Cleaner Chrome Tanning: Technology of low-chrome tanning without salt, pickling and short procedure

Content: Tannery effluent with high salinity and chromium have a serious environmental impact. The traditional chrome tannage that involved the use of sodium chloride, acid and chromium is one of the main origins of salt and chromium pollution. In this study, a non-pickling, low-chrome tanning technology was developed. The novel Chrome-free agent SL can be directly employed to tan bated cattle pelts and the wet white was obtained. Then the shaved wet white was pre-treated by Poly-carboxylate auxiliary agent and tanned by chrome powder. It was tested that the shrinkage temperature of the wet white, the initial pH of chrome tanning, the consumption of chrome powder, the shrinkage temperature of the chrome-tanned leather, the content of Cr2O3 in effluent, the absorption of chromium and the other properties of the chrome-tanned leather. It was found that the shrinkage temperature of the wet white tanned by SL reached over 80oC, the optimal consumption of Poly-carboxylate auxiliary agent was 2wt% based on the weight of the shaved wet white, the better low-chrome tanning conditions were that the wet white was tanned by 4wt% chromium powder for 150～180min at room temperature when the initial pH value was 3.5. The next processes were same as traditional chrome tannage. Meanwhile, the shrinkage temperature of the leather tanned by the low-chrome tannage reached more than 95oC, the absorption of chromium was 96%, the content of Cr2O3 in the effluent was under 200mg/L. For the low-chrome tanned leather, the absorption of dyestuff, fat-liquor reached 99.5%, 82.5% respectively. Compared with the traditional chrome tanned process, not only the conventional pickling process was eliminated, the process was been shorten and reduce the pollution of sodium chloride, but it can reduce 50% of the consumption of Chrome powder, improve the absorption of chromium and can reduce content of Cr2O3 in effluent. Take-Away: 1. LUO JIAN-XUN, LI JING, LIAO XUE-PIN,etc.Cleaner Chrome Tanning – A Non-Pickling Process Using an Aliphatic Aldehyde as Pre-tanning Agent. J. Soc. Leather. Technol.Chem. 2012,96 (1):21-26. 2.LUO JIAN-XUN,FENG YANJUAN.Cleaner Processing of Bovine Wet-white: Synthesis and Application of a Novel Chrome-free Tanning Agent Based on an Amphoteric Organic Compound. J. Soc. Leather. Technol.Chem. 2015,99 (4):190-195. 3.XU JIA-LI, LUO JIAN-XUN.Synthesis and application of a polycarboxylate auxiliary agent. China Leather.2017,46(3):35-41

ANALYSIS ON CONSTRUCTION DEFORMATION AND SUPPORTING STRUCTURE OF TWO-STEP AND THREESECTION EXCAVATION METHOD FOR SUPER LARGER SPAN HIGHWAY TUNNEL

The super larger span tunnel is a common form of highway reconstruction and expansionprojects in recent years. In order to determine the stability of tunnel structure of the two-step andthree-section excavation method of the III-level surrounding rock mass of the super larger spanhighway, the field test method was adopted. Relying on the Laohushan Tunnel in Jinan, Shandong,China, the deformation and the structure performance of the super larger span tunnel in III-levelsurrounding rock mass are analyzed, and the safety of the tunnel and the support structure isevaluated on this basis. The results show that the maximum settlement of the arch section of theGrade III surrounding rock section is 12.5mm, and the maximum clearance convergence is 5.8mm.Both of them are much smaller than the design reserved deformation of 80mm. The maximumpressure of the surrounding rock is 0.091MPa, showing that the force acting on the supportingstructure by surrounding rock mass is small. The inner and outer arched parts of the steel frameare subject to large stresses, and most of them are tensile stresses. The maximum stress of thesteel frame is 283 MPa, and occurs at the inner side of right arch waist. Although the local stressexceeds the yield strength of the steel (235 MPa), it does not exceed its ultimate compressivestrength of 400 MPa, and the tensile and compressive stress values of the other inner and outerparts do not exceed the yield strength. Mainly, the maximum stress appears on the left side wall,reaching 4.83 MPa, which is far less than the ultimate compressive strength of sprayed concrete(11.9 MPa). For super larger span highway tunnels, located in III-level surrounding rock mass,constructed by two-step and three-section excavation method, the initial support effectivelycontrolled the tunnel deformation, the supporting structures were fully protected and the tunnelstructure was stable. The super larger span tunnel is a common form in the road reconstructionand expansion project in recent years. In order to determine the stability of tunnel structure of thetwo steps and three excavation method of the III-level surrounding rock mass of the super largerspan highway, the field test method was adopted. Relying on the Laohushan Tunnel, thedeformation and the structure performance of the super larger span tunnel in III-level surroundingrock mass were analyzed. The results show that the maximum settlement of arch of the III-levelsurrounding rock mass is 12.5mm in super larger span highway tunnel, and the maximumclearance convergence is 5.8mm. Both of them are smaller than the design reserved deformationof 80mm. The maximum surrounding rock mass pressure is 0.091MPa, the force acting on thesupporting structure by surrounding rock mass are small. The inner and outer arched parts of the steel frame bear larger stress, and are mostly tensile stress. The maximum stress on inner side ofthe steel frame is 283 MPa, and occurs at the right arch waist. The maximum stress on the outerside of the steel frame is184 MPa, and occurs at the vault. The steel frame plays an important rolein the initial support, however the force does not reach the yield strength of the steel. The shotcreteis subjected to pressure, the maximum stress appears on the left side wall is 4.83 MPa, which ismuch smaller than the ultimate compressive strength of shotcrete of 25 MPa. So for super largerspan highway tunnels, located in III-level surrounding rock mass, constructed by two-step andthree-excavation method, the whole structure is stable

Theileria annulata Cyclophilin1 (TaCyp1) Interacts With Host Cell MED21

Host cells infected by Theileria annulata schizonts show the character of permanent proliferation in vitro, also named transformation. To explore the molecular mechanism a T. annulata Cyp1 (TaCyp1) protein potentially involved in regulating cell transformation was used as bait to screen for its interacting proteins by yeast-two-hybrid assay. Additional GST-pull down experiments confirmed that only MED21 specifically interacted with TaCyp1. Moreover, the distribution of TaCyp1 around T. annulata schizonts facilitated interaction with host cell MED21. As a component of mediator complex, MED21 is normally involved in regulating the transcription of nearly all RNA polymerase II-dependent genes. Therefore, to explore its influence on NF-κB signaling MED21 RNA interference and parasite killing with BW720c treatment were performed. Knock down of MED21 resulted in a significant decrease in NF-κB1/2 mRNA expressions, but no significant change in P105, P52 levels, nor detectable alteration in levels of phosphorylated IκBα/β. By contrast, BW720c treatment induced an obvious decrease in the phosphorylation status of P52 and IκBα/β, but no obvious change in that of P105. This suggests that BW720c-induced parasite death had a significant negative influence on NF-κB signaling, whereas knock down of MED21 had no obvious effect on NF-κB signaling. Characterization of TaCyp1 provides information on the function of parasite cyclophilins and leads to a better understanding of the interactions between T. annulata and its host leukocytes

Damage of shotcrete under freeze-thaw loading

The freeze-thaw durability of shotcrete can be improved by adding an air-entraining agent in cold areas. The main focus of this paper is to investigate the changes in the internal pore structure of C25 ordinary shotcrete and shot­crete mixed with a RM-YQ air-entraining agent using computed tomography (CT) scanning technique during freeze-thaw cycles. The macroscopic tests were conducted, including mass loss, dynamic modulus of elasticity and ultrasonic wave velocity tests. Results were compared, and the freeze-thaw durability characteristics of shotcrete mixed with the air-entraining agent were revealed. Adding an air-entraining agent could reduce the number of pores largely that ranged mainly from 0.01 mm2 to 1.00 mm2 (excluding the pores or bubbles < 0.01 mm2 because of the precision of the CT scan­ning system), and could therefore improve the initial pore structure of the formed shotcrete. During first few freeze-thaw cycles, just few small pores formed. After cement mortar fragmentations appeared, the number of small pores (0.01 mm2 to 0.50 mm2) in ordinary shotcrete increased significantly. The pore structure deteriorated largely. However, this could be prevented effectively by adding an air-entraining agent. Therefore, the freeze–thaw durability of shotcrete was improved

Analysis of Pipe-Roof in Tunnel Exiting Portal by the Foundation Elastic Model

The Pasternak double-parameter elastic foundation model of pipe-roof during the construction of tunnel exits is first established. Based on the portal project of Hanjiashan highway tunnel, an inclinometer is adopted to measure the settlement deformation of a pipe-roof and demonstrates the deformation law in tunnel exiting portals. The formulas for calculating the deflection and internal forces are derived to analyze the deformation of the pipe-roof in each excavation stage, and the results are compared with field monitoring data. Finally, the influences of excavation height, excavation footage, and stiffness of the pipe-roof on the support effect are investigated. Analysis indicates that the longitudinal settlement curve shows a groove distribution, which can be divided into five stages: micro, rapid, continuous, resilience, and stable deformation. Moreover, the subsidence rate reaches its maximum at the tunnel face. The influence of tunnel excavation on the deformation mainly has a range of 1.5 times the excavation height. To control the deflection of the pipe-roof, excavation height should be controlled in the range of 3.5 m, excavation footage should be controlled in the range of 1–1.4 m, and the diameter and thickness of the selected pipe-roof should be in the ranges of 89–159 mm and 5–8 mm, respectively

Improved drought resistance by intergeneric graftingin Salicaceae plants under water deficits

In this study, intergeneric grafting was employed between Populus cathayana and Salix rehderiana to investigate the grafting compatibility of the two Salicaceae plants and to reveal whether grafting can improve their drought resistance. Under different grafting combinations (P. cathayana scion with P. cathayana rootstock, P/P; P. cathayana scion with S. rehderiana rootstock, P/S; S. rehderiana scion with S. rehderiana rootstock, S/S; and S. rehderiana scion with P. cathayana rootstock, S/P), the survival and growth rate, biomass accumulation and allocation, photosynthetic traits, carbon isotope composition (delta C-13), relative water content (RWC) and nonstructural carbohydrates (NSCs) were measured. The results showed that the grafting compatibility between P. cathayana and S. rehderiana was very high, as the survival rates ranged from 76% to 100% under different grafting combinations. Drought significantly decreased growth, biomass accumulation, photosynthetic pigment contents, net photosynthesis rates (P) and RWC, and increased delta C-13 in all grafting combinations. Under drought stress, biomass accumulation, total chlorophyll, transpiration rate (E) and P-n were higher in P/P and P/S than in S/S and S/P. Compared with P/P, the growth rate, biomass accumulation, root/aboveground ratio (R/A ratio), carotenoid, RWC, starch and total soluble sugar (TSS) of P/S were less affected by drought. The height growth rate (GRH), R/A ratio, carotenoid, chlorophyll a, total chlorophyll, WUEi and TSS of S/P were lower than those of S/S under water-limited conditions. Moreover, a principal component analysis indicated that P/S and S/S had higher drought resistance than P/P and S/P under water deficits. The used method allows combining specific advantageous traits from P. cathayana and S. rehderiana, which may be a highly useful tool to enhance drought resistance in the cultivation of Salicaceae plants.Peer reviewe

Design of a Ka-band MW-level high efficiency gyroklystron for accelerators

Design of a three-cavity Ka-band MW-level gyroklystron operated at the fundamental TE02 mode is presented in this paper. The initial design of the magnetron injection gun (MIG) and interaction circuit has been completed by using the PIC (Particle in cell) code MAGIC. The PIC simulation shows this gyroklystron can deliver an output power of more than 1.5 MW with a gain of > 35 dB at 36 GHz. The achieved efficiency exceeds 40 % when driven by a 95 kV, 45 A beam. The optimized MIG has a transverse velocity spread of less than 2.5% when the velocity ratio is around 1.3

MicroRNA-275 and its target vitellogenin-2 are crucial in ovary development and blood digestion of Haemaphysalis longicornis

Background: The hard tick Haemaphysalis longicornis is widely distributed in eastern Asia, New Zealand and Australia and is considered the major vector of Theileria and Babesia, harmful parasites to humans and animals. Female ticks need successful blood meals to complete the life-cycle. Therefore, elucidation of the underlying molecular mechanisms of H. longicornis development and reproduction is considered important for developing control strategies against the tick and tick-borne pathogens. Methods: Luciferase assays were used to identify the targets of micro RNA miR-275 in vitro. RNAi of Vitellogenin (Vg) was used in phenotype rescue experiments of ticks with miR-275 inhibition, and these analyses were used to identify the authentic target of miR-275 in vivo. The expression of miR-275 in different tissues and developmental stages of ticks was assessed by real-time PCR. To elucidate the functions of miR-275 in female ticks, we injected a miR-275 antagomir into female ticks and observed the phenotypic changes. Statistical analyses were performed with GraphPad5 using Student’s t-test. Results: In this study, we identified Vg-2 as an authentic target of miR-275 both in vitro and in vivo by luciferase assays and phenotype rescue experiments. miR-275 plays the regulatory role in a tissue-specific manner and differentially in developmental stages. Silencing of miR-275 resulted in blood digestion problems, substantially impaired ovary development and significantly reduced egg mass (P < 0.0001). Furthermore, RNAi silencing of Vg-2 not only impacted the blood meal uptake (P < 0.05) but also the egg mass (P < 0.05). Significant rescue was observed in miR-275 knockout ticks when RNAi was applied to Vg-2. Conclusion: To our knowledge, this study is the first demonstration that miR-275 targets Vg-2 in H. longicornis and regulates the functions of blood digestion and ovary development. These findings improve the molecular understanding of tick development and reproduction

Detection and differentiation of Borrelia burgdorferi sensu lato in ticks collected from sheep and cattle in China

<p>Abstract</p> <p>Background</p> <p>Lyme disease caused by <it>Borrelia burgdorferi </it>sensu lato complex is an important endemic zoonosis whose distribution is closely related to the main ixodid tick vectors. In China, isolated cases of Lyme disease infection of humans have been reported in 29 provinces. Ticks, especially ixodid ticks are abundant and a wide arrange of <it>Borrelia </it>natural reservoirs are present. In this study, we developed a reverse line blot (RLB) to identify <it>Borrelia </it>spp. in ticks collected from sheep and cattle in 7 Provinces covering the main extensive livestock regions in China.</p> <p>Results</p> <p>Four species-specific RLB oligonucleotide probes were deduced from the spacer region between the 5S-23S rRNA gene, along with an oligonucleotide probe which was common to all. The species specific probes were shown to discriminate between four genomic groups of <it>B. burgdorferi </it>sensu lato i.e. <it>B. burgdorferi </it>sensu stricto, <it>B. garinii, B. afzelii</it>, and <it>B. valaisiana</it>, and to bind only to their respective target sequences, with no cross reaction to non target DNA. Furthermore, the RLB could detect between 0.1 pg and 1 pg of <it>Borrelia </it>DNA.</p> <p>A total of 723 tick samples (<it>Haemaphysalis, Boophilus, Rhipicephalus </it>and <it>Dermacentor</it>) from sheep and cattle were examined with RLB, and a subset of 667 corresponding samples were examined with PCR as a comparison. The overall infection rate detected with RLB was higher than that of the PCR test.</p> <p>The infection rate of <it>B. burgdoreri </it>sensu stricto was 40% in south areas; while the <it>B. garinii infection rate </it>was 40% in north areas. The highest detection rates of <it>B. afzelii </it>and <it>B. valaisiana </it>were 28% and 22%, respectively. Mixed infections were also found in 7% of the ticks analyzed, mainly in the North. The proportion of <it>B. garinii </it>genotype in ticks was overall highest at 34% in the whole investigation area.</p> <p>Conclusion</p> <p>In this study, the RLB assay was used to detect <it>B. burgdorferi </it>sensu lato in ticks collected from sheep and cattle in China. The results showed that <it>B. burdorferi senso stricto </it>and <it>B. afzelii </it>were mainly distributed in the South; while <it>B. garinii </it>and <it>B. valaisiana </it>were dominant in the North. <it>Borrelia </it>spirochaetes were detected in <it>Rhipicephalus </it>spp for the first time. It is suggested that the <it>Rhipicephalus </it>spps might play a role in transmitting <it>Borrelia </it>spirochaetes.</p