Large eddy simulation of plume dispersion behind an aircraft in the take-off phase

The aim of this paper is to provide an investigation, using large eddy simulation, into plume dispersion behind an aircraft in co-flowing take-off conditions. Validation studies of the computational model were presented by Aloysius and Wrobel (Environ Model Softw 24:929–937, 2009) and a study of the flow and dispersion properties of a double-engine aircraft jetwas presented by Aloysius et al. EEC/SEE/2007/001,EUROCONTROLExperimentalCentre, http://www.eurocontrol.int/eec/gallery/content/public/document/eec/report/2007/ 032_ALAQS_comparison_of_CFD_and_Lagrangian_dispersion_methods.pdf), in which only the engine was modelled. In this paper, the complete geometry of a Boeing 737 is modelled and investigated. The currentwork represents a contribution towards a better understanding of the source dynamics behind an airplane jet engine during the take-off and landing phases. The information provided from these simulations will be useful for future improvements of existing dispersion models

Delivering organisational adaptation through legislative mechanisms: Evidence from the Adaptation Reporting Power (Climate Change Act 2008)

There is increasing recognition that organisations, particularly in key infrastructure sectors, are potentially vulnerable to climate change and extreme weather events, and require organisational responses to ensure they are resilient and adaptive. However, detailed evidence of how adaptation is facilitated, implemented and reported, particularly through legislative mechanisms is lacking. The United Kingdom Climate Change Act (2008), introduced the Adaptation Reporting Power, enabling the Government to direct so-called reporting authorities to report their climate change risks and adaptation plans. We describe the authors' unique role and experience supporting the Department for Environment, Food and Rural Affairs (Defra) during the Adaptation Reporting Power's first round. An evaluation framework, used to review the adaptation reports, is presented alongside evidence on how the process provides new insights into adaptation activities and triggered organisational change in 78% of reporting authorities, including the embedding of climate risk and adaptation issues. The role of legislative mechanisms and risk-based approaches in driving and delivering adaptation is discussed alongside future research needs, including the development of organisational maturity models to determine resilient and well adapting organisations. The Adaptation Reporting Power process provides a basis for similar initiatives in other countries, although a clear engagement strategy to ensure buy-in to the process and research on its long-term legacy, including the potential merits of voluntary approaches, is required

ESPRESS.0: Eustachian Tube-Inspired Tactile Sensor Exploiting Pneumatics for Range Extension and SenSitivity Tuning

Optimising the sensitivity of a tactile sensor to a specific range of stimuli magnitude usually compromises the sensor’s widespread usage. This paper presents a novel soft tactile sensor capable of dynamically tuning its stiffness for enhanced sensitivity across a range of applied forces, taking inspiration from the Eustachian tube in the mammalian ear. The sensor exploits an adjustable pneumatic back pressure to control the effective stiffness of its 20 mm diameter elastomer interface. An internally translocated fluid is coupled to the membrane and optically tracked to measure physical interactions at the interface. The sensor can be actuated by pneumatic pressure to dynamically adjust its stiffness. It is demonstrated to detect forces as small as 0.012 N, and to be sensitive to a difference of 0.006 N in the force range of 35 to 40 N. The sensor is demonstrated to be capable of detecting tactile cues on the surface of objects in the sub-millimetre scale. It is able to adapt its compliance to increase its ability for distinguishing between stimuli with similar stiffnesses (0.181 N/mm difference) over a large range (0.1 to 1.1 N/mm) from only a 0.6 mm deep palpation. The sensor is intended to interact comfortably with skin, and the feasibility of its use in palpating tissue in search of hard inclusions is demonstrated by locating and estimating the size of a synthetic hard node embedded 20 mm deep in a soft silicone sample. The results suggest that the sensor is a good candidate for tactile tasks involving unpredictable or unknown stimuli

