Strain rate dependence of work of fracture tests on bone and similar tissues: reflections on testing methods and mineral content effects

This paper is concerned with the effect of different strain rate on the Work of Fracture (Wf) of various vertebrate mineralised tissues, controlling for the effect of mineral content and Young's modulus of elasticity. Using specimens of uniform shape and size values for the Work of Fracture of specimens tested at various deformation rates, and also the energy absorbed by notched specimens in impact, are reported. The results indicated that, of those tested, for most bone specimens the Work of Fracture measurements were constant like in the case for a ‘material property’. Variations due to loading conditions (deformation rate) were small, with the exemption of antler, which is relatively poorly mineralised and in which the Work of Fracture values increased by a factor of 4 across the range from quasistatic loading to impact. The Tattersall and Tappin (1966) test has shown itself to offer some great advantages: if the quest is for a fracture toughness test for an unknown tissue it offers reliability, it is perhaps more forgiving to handling errors, it also suffers less of the influence of strain rate effects and uses relatively simple instrumentation. It is also able to demonstrate the remarkable toughness of antler bone which other more commonly used fracture toughness methods cannot do

Is the collagen primed for mineralization in specific regions of the Turkey tendon?:an investigation of the protein-mineral interface using Raman spectroscopy

The tendons in the turkey leg have specific well-defined areas which become mineralized as the animal ages and they are a thoroughly characterized model system for studying the mineralization process of bone. In this study, nondestructive Raman spectroscopic analysis was used to explore the hypothesis that regions of the turkey tendon that are associated with mineralization exhibit distinct and observable chemical modifications of the collagen prior to the onset of mineralization. The Raman spectroscopy features associated with mineralization were identified by probing (on the micrometer scale) the transition zone between mineralized and nonmineralized regions of turkey leg tendons. These features were then measured in whole tendons and identified in regions of tendon which are destined to become rapidly mineralized around 14 weeks of age. The data show there is a site-specific difference in collagen prior to the deposition of mineral, specifically the amide III band at 1270 cm(-1) increases as the collagen becomes more ordered (increased amide III:amide I ratio) in regions that become mineralized compared to collagen destined to remain nonmineralized. If this mechanism were present in materials of different mineral fraction (and thus material properties), it could provide a target for controlling mineralization in metabolic bone disease

Racial and Socioeconomic Disparities Are More Pronounced in Inflammatory Breast Cancer Than Other Breast Cancers

Inflammatory breast cancer (IBC) is a rare yet aggressive form of breast cancer. We examined differences in patient demographics and outcomes in IBC compared to locally advanced breast cancer (LABC) and all other breast cancer patients from the Breast and Prostate Cancer Data Quality and Patterns of Care Study (POC-BP), containing information from cancer registries in seven states. Out of 7,624 cases of invasive carcinoma, IBC and LABC accounted for 2.2% (N = 170) and 4.9% (N = 375), respectively. IBC patients were more likely to have a higher number (P = 0.03) and severity (P = 0.01) of comorbidities than other breast cancer patients. Among IBC patients, a higher percentage of patients with metastatic disease versus nonmetastatic disease were black, on Medicaid, and from areas of higher poverty and more urban areas. Black and Hispanic IBC patients had worse overall and breast cancer-specific survival than white patients; moreover, IBC patients with Medicaid, patients from urban areas, and patients from areas of higher poverty and lower education had worse outcomes. These data highlight the effects of disparities in race and socioeconomic status on the incidence of IBC as well as IBC outcomes. Further work is needed to reveal the causes behind these disparities and methods to improve IBC outcomes

Pharmacologic Inhibition of the TGF-β Type I Receptor Kinase Has Anabolic and Anti-Catabolic Effects on Bone

During development, growth factors and hormones cooperate to establish the unique sizes, shapes and material properties of individual bones. Among these, TGF-β has been shown to developmentally regulate bone mass and bone matrix properties. However, the mechanisms that control postnatal skeletal integrity in a dynamic biological and mechanical environment are distinct from those that regulate bone development. In addition, despite advances in understanding the roles of TGF-β signaling in osteoblasts and osteoclasts, the net effects of altered postnatal TGF-β signaling on bone remain unclear. To examine the role of TGF-β in the maintenance of the postnatal skeleton, we evaluated the effects of pharmacological inhibition of the TGF-β type I receptor (TβRI) kinase on bone mass, architecture and material properties. Inhibition of TβRI function increased bone mass and multiple aspects of bone quality, including trabecular bone architecture and macro-mechanical behavior of vertebral bone. TβRI inhibitors achieved these effects by increasing osteoblast differentiation and bone formation, while reducing osteoclast differentiation and bone resorption. Furthermore, they induced the expression of Runx2 and EphB4, which promote osteoblast differentiation, and ephrinB2, which antagonizes osteoclast differentiation. Through these anabolic and anti-catabolic effects, TβRI inhibitors coordinate changes in multiple bone parameters, including bone mass, architecture, matrix mineral concentration and material properties, that collectively increase bone fracture resistance. Therefore, TβRI inhibitors may be effective in treating conditions of skeletal fragility

Three-Dimensional Geometric Analysis of Felid Limb Bone Allometry

Studies of bone allometry typically use simple measurements taken in a small number of locations per bone; often the midshaft diameter or joint surface area is compared to body mass or bone length. However, bones must fulfil multiple roles simultaneously with minimum cost to the animal while meeting the structural requirements imposed by behaviour and locomotion, and not exceeding its capacity for adaptation and repair. We use entire bone volumes from the forelimbs and hindlimbs of Felidae (cats) to investigate regional complexities in bone allometry.Computed tomographic (CT) images (16435 slices in 116 stacks) were made of 9 limb bones from each of 13 individuals of 9 feline species ranging in size from domestic cat (Felis catus) to tiger (Panthera tigris). Eleven geometric parameters were calculated for every CT slice and scaling exponents calculated at 5% increments along the entire length of each bone. Three-dimensional moments of inertia were calculated for each bone volume, and spherical radii were measured in the glenoid cavity, humeral head and femoral head. Allometry of the midshaft, moments of inertia and joint radii were determined. Allometry was highly variable and related to local bone function, with joint surfaces and muscle attachment sites generally showing stronger positive allometry than the midshaft.Examining whole bones revealed that bone allometry is strongly affected by regional variations in bone function, presumably through mechanical effects on bone modelling. Bone's phenotypic plasticity may be an advantage during rapid evolutionary divergence by allowing exploitation of the full size range that a morphotype can occupy. Felids show bone allometry rather than postural change across their size range, unlike similar-sized animals

Variability in the mechanical properties of bone, and its evolutionary consequences

The relative variabilities (coefficient of variation (CV)) of 10 different mechanical properties of compact bone were determined from 2166 measurements. All measures of variability were made on a minimum of four specimens from any bone. Three pre-yield properties had a CV of about 12%. Six post-yield properties had CVs varying from 24 to 46%. Pre-yield properties increase as a function of mineral content, whereas post-yield properties decrease. These differences give insight into mechanical phenomena occurring at different stages during loading. Furthermore, the fact that some properties are more tightly determined than others has implications for the optimum values set by natural selection. This assertion is made more rigorous using a simple mathematical model for the evolutionarily optimal allocation in a trade-off where one property is imprecisely determined. It is argued that in general the optimum will be biased in favour of the more tightly determined properties than would be the case if all properties had the same CV

GEOGRAPHICAL VARIATION IN THE STRENGTH OF THAIDID SNAIL SHELLS

Volume: 158Start Page: 383End Page: 38

Microcracking damage and the fracture process in relation to strain rate in human cortical bone tensile failure

It is difficult to define the 'physiological' mechanical properties of bone. Traumatic failures in-vivo are more likely to be orders of magnitude faster than the quasistatic tests usually employed in-vitro. We have reported recently [Hansen, U., Zioupos, P., Simpson, R., Currey, J.D., Hynd, D., 2008. The effect of strain rate on the mechanical properties of human cortical bone. Journal of Biomechanical Engineering/Transactions of the ASME 130, 011011-1-8] results from tests on specimens of human femoral cortical bone loaded in tension at strain rates (over(ε{lunate}, ̇)) ranging from low (0.08 s-1) to high (18 s-1). Across this strain rate range the modulus of elasticity generally increased, stress at yield and failure and strain at failure decreased for rates higher than 1 s-1, while strain at yield was invariant for most strain rates and only decreased at rates higher than 10 s-1. The results showed that strain rate has a stronger effect on post-yield deformation than on initiation of macroscopic yielding. In general, specimens loaded at high strain rates were brittle, while those loaded at low strain rates were much tougher. Here, a post-test examination of the microcracking damage reveals that microcracking was inversely related to the strain rate. Specimens loaded at low strain rates showed considerable post-yield strain and also much more microcracking. Partial correlation and regression analysis suggested that the development of post-yield strain was a function of the amount of microcracking incurred (the cause), rather than being a direct result of the strain rate (the excitation). Presumably low strain rates allow time for microcracking to develop, which increases the compliance of the specimen, making them tougher. This behaviour confirms a more general rule that the degree to which bone is brittle or tough depends on the amount of microcracking damage it is able to sustain. More importantly, the key to bone toughness is its ability to avoid a ductile-to-brittle transition for as long as possible during the deformation. The key to bone's brittleness, on the other hand, is the strain and damage localisation early on in the process, which leads to low post-yield strains and low-energy absorption to failure. © 2008 Elsevier Ltd. All rights reserved

Notch sensitivity of mammalian mineralized tissues in impact.

The toughness of bone is an important feature in preventing it from fracturing. We consider the notch sensitivity in impact, and the associations between brittleness, notch sensitivity and post-yield energy absorption of mammalian mineralized tissues. Specimens of bone-like tissues covering a wide range of mineralization were broken, either notched or un-notched, in impact. The greater the mineral content, the greater was the notch sensitivity. Also, the more brittle tissues dissipated the least post-yield energy and were the most notch sensitive. It is suggested that since antler bone, the least mineralized of all known mammalian mineralized tissues, seems to be notch insensitive in impact, no adaptive purpose would be served by having mineralized tissues of a lower mineralization than antler. This may explain the lower cut-off in mineralization seen in mammals