Semisolid processing characteristics of AM series Mg alloys by rheo-diecasting

The official published version of this Article can be found at the link below - Copyright @ 2006 ASM InternationalAn investigation has been made into the solidification behavior and microstructural evolution of AM50, AM70, and AM90 alloys during rheo-diecasting, their processibility, and the resulting mechanical properties. It was found that solidification of AM series alloys under intensive melt shearing in the unique twin-screw slurry maker during rheo-diecasting gave rise to numerous spheroidal primary magnesium (Mg) particles that were uniformly present in the microstructure. As a result, the network of the beta-Mg17Al12 phase was consistently interrupted by these spheroidal and ductile particles. Such a microstructure reduced the obstacle of deformation and the harmfulness of the beta-Mg17Al12 network on ductility, and therefore improved the ductility of rheo-diecast AM alloys. It was shown that, even with 9 wt pct Al, the elongation of rheo-diecast AM90 still achieved (9 +/- 1.2) pct. Rheodiecasting thus provides an attractive processing route for upgrading the alloy specification of AM series alloys by increasing the aluminum (Al) content while ensuring ductility. Assessment of the processibility of AM series alloys for semisolid processing showed that high Al content AM series alloys are more suitable for rheo-diecasting than low Al content alloys, because of the lower sensitivity of solid fraction to temperature, the lower liquidus temperature, and the smaller interval between the semisolid processing temperature and the complete solidification temperature.This work is supported by the EPSR

Classes of exact wavefunctions for general time-dependent Dirac Hamiltonians in 1+1 dimensions

In this work we construct two classes of exact solutions for the most general time-dependent Dirac Hamiltonian in 1+1 dimensions. Some problems regarding to some formal solutions in the literature are discussed. Finally the existence of a generalized Lewis-Riesenfeld invariant connected with such solutions is discussed

Effective Theoretical Approach to Back Reaction of the Dynamical Casimir Effect in 1+1 Dimensions

We present an approach to studying the Casimir effects by means of the effective theory. An essential point of our approach is replacing the mirror separation into the size of space S^1 in the adiabatic approximation. It is natural to identify the size of space S^1 with the scale factor of the Robertson-Walker-type metric. This replacement simplifies the construction of a class of effective models to study the Casimir effects. To check the validity of this replacement we construct a model for a scalar field coupling to the two-dimensional gravity and calculate the Casimir effects by the effective action for the variable scale factor. Our effective action consists of the classical kinetic term of the mirror separation and the quantum correction derived by the path-integral method. The quantum correction naturally contains both the Casimir energy term and the back-reaction term of the dynamical Casimir effect, the latter of which is expressed by the conformal anomaly. The resultant effective action describes the dynamical vacuum pressure, i.e., the dynamical Casimir force. We confirm that the force depends on the relative velocity of the mirrors, and that it is always attractive and stronger than the static Casimir force within the adiabatic approximation.Comment: Published Version, 16 pages, LaTeX2e with graphics package, 1 figur

Quantum electromagnetic field in a three dimensional oscillating cavity

We compute the photon creation inside a perfectly conducting, three dimensional oscillating cavity, taking the polarization of the electromagnetic field into account. As the boundary conditions for this field are both of Dirichlet and (generalized) Neumann type, we analyze as a preliminary step the dynamical Casimir effect for a scalar field satisfying generalized Neumann boundary conditions. We show that particle production is enhanced with respect to the case of Dirichlet boundary conditions. Then we consider the transverse electric and transverse magnetic polarizations of the electromagnetic field. For resonant frequencies, the total number of photons grows exponentially in time for both polarizations, the rate being greater for transverse magnetic modes.Comment: 11 pages, 1 figur

Resonant photon creation in a three dimensional oscillating cavity

We analyze the problem of photon creation inside a perfectly conducting, rectangular, three dimensional cavity with one oscillating wall. For some particular values of the frequency of the oscillations the system is resonant. We solve the field equation using multiple scale analysis and show that the total number of photons inside the cavity grows exponentially in time. This is also the case for slightly off-resonance situations. Although the spectrum of a cavity is in general non equidistant, we show that the modes of the electromagnetic field can be coupled, and that the rate of photon creation strongly depends on this coupling. We also analyze the thermal enhancement of the photon creation.Comment: 13 pages. New section on off-resonance motion is included. To appear in Physical Review

Drell-Yan production at small q_T, transverse parton distributions and the collinear anomaly

