Amplitude to phase conversion of InGaAs pin photo-diodes for femtosecond lasers microwave signal generation

When a photo-diode is illuminated by a pulse train from a femtosecond laser, it generates microwaves components at the harmonics of the repetition rate within its bandwidth. The phase of these components (relative to the optical pulse train) is known to be dependent on the optical energy per pulse. We present an experimental study of this dependence in InGaAs pin photo-diodes illuminated with ultra-short pulses generated by an Erbium-doped fiber based femtosecond laser. The energy to phase dependence is measured over a large range of impinging pulse energies near and above saturation for two typical detectors, commonly used in optical frequency metrology with femtosecond laser based optical frequency combs. When scanning the optical pulse energy, the coefficient which relates phase variations to energy variations is found to alternate between positive and negative values, with many (for high harmonics of the repetition rate) vanishing points. By operating the system near one of these vanishing points, the typical amplitude noise level of commercial-core fiber-based femtosecond lasers is sufficiently low to generate state-of-the-art ultra-low phase noise microwave signals, virtually immune to amplitude to phase conversion related noise.Comment: 7 pages, 6 figures, submitted to Applied Physics

Modified Norris–Landzberg Model and Optimum Design of Temperature Cycling ALT

Accelerated life testing (ALT) is an effective way to assess the lifetime of a product. Due to the complex nature of its testing profile, it is difficult to carry out temperature cycling ALT. This paper establishes a modified Norris–Landzberg model as acceleration model, and proposes the optimum design method of temperature cycling ALT. First, the FEA method is used to study the influence of temperature cycling profile parameters on the thermal fatigue life of 63Sn–37Pb solder joints. Then, a modified Norris–Landzberg model is proposed by introducing ramp time and dwell time with an added weight value. Finally, the temperature cycling ALT is regarded as a special multi-stress ALT to study its optimum design method. The uniform design theory is used to determine the combined mode. The optimum model is established with the objective of minimizing the asymptotic variance of the estimation of median lifetime under normal use conditions, and the simulation example shows the workability of the proposed method

Motion corrected 3D reconstruction of the fetal thorax from prenatal MRI

In this paper we present a semi-automatic method for analysis of the fetal thorax in genuine three-dimensional volumes. After one initial click we localize the spine and accurately determine the volume of the fetal lung from high resolution volumetric images reconstructed from motion corrupted prenatal Magnetic Resonance Imaging (MRI). We compare the current state-of-the-art method of segmenting the lung in a slice-by-slice manner with the most recent multi-scan reconstruction methods. We use fast rotation invariant spherical harmonics image descriptors with Classification Forest ensemble learning methods to extract the spinal cord and show an efficient way to generate a segmentation prior for the fetal lung from this information for two different MRI field strengths. The spinal cord can be segmented with a DICE coefficient of 0.89 and the automatic lung segmentation has been evaluated with a DICE coefficient of 0.87. We evaluate our method on 29 fetuses with a gestational age (GA) between 20 and 38 weeks and show that our computed segmentations and the manual ground truth correlate well with the recorded values in literature

Dynamics of a deformable self-propelled particle under external forcing

We investigate dynamics of a self-propelled deformable particle under external field in two dimensions based on the model equations for the center of mass and a tensor variable characterizing deformations. We consider two kinds of external force. One is a gravitational-like force which enters additively in the time-evolution equation for the center of mass. The other is an electric-like force supposing that a dipole moment is induced in the particle. This force is added to the equation for the deformation tensor. It is shown that a rich variety of dynamics appears by changing the strength of the forces and the migration velocity of self-propelled particle

Paramagnetic effect in YBaCuO grain boundary junctions

A detailed investigation of the magnetic response of YBaCuO grain boundary Josephson junctions has been carried out using both radio-frequency measurements and Scanning SQUID Microscopy. In a nominally zero-field-cooled regime we observed a paramagnetic response at low external fields for 45 degree asymmetric grain boundaries. We argue that the observed phenomenology results from the d-wave order parameter symmetry and depends on Andreev bound states.Comment: To be published in Phys. Rev.

