to Al-Li-Cu alloys; research on localized corrosion of Al-Li alloys; research on stress corrosion cracking of Al-Li-Cu alloys; research on fiber-matrix reaction studies (Ti-1100 and Ti-15-3 matrices containing SCS-6, SCS-9, and SCS-10 fibers); and research on methods for quantifying non-random particle distribution in materials that has led to generation of a set of computer programs that can detect and characterize clusters in particles