Using methods from effective field theory, an exact all-order expression for the Drell-Yan cross section at small transverse momentum is derived directly in q_T space, in which all large logarithms are resummed. The anomalous dimensions and matching coefficients necessary for resummation at NNLL order are given explicitly. The precise relation between our result and the Collins-Soper-Sterman formula is discussed, and as a by-product the previously unknown three-loop coefficient A^(3) is obtained. The naive factorization of the cross section at small transverse momentum is broken by a collinear anomaly, which prevents a process-independent definition of x_T-dependent parton distribution functions. A factorization theorem is derived for the product of two such functions, in which the dependence on the hard momentum transfer is separated out. The remainder factors into a product of two functions of longitudinal momentum variables and x_T^2, whose renormalization-group evolution is derived and solved in closed form. The matching of these functions at small x_T onto standard parton distributions is calculated at O(alpha_s), while their anomalous dimensions are known to three loops.Comment: 32 pages, 2 figures; version to appear in Eur. Phys. J.

Andreev Reflection in Ferromagnet/Superconductor/Ferromagnet Double Junction Systems

We present a theory of Andreev reflection in a ferromagnet/superconductor/ferromagnet double junction system. The spin polarized quasiparticles penetrate to the superconductor in the range of penetration depth from the interface by the Andreev reflection. When the thickness of the superconductor is comparable to or smaller than the penetration depth, the spin polarized quasiparticles pass through the superconductor and therefore the electric current depends on the relative orientation of magnetizations of the ferromagnets. The dependences of the magnetoresistance on the thickness of the superconductor, temperature, the exchange field of the ferromagnets and the height of the interfacial barriers are analyzed. Our theory explains recent experimental results well.Comment: 8 pages, 9 figures, submitted to Phys. Rev.

Anomaly analysis of Hawking radiation from Kaluza-Klein black hole with squashed horizon

Considering gravitational and gauge anomalies at the horizon, a new method that to derive Hawking radiations from black holes has been developed by Wilczek et al. In this paper, we apply this method to non-rotating and rotating Kaluza-Klein black holes with squashed horizon, respectively. For the rotating case, we found that, after the dimensional reduction, an effective U(1) gauge field is generated by an angular isometry. The results show that the gauge current and energy-momentum tensor fluxes are exactly equivalent to Hawking radiation from the event horizon.Comment: 15 pages, no figures, the improved version, accepted by Eur. Phys. J.

Measurements of the observed cross sections for e+e−→e^+e^-\to exclusive light hadrons containing π0π0\pi^0\pi^0 at s=3.773\sqrt s= 3.773, 3.650 and 3.6648 GeV

By analyzing the data sets of 17.3, 6.5 and 1.0 pb$^{-1}$ taken, respectively, at $\sqrt s= 3.773$, 3.650 and 3.6648 GeV with the BES-II detector at the BEPC collider, we measure the observed cross sections for $e^+e^-\to \pi^+\pi^-\pi^0\pi^0$, $K^+K^-\pi^0\pi^0$, $2(\pi^+\pi^-\pi^0)$, $K^+K^-\pi^+\pi^-\pi^0\pi^0$ and $3(\pi^+\pi^-)\pi^0\pi^0$ at the three energy points. Based on these cross sections we set the upper limits on the observed cross sections and the branching fractions for $\psi(3770)$ decay into these final states at 90% C.L..Comment: 7 pages, 2 figure

Partial wave analysis of J/\psi \to \gamma \phi \phi

Using $5.8 \times 10^7 J/\psi$ events collected in the BESII detector, the radiative decay $J/\psi \to \gamma \phi \phi \to \gamma K^+ K^- K^0_S K^0_L$ is studied. The $\phi\phi$ invariant mass distribution exhibits a near-threshold enhancement that peaks around 2.24 GeV/$c^{2}$. A partial wave analysis shows that the structure is dominated by a $0^{-+}$ state ($\eta(2225)$) with a mass of $2.24^{+0.03}_{-0.02}{}^{+0.03}_{-0.02}$ GeV/$c^{2}$ and a width of $0.19 \pm 0.03^{+0.06}_{-0.04}$ GeV/$c^{2}$. The product branching fraction is: $Br(J/\psi \to \gamma \eta(2225))\cdot Br(\eta(2225)\to \phi\phi) = (4.4 \pm 0.4 \pm 0.8)\times 10^{-4}$.Comment: 11 pages, 4 figures. corrected proof for journa