Zitterbewegung in External Magnetic Field: Classic versus Quantum Approach

We investigate variations of the Zitterbewegung frequency of electron due to an external static and uniform magnetic field employing the expectation value quantum approach, and compare our results with the classical model of spinning particles. We demonstrate that these two so far compatible approaches are not in agreement in the presence of an external uniform static magnetic field, in which the classical approach breaks the usual symmetry of free particles and antiparticles states, i.e. it leads to CP violation. Hence, regarding the Zitterbewegung frequency of electron, the classical approach in the presence of an external magnetic field is unlikely to correctly describe the spin of electron, while the quantum approach does, as expected. We also show that the results obtained via the expectation value are in close agreement with the quantum approach of the Heisenberg picture derived in the literature. However, the method we use is capable of being compared with the classical approach regarding the spin aspects. The classical interpretation of spin produced by the altered Zitterbewegung frequency, in the presence of an external magnetic field, are discussed.Comment: 16 pages, no figure

Hadron yields and spectra in Au+Au collisions at the AGS

Inclusive double differential multiplicities and rapidity density distributions of hadrons are presented for 10.8 A GeV/c Au+Au collisions as measured at the AGS by the E877 collaboration. The results indicate that large amounts of stopping and collective transverse flow effects are present. The data are also compared to the results from the lighter Si+Al system.Comment: 12 pages, latex, 10 figures, submitted to Nuclear Physics A (Quark Matter 1996 Proceedings

Tensor network states and geometry

Tensor network states are used to approximate ground states of local Hamiltonians on a lattice in D spatial dimensions. Different types of tensor network states can be seen to generate different geometries. Matrix product states (MPS) in D=1 dimensions, as well as projected entangled pair states (PEPS) in D>1 dimensions, reproduce the D-dimensional physical geometry of the lattice model; in contrast, the multi-scale entanglement renormalization ansatz (MERA) generates a (D+1)-dimensional holographic geometry. Here we focus on homogeneous tensor networks, where all the tensors in the network are copies of the same tensor, and argue that certain structural properties of the resulting many-body states are preconditioned by the geometry of the tensor network and are therefore largely independent of the choice of variational parameters. Indeed, the asymptotic decay of correlations in homogeneous MPS and MERA for D=1 systems is seen to be determined by the structure of geodesics in the physical and holographic geometries, respectively; whereas the asymptotic scaling of entanglement entropy is seen to always obey a simple boundary law -- that is, again in the relevant geometry. This geometrical interpretation offers a simple and unifying framework to understand the structural properties of, and helps clarify the relation between, different tensor network states. In addition, it has recently motivated the branching MERA, a generalization of the MERA capable of reproducing violations of the entropic boundary law in D>1 dimensions.Comment: 18 pages, 18 figure

\psi(2S) Decays into \J plus Two Photons

Using \gamma \gamma J/\psi, J/\psi \ra e^+ e^- and $\mu^+ \mu^-$ events from a sample of $14.0\times 10^6$ \psip decays collected with the BESII detector, the branching fractions for \psip\ra \pi^0\J, \eta\J, and \psi(2S)\ar\gamma\chi_{c1},\gamma\chi_{c2}\ar\gamma\gamma\jpsi are measured to be B(\psip\ra \pi^0\J) = (1.43\pm0.14\pm0.13)\times 10^{-3}, B(\psip\ra \eta\J) = (2.98\pm0.09\pm0.23)%, B(\psi(2S)\ar\gamma\chi_{c1}\ar\gamma\gamma\jpsi) = (2.81\pm0.05\pm 0.23)%, and B(\psi(2S)\ar\gamma\chi_{c2}\ar\gamma\gamma\jpsi) = (1.62\pm0.04\pm 0.12)%.Comment: 7 pages, 6 figures. submitted to Phys. Rev.