Is There a Student Loan Debt Crisis at Private Colleges?

We’ve all seen media stories about an underemployed, recent college graduate who has $100,000 of student loan debt. Almost without fail the young person’s plight is offered as proof that there is a student loan “debt crisis.

Scintillation detectors constructed with an optimized 2x2 silicon photomultiplier array

Silicon photomultipliers (SiPMs) are a good alternative to photomultiplier tubes (PMTs) because their gain and quantum efficiency are comparable to PMTs. However, the largest single-chip SiPM is still less than 1~cm$^2$. In order to use SiPMs with scintillators that have reasonable sensitivity, it is necessary to use multiple SiPMs. In this work, scintillation detectors are constructed and tested with a custom 2x2 SiPM array. The layout of the SiPMs and the geometry of the scintillator were determined by performing Geant4 simulations. Cubic NaI, CsI, and CLYC with 18~mm sides have been tested. The output of the scintillation detectors are stabilized over the temperature range between --20 and 50~$^{\circ}$C by matching the gain of the SiPMs in the array. The energy resolution for these detectors has been measured as a function of temperature. Furthermore, neutron detection for the CLYC detector was studied in the same temperature range. Using pulse-shape discrimination, neutrons can be cleanly identified without contribution from $\gamma$-photons. As a result, these detectors are suitable for deploying in spectroscopic personal radiation detectors (SPRD).Comment: IEEE Nuclear Science Symposium Conference Record (2016

Growth of Finitely Generated Groups

Given a finitely generated group, we study various growth functions and growth series. We calculate growth functions for certain groups of polynomial and exponential growth, and study R. Grigorchuk's example of a group with intermediate growth. We examine relations between algebraic properties of a finitely generated group and the equivalence class of its growth functions

Essentially Normal Composition Operators on the Hardy Space

In this presentation, we will explore composition operators on the Hardy space. We will investigate what it means for such composition operators to be essentially normal. The following question will be answered in this presentation: Are there any composition operators on the Hardy space which are essentially normal but which are not compact

Feed Containing Novacq Improves Resilience of Black Tiger Shrimp, Penaeus Monodon, to Gill-associated Virus-induced Mortality

The ability of Novacq to improve resilience of black tiger shrimp, Penaeus monodon, to infection and mortality induced by gill-associated virus (GAV) was investigated. Over a 26-d period, shrimp were fed pellets with or without 10% Novacq. Following this, four replicate tanks, each containing 10 shrimp that had been fed either diet, were maintained as-is, injected with saline or injected with GAV inoculum (i.e., 40 shrimp for each of the six groups). For shrimp (n=20) in two of each group of four tanks, survival was monitored daily over 14d and a pleopod was sampled from each shrimp on Days 0 and 14. For the other two tanks, a pleopod was sampled from each shrimp on Days 0, 3, 7, 10, and 14 to track changes in GAV loads over time. Survival was significantly higher (P<0.05) from Day 7 onward among the group fed Novacq. GAV infection loads appeared to vary more between individuals in the Novacq diet cohort, but overall were not reduced significantly at any time points post-challenge compared to shrimp tested from the Control diet cohort.&nbsp

CFD Simulations of Supersonic Highly Swirling Flow Exiting a Turbine Vane Row Compared with Experimental Observations

Marshall Space Flight Center (MSFC) has been heavily involved in developing the J2-X engine. The Center has been testing a Work Horse Gas Generator (WHGG) to supply gas products to J2-X turbine components at realistic flight-like operating conditions. Three-dimensional time accurate CFD simulations and analytical fluid analysis have been performed to support WHGG tests at MSFC. The general purpose CFD program LOCI/Chem was utilized to simulate flow of products from the WHGG through a turbine manifold, a stationary row of turbine vanes, into a Can and orifice assembly used to control the back pressure at the turbine vane row and finally through an aspirator plate and flame bucket. Simulations showed that supersonic swirling flow downstream of the turbine imparted a much higher pressure on the Can wall than expected for a non-swirling flow. This result was verified by developing an analytical model that predicts wall pressure due to swirling flow. The CFD simulations predicted that the higher downstream pressure would cause the pressure drop across the nozzle row to be approximately half the value of the test objective. With CFD support, a redesign of the Can orifice and aspirator plate was performed. WHGG experimental results and observations compared well with pre-test and post-test CFD simulations. CFD simulations for both quasi-static and transient test conditions correctly predicted the pressure environment downstream of the turbine row and the behavior of the gas generator product plume as it exited the WHGG test article, impacted the flame bucket and interacted with the external environment

LISA Telescope Spacer Design Issues

The LISA mission observes gravitational waves by measuring the separations between freely floating proof masses located 5 million kilometers apart with an accuracy of - 10 picometers. The separations are measured interferometrically. The telescope is an afocal Cassegrain style design with a magnification of 80x. The entrance pupil has a 40 cm diameter and will either be centered on-axis or de-centered off-axis to avoid obscurations. Its two main purposes are to transform the small diameter beam used on the optical bench to a diffraction limited collimated beam to efficiently transfer the metrology laser between spacecraft, and to receive the incoming light from the far spacecraft. It transmits and receives simultaneously. The basic optical design and requirements are well understood for a conventional telescope design for imaging applications, but the LISA design is complicated by the additional requirement that the total optical path through the telescope must remain stable at the picometer level over the measurement band during the mission to meet the measurement accuracy. We describe the mechanical requirements for the telescope and the preliminary work that has been done to understand the materials and mechanical issues associated with the design of a passive metering structure to support the telescope and to maintain the spacing between the primary and secondary mirrors in the LISA on-orbit environment. This includes the requirements flowdown from the science goals, thermal modeling of the spacecraft and telescope to determine the expected temperature distribution, layout options for the telescope including an on- and off-axis design. Plans for fabrication and testing will be outlined

Twenty questions about design behavior for sustainability, report of the International Expert Panel on behavioral science for design

How behavioral scientists, engineers, and architects can work together to advance how we all understand and practice design—in order to enhance sustainability in the built environment, and beyond.https://www.nature.com/documents/design_behavior_for_sustainability.pdfPublished versio