Monitoring of Biodiesel Transesterification Process Using Impedance Measurement

Transesterification is commonly used to produce biodiesel from methylester. In order to control the conversion process it is often useful to employ process monitoring and in particular monitor the mass transfer processes that limit the initial reaction rates. Such monitoring of the initial phase of reaction may provide opportunity for process optimization. Previous work has identified many methods to monitor reaction progress. This paper proposes the use of a simple method which is able to provide information regarding the progress of mass transfer and chemical reaction during biodiesel production. The process uses impedance measurement. The experimentally determined impedance results clearly show the two important phases of the transesterification reaction, a mass transfer control phase followed by a kinetically controlled phase

A Comparison of Cranial Cavity Extraction Tools for Non-contrast Enhanced CT Scans in Acute Stroke Patients

Cranial cavity extraction is often the first step in quantitative neuroimaging analyses. However, few automated, validated extraction tools have been developed for non-contrast enhanced CT scans (NECT). The purpose of this study was to compare and contrast freely available tools in an unseen dataset of real-world clinical NECT head scans in order to assess the performance and generalisability of these tools. This study included data from a demographically representative sample of 428 patients who had completed NECT scans following hospitalisation for stroke. In a subset of the scans (n = 20), the intracranial spaces were segmented using automated tools and compared to the gold standard of manual delineation to calculate accuracy, precision, recall, and dice similarity coefficient (DSC) values. Further, three readers independently performed regional visual comparisons of the quality of the results in a larger dataset (n = 428). Three tools were found; one of these had unreliable performance so subsequent evaluation was discontinued. The remaining tools included one that was adapted from the FMRIB software library (fBET) and a convolutional neural network- based tool (rBET). Quantitative comparison showed comparable accuracy, precision, recall and DSC values (fBET: 0.984 ± 0.002; rBET: 0.984 ± 0.003; p = 0.99) between the tools; however, intracranial volume was overestimated. Visual comparisons identified characteristic regional differences in the resulting cranial cavity segmentations. Overall fBET had highest visual quality ratings and was preferred by the readers in the majority of subject results (84%). However, both tools produced high quality extractions of the intracranial space and our findings should improve confidence in these automated CT tools. Pre- and post-processing techniques may further improve these results. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s12021-021-09534-7

Fabric first: is it still the right approach?

‘Fabric first’ describes an approach to improving the thermal performance of residential buildings by prioritising the improvement of fabric. It has historically been widely advocated. However, the urgency of complete decarbonisation challenges this approach in existing buildings. Heat decarbonisation is necessary to deliver zero-carbon goals. In many cases, no additional fabric improvement is needed to decarbonise heating; a heat pump, or other zero-carbon heat supply, will be enough. Retrofitting fabric first may not be feasible across the whole housing stock on timescales necessary for rapid decarbonisation and could therefore slow housing decarbonisation. However, fabric improvement will continue to have an important role. Energy use in buildings with a ‘heat pump only’ retrofit will be higher than if insulation were also improved. Fabric should continue to be prioritised in new buildings and where low-cost insulation measures are available. Fabric improvement can have other benefits: lower running costs, improved comfort, reduced damp risk, better heat pump performance, reduced overheating risk and lower requirements for electricity capacity increases. The suitability of a heat-pump-only approach to building decarbonisation should therefore be decided building by building. For national building stocks, complete decarbonisation of heating systems is required, but stock average fabric improvement may be 30–50%

The Analyticity of a Generalized Ruelle's Operator

In this work we propose a generalization of the concept of Ruelle operator for one dimensional lattices used in thermodynamic formalism and ergodic optimization, which we call generalized Ruelle operator, that generalizes both the Ruelle operator proposed in [BCLMS] and the Perron Frobenius operator defined in [Bowen]. We suppose the alphabet is given by a compact metric space, and consider a general a-priori measure to define the operator. We also consider the case where the set of symbols that can follow a given symbol of the alphabet depends on such symbol, which is an extension of the original concept of transition matrices from the theory of subshifts of finite type. We prove the analyticity of the Ruelle operator and present some examples

6-Deoxyhexoses froml-Rhamnose in the Search for Inducers of the Rhamnose Operon: Synergy of Chemistry and Biotechnology

In the search for alternative non‐metabolizable inducers in the l ‐rhamnose promoter system, the synthesis of fifteen 6‐deoxyhexoses from l ‐rhamnose demonstrates the value of synergy between biotechnology and chemistry. The readily available 2,3‐acetonide of rhamnonolactone allows inversion of configuration at C4 and/or C5 of rhamnose to give 6‐deoxy‐d ‐allose, 6‐deoxy‐d ‐gulose and 6‐deoxy‐l ‐talose. Highly crystalline 3,5‐benzylidene rhamnonolactone gives easy access to l ‐quinovose (6‐deoxy‐l ‐glucose), l ‐olivose and rhamnose analogue with C2 azido, amino and acetamido substituents. Electrophilic fluorination of rhamnal gives a mixture of 2‐deoxy‐2‐fluoro‐l ‐rhamnose and 2‐deoxy‐2‐fluoro‐l ‐quinovose. Biotechnology provides access to 6‐deoxy‐l ‐altrose and 1‐deoxy‐l ‐fructose

Positive Selection by Purified MHC Class II / Thymic Epithelial Cells In Vitro: Costimulatory Signals Mediated by B7 Are Not Involved

We have investigated the possibility that the costimulatory signals required for activation of mature T cells also play a role in providing differentiation signals for positive selection during T-cell development. We show that purified MHC Class II+ thymic epithelial cells are able to support positive selection in vitro but lack both the functional capacity to deliver costimulatory signals and expression of the costimulatory ligand B7. Our results suggest that the additional signals provided by costimulatory ligands are not required for TCR-mediated positive selection, although other ancillary signals provided by thymic epithelial cells may be involved

The British antibiotic and silver-impregnated catheters for ventriculoperitoneal shunts multi-centre randomised controlled trial (the BASICS trial): study protocol

BACKGROUND: Insertion of a ventriculoperitoneal shunt (VPS) for the treatment of hydrocephalus is one of the most common neurosurgical procedures in the UK, but failures caused by infection occur in approximately 8% of primary cases. VPS infection is associated with considerable morbidity and mortality and its management results in substantial cost to the health service. Antibiotic-impregnated (rifampicin and clindamycin) and silver-impregnated VPS have been developed to reduce infection rates. Whilst there is some evidence showing that such devices may lead to a reduction in VPS infection, there are no randomised controlled trials (RCTs) to support their routine use. METHODS/DESIGN: Overall, 1,200 patients will be recruited from 17 regional neurosurgical units in the UK and Ireland. Patients of any age undergoing insertion of their first VPS are eligible. Patients with previous indwelling VPS, active and on-going cerebrospinal fluid (CSF) or peritoneal infection, multiloculated hydrocephalus requiring multiple VPS or neuroendoscopy, and ventriculoatrial or ventriculopleural shunt planned will be excluded. Patients will be randomised 1:1:1 to either standard silicone (comparator), antibiotic-impregnated, or silver-impregnated VPS. The primary outcome measure is time to VPS infection. Secondary outcome measures include time to VPS failure of any cause, reason for VPS failure (infection, mechanical failure, or patient failure), types of bacterial VPS infection (organism type and antibiotic resistance), and incremental cost per VPS failure averted. DISCUSSION: The British antibiotic and silver-impregnated catheters for ventriculoperitoneal shunts multi-centre randomised controlled trial (the BASICS trial) is the first multi-centre RCT designed to determine whether antibiotic or silver-impregnated VPS reduce early shunt infection compared to standard silicone VPS. The results of this study will be used to inform current neurosurgical practice and may potentially benefit patients undergoing shunt surgery in the future. TRIAL REGISTRATION: International Standard Randomised Controlled Trial Number: ISRCTN49474281