Electrospinning of Cyclodextrin–Oligolactide Derivatives

The materials used for the preparation of electrospun mats exhibit a large variety. Among them, cyclodextrins (CDs) and their derivatives have received thorough attention. Herein, we focus on the preparation of electrospun fibers based on biodegradable cyclodextrin–oligolactide (CDLA) derivatives, which may be qualified as polymer-free cyclodextrin. CDLA was prepared by ring opening of L-lactide initiated by the β-cyclodextrin. A clear structural image of the high-purity CDLA product was proved by MALDI MS. Preparation of the electrospun mats was optimized by taking into consideration the electrospinning parameters such as applied voltage, needle-to-collector distance, flow rate, the concentration of cyclodextrin solutions, and solvent type. The obtained electrospun fibers were morphologically characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS). SEM allowed the optimization of the electrospinning process to obtain beadless fibers with submicronic diameters. Further analysis by TEM and SAXS revealed the inner structural features of the CDLA-based filaments. Our results showed that the high purity CDLA materials, structurally well-defined at the molecular level, are suitable for the preparation of electrospun mats by using dimethylformamide or a water/acetonitrile mixture as electrospinning solvents, similar to lower molecular weight commercial cyclodextrin derivatives

Electrospinning of Cyclodextrin–Oligolactide Derivatives

The materials used for the preparation of electrospun mats exhibit a large variety. Among them, cyclodextrins (CDs) and their derivatives have received thorough attention. Herein, we focus on the preparation of electrospun fibers based on biodegradable cyclodextrin–oligolactide (CDLA) derivatives, which may be qualified as polymer-free cyclodextrin. CDLA was prepared by ring opening of L-lactide initiated by the β-cyclodextrin. A clear structural image of the high-purity CDLA product was proved by MALDI MS. Preparation of the electrospun mats was optimized by taking into consideration the electrospinning parameters such as applied voltage, needle-to-collector distance, flow rate, the concentration of cyclodextrin solutions, and solvent type. The obtained electrospun fibers were morphologically characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS). SEM allowed the optimization of the electrospinning process to obtain beadless fibers with submicronic diameters. Further analysis by TEM and SAXS revealed the inner structural features of the CDLA-based filaments. Our results showed that the high purity CDLA materials, structurally well-defined at the molecular level, are suitable for the preparation of electrospun mats by using dimethylformamide or a water/acetonitrile mixture as electrospinning solvents, similar to lower molecular weight commercial cyclodextrin derivatives

Modification and photostabilization of LDPE film by photodecomposition of various diazo-compounds and methyl azidocarboxylate

Various diazo-compounds, 1,2,2,6,6-pentamethylpiperidin-4-yl diazoacetate (PMPDA), 2,2,6,6-tetramethylpiperidin-4-yl diazoacetate (TMPDA), methyl diazoacetate (MDA), 1,2,2,6,6-pentamethylpiperidin-4-yl 2-diazo-3-methyloxycarbonylpropionate (PMPMDS), 1,2,2,6,6pentamethylpiperidin-4-yl 2-diazo-4-methyloxycarbonylbutanoate (PMPMDP), and one azide, methyl azidocarboxylate (MAC), were successfully prepared and grafted on polyethylene films by UV light (lambda > 210 nm) activation. The treated films were characterised by FT-IR spectroscopy and contact angle measurements. Ab-initio quantum mechanical calculations allowed simulating the IR absorption spectra of the polymer grafted species. These last and the related grafting yields are discussed with reference to the diazo-compound structure and concentration. Up to 8.6 mol% of bonded groups (grafted groups/ethylene monomeric unit) were found without affecting the polymer molecular weight distribution, as shown by GPC analysis. All modified films bearing HAS groups showed very high photo-stability. (C) 2007 Elsevier Ltd. All rights reserved

Combined Therapy with Simvastatin- and Coenzyme-Q10-Loaded Nanoparticles Upregulates the Akt-eNOS Pathway in Experimental Metabolic Syndrome

In addition to their LDL-cholesterol-lowering effect, statins have pleiotropic beneficial effects on the cardiovascular system. However, long-term treatment with statins may be associated with serious side effects. With the aim to make statin therapy more effective, we studied the effects of simvastatin- and coenzyme-Q10-loaded polymeric nanoparticles on the lipid profile and nitric oxide (NO)/reactive oxygen species (ROS) balance in the heart and aorta of adult male obese Zucker rats. The rats were divided into an untreated group, a group treated with empty nanoparticles, and groups treated with simvastatin-, coenzyme Q10 (CoQ10)-, or a combination of simvastatin- and CoQ10-loaded nanoparticles (SIMV+CoQ10). After 6 weeks, the lipid profile in the plasma and the concentration of conjugated dienes in the liver were determined. Nitric oxide synthase (NOS) activity, Akt, endothelial NOS (eNOS), phosphorylated eNOS (p-eNOS), nicotinamide adenine dinucleotide phosphate (NADPH) oxidase, and nuclear factor kappaB (NF-kappaB) protein expressions were measured in the heart and aorta. All simvastatin, CoQ10, and SIMV+CoQ10 treatments decreased plasma LDL levels, but only the combined SIMV+CoQ10 treatment increased NOS activity and the expression of Akt, eNOS, and p-eNOS in both the heart and the aorta. Interestingly, NADPH oxidase in the heart and NF-kappaB protein expression in the aorta were decreased by all treatments, including nanoparticles alone. In conclusion, only combined therapy with SIMV- and CoQ10-loaded nanoparticles increased NOS activity and upregulated the Akt-eNOS pathway in obese Zucker rats, which may represent a promising tool for the treatment of cardiometabolic diseases

A polysulfobetaine hydrogel for immobilization of a glucose-binding protein

© The Royal Society of Chemistry 2016. A hydrogel based on sulfobetaine methacrylate monomer N-(methacryloyloxyethyl)-N,N-dimethyl-N-(3-sulfopropyl)ammonium betaine and N,N-bis(methacryloyloxyethyl)-N-methyl-N-(3-sulfopropyl)ammonium betaine used as a crosslinker was investigated as a potential material for biosensor applications. The glucose diffusion coefficient of 1.2 × 10 -10 m 2 s -1 was determined from the glucose release experiment. Inverse size-exclusion chromatography was performed to determine the molecular weight cut-off of the hydrogel to be 8 kDa with respect to pullulans that corresponds to a viscosity radius of 2