1,135 research outputs found
Modeling electrically small structures in layered medium with augmented EFIE method
Electrically small structures embedded in a planarly layered medium are modeled by the augmented electric field integral equation (EFIE) method in this paper. By separating charge as extra unknown list, and enforcing the current continuity equation, an augmented EFIE (A-EFIE) can be setup. The matrix-friendly formulation of layered medium Green's function is applied and the frequency scaling of the impedance matrix in the moment method is analyzed when the frequency tends to zero. Rank deficiency and the charge neutrality enforcement is also discussed in detail. Numerical results show that the low frequency breakdown of electrically small structures embedded in a layered medium can be effectively remedied by this A-EFIE method. © 2011 IEEE.published_or_final_versionThe 2011 IEEE International Symposium on Antennas and Propagation (APSURSI), Spokane, WA., 3-8 July 2011. In IEEE APSURSI Digest, 2011, p. 3218-322
An augmented electric field integral equation for layered medium Green's function
This paper proposes an augmented electric field integral equation (A-EFIE) for layered medium Green's function. The newly developed matrix-friendly formulation of layered medium Green's function is applied in this method. By separating charge as extra unknown list, and enforcing the current continuity equation, the traditional EFIE can be cast into a generalized saddle-point system. Frequency scaling for the matrix-friendly formulation is analyzed when frequency tends to zero. Rank deficiency and the charge neutrality enforcement of the A-EFIE for layered medium Green's function is discussed in detail. The electrostatic limit of the A-EFIE is also analyzed. Without any topological loop-searching algorithm, electrically small conducting structures embedded in a general layered medium can be simulated by using this new A-EFIE formulation. Several numerical results are presented to validate this method at the end of this paper. © 2010 IEEE.published_or_final_versio
Solving multi-scale low frequency electromagnetic problems
In this paper, we will discuss two methods to tackle the low-frequency, multi-scale electromagnetics problem. First we will discuss the augmented electric field integral equation (AEFIE), and then, we will discuss the equivalence principle algorithm (EPA). The AEFIE allows the solution of such problems without the need to perform a loop search of a complex structure. The EPA allows the separation of circuit physics from wave physics in a multiscale problem. Hybridization of these two methods will be discussed.published_or_final_versionThe 4th European Conference on Antennas and Propagation (EuCAP) 2010, Barcelona, Spain, 12-16 April 2010. In Proceedings of the 4th EuCAP, 2010, p. 1-
Review of multi-scale electromagnetic modeling
This paper reviews various methods to solve multiscale problems ranging from low-frequency methods to very high-frequency methods. ©2010 IEEE.published_or_final_versionThe 2010 International Conference on Electromagnetics in Advanced Applications (ICEAA), Sydney, N.S.W., 20-24 September 2010. In Proceedings of ICEAA'10, 2010, p. 641-64
Phase Separation and Magnetic Order in K-doped Iron Selenide Superconductor
Alkali-doped iron selenide is the latest member of high Tc superconductor
family, and its peculiar characters have immediately attracted extensive
attention. We prepared high-quality potassium-doped iron selenide (KxFe2-ySe2)
thin films by molecular beam epitaxy and unambiguously demonstrated the
existence of phase separation, which is currently under debate, in this
material using scanning tunneling microscopy and spectroscopy. The
stoichiometric superconducting phase KFe2Se2 contains no iron vacancies, while
the insulating phase has a \surd5\times\surd5 vacancy order. The iron vacancies
are shown always destructive to superconductivity in KFe2Se2. Our study on the
subgap bound states induced by the iron vacancies further reveals a
magnetically-related bipartite order in the superconducting phase. These
findings not only solve the existing controversies in the atomic and electronic
structures in KxFe2-ySe2, but also provide valuable information on
understanding the superconductivity and its interplay with magnetism in
iron-based superconductors
Wrist-Worn Wearables Based on Force Myography: On the Significance of User Anthropometry
Background
Force myography (FMG) is a non-invasive technology used to track functional movements and hand gestures by sensing volumetric changes in the limbs caused by muscle contraction. Force transmission through tissue implies that differences in tissue mechanics and/or architecture might impact FMG signal acquisition and the accuracy of gesture classifier models. The aim of this study is to identify if and how user anthropometry affects the quality of FMG signal acquisition and the performance of machine learning models trained to classify different hand and wrist gestures based on that data.
Methods
Wrist and forearm anthropometric measures were collected from a total of 21 volunteers aged between 22 and 82 years old. Participants performed a set of tasks while wearing a custom-designed FMG band. Primary outcome measure was the Spearman’s correlation coefficient (R) between the anthropometric measures and FMG signal quality/ML model performance.
Results
Results demonstrated moderate (0.3 ≤|R| < 0.67) and strong (0.67 ≤ |R|) relationships for ratio of skinfold thickness to forearm circumference, grip strength and ratio of wrist to forearm circumference. These anthropometric features contributed to 23–30% of the variability in FMG signal acquisition and as much as 50% of the variability in classification accuracy for single gestures.
Conclusions
Increased grip strength, larger forearm girth, and smaller skinfold-to-forearm circumference ratio improve signal quality and gesture classification accuracy
Preparation of Fe3O4Spherical Nanoporous Particles Facilitated by Polyethylene Glycol 4000
Much interest has been attracted to the magnetic materials with porous structure because of their unique properties and potential applications. In this report, Fe3O4nanoporous particles assembled from small Fe3O4nanoparticles have been prepared by thermal decomposition of iron acetylacetonate in the presence of polyethylene glycol 4000. The size of the spherical nanoporous particles is 100–200 nm. Surface area measurement shows that these Fe3O4nanoporous particles have a high surface area of 87.5 m2/g. Magnetization measurement and Mössbauer spectrum indicate that these particles are nearly superparamagnetic at room temperature. It is found that the morphology of the products is greatly influenced by polyethylene glycol concentration and the polymerization degree of polyethylene glycol. Polyethylene glycol molecules are believed to facilitate the formation of the spherical assembly
The Interaction between the First Transmembrane Domain and the Thumb of ASIC1a Is Critical for Its N-Glycosylation and Trafficking
Acid-sensing ion channel-1a (ASIC1a), the primary proton receptor in the brain, contributes to multiple diseases including stroke, epilepsy and multiple sclerosis. Thus, a better understanding of its biogenesis will provide important insights into the regulation of ASIC1a in diseases. Interestingly, ASIC1a contains a large, yet well organized ectodomain, which suggests the hypothesis that correct formation of domain-domain interactions at the extracellular side is a key regulatory step for ASIC1a maturation and trafficking. We tested this hypothesis here by focusing on the interaction between the first transmembrane domain (TM1) and the thumb of ASIC1a, an interaction known to be critical in channel gating. We mutated Tyr71 and Trp287, two key residues involved in the TM1-thumb interaction in mouse ASIC1a, and found that both Y71G and W287G decreased synaptic targeting and surface expression of ASIC1a. These defects were likely due to altered folding; both mutants showed increased resistance to tryptic cleavage, suggesting a change in conformation. Moreover, both mutants lacked the maturation of N-linked glycans through mid to late Golgi. These data suggest that disrupting the interaction between TM1 and thumb alters ASIC1a folding, impedes its glycosylation and reduces its trafficking. Moreover, reducing the culture temperature, an approach commonly used to facilitate protein folding, increased ASIC1a glycosylation, surface expression, current density and slowed the rate of desensitization. These results suggest that correct folding of extracellular ectodomain plays a critical role in ASIC1a biogenesis and function
Inherent Dynamics of the Acid-Sensing Ion Channel 1 Correlates with the Gating Mechanism
A combination of computational and experimental approaches reveals the dynamics of ASIC1 gating, involving a deformation of the channel that triggers “twist-to-open” motions of the channel pore
Observation of a ppb mass threshoud enhancement in \psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p}) decay
The decay channel
is studied using a sample of events collected
by the BESIII experiment at BEPCII. A strong enhancement at threshold is
observed in the invariant mass spectrum. The enhancement can be fit
with an -wave Breit-Wigner resonance function with a resulting peak mass of
and a
narrow width that is at the 90% confidence level.
These results are consistent with published BESII results. These mass and width
values do not match with those of any known meson resonance.Comment: 5 pages, 3 figures, submitted to Chinese Physics
- …