252 research outputs found
Experimental and analytical study on heat generation characteristics of a lithium-ion power battery
This document is the Accepted Manuscript version of the following article: Yongqi Xie, Shang Shi, Jincheng Tang, Hongwei Wu, and Jianzu Yu, ‘Experimental and analytical study on heat generation characteristics of a lithium-ion power battery’, International Journal of Heat and Mass Transfer, Vol. 122: 884-894, July 2018. Under embargo until 20 February 2019. The final, definitive version is available online via: https://doi.org/10.1016/j.ijheatmasstransfer.2018.02.038A combined experimental and analytical study has been performed to investigate the transient heat generation characteristics of a lithium-ion power battery in the present work. Experimental apparatus is newly built and the investigations on the charge/discharge characteristics and temperature rise behavior are carried out at ambient temperatures of 28 °C, 35 °C and 42 °C over the period of 1 C, 2 C, 3 C and 4 C rates. The thermal conductivity of a single battery cell is experimentally measured to be 5.22 W/(m K). A new transient model of heat generation rate based on the battery air cooling system is proposed. Comparison of the battery temperature between simulated results and experimental data is performed and good agreement is achieved. The impacts of the ambient temperature and charge/discharge rate on the heat generation rate are further analyzed. It is found that both ambient temperature and charge/discharge rate have significant influences on the voltage change and temperature rise as well as the heat generation rate. During charge/discharge process, the higher the current rate, the higher the heat generation rate. The effect of the ambient temperature on the heat generation demonstrates a remarkable difference at different charge states.Peer reviewe
Linear Scaling Calculations of Excitation Energies with Active-Space Particle-Particle Random Phase Approximation
We developed an efficient active-space particle-particle random phase
approximation (ppRPA) approach to calculate accurate charge-neutral excitation
energies of molecular systems. The active-space ppRPA approach constrains both
indexes in particle and hole pairs in the ppRPA matrix, which only selects
frontier orbitals with dominant contributions to low-lying excitation energies.
It employs the truncation in both orbital indexes in the particle-particle and
the hole-hole spaces. The resulting matrix, the eigenvalues of which are
excitation energies, has a dimension that is independent of the size of the
systems. The computational effort for the excitation energy calculation,
therefore, scales linearly with system size and is negligible compared with the
ground-state calculation of the (N-2)-electron system, where N is the electron
number of the molecule. With the active space consisting of 30 occupied and 30
virtual orbitals, the active-space ppRPA approach predicts excitation energies
of valence, charge-transfer, Rydberg, double and diradical excitations with the
mean absolute errors (MAEs) smaller than 0.03 eV compared with the full-space
ppRPA results. As a side product, we also applied the active-space ppRPA
approach in the renormalized singles (RS) T-matrix approach. Combining the
non-interacting pair approximation that approximates the contribution to the
self-energy outside the active space, the active-space
@PBE approach predicts accurate absolute and
relative core-level binding energies with the MAE around 1.58 eV and 0.3 eV,
respectively. The developed linear scaling calculation of excitation energies
is promising for applications to large and complex systems
Rapid dynamical mass segregation and properties of fractal star clusters
We investigate the evolution of young star clusters using N-body simulations.
We confirm that subvirial and fractal-structured clusters will dynamically mass
segregate on a short timescale (within 0.5 Myr). We adopt a modified
minimum-spanning-tree (MST) method to measure the degree of mass segregation,
demonstrating that the stars escaping from a cluster's potential are important
for the temporal dependence of mass segregation in the cluster. The form of the
initial velocity distribution will also affect the degree of mass segregation.
If it depends on radius, the outer parts of the cluster would expand without
undergoing collapse. In velocity space, we find 'inverse mass segregation,'
which indicates that massive stars have higher velocity dispersions than their
lower-mass counterparts.Comment: 13 pages and 6 figures based on 14 .eps file
Experimental and numerical investigation on conjugate performance of fan and heat exchanger of helicopter oil cooling system
© 2022 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY license. https://creativecommons.org/licenses/by/4.0/In this article, a combined experimental and numerical study has been performed to investigate the operating performance of axial fan and oil cooling system. A test rig was established, and six types of plate-fin heat exchangers (HEs) with offset strip and rectangular fins and three different flow lengths of 30 mm, 60 mm and 90 mm at air side were designed and manufactured. The performance of an axial fan with front guide vane was experimentally studied by two different adjusting modes: gradually increasing and decreasing air flow rate. The conjugate performances of the axial fan and different HEs were discussed in detail. Moreover, a three-dimensional (3D) model was developed to investigate the flow distribution of the system including fan and 30 mm offset strip fins HE at different flow rates. The results show that: (1) the total pressure performance curve of the axial fan under two adjusting modes could form a hysteresis region near the stall boundary. In the hysteresis region, the fan performance curves showed significant difference under both adjusting modes; (2) when the offset strip fins HE with large flow resistance is considered, the system could have two theoretical working points in the hysteresis region. For the case of HE with 90 mm offset strip fins, the flow rates of the system at two theoretical working points were 25.1 m³/min and 34.2 m³/min, and the heat transfer capacity of the HE were 23.1 kW and 27.5 kW, respectively. In the current experiment, it was found that the system operated at the point with smaller flow rate; (3) when the HE flow resistance exceeded a certain value, the boundary layer separation of the airflow could occur at the rotor blade. The separation had a small effect on the inlet airflow due to its turbulence kinetic energy was low and basically the same at each blade passage. Therefore, the system did not surge or stall at small flow rate.Peer reviewe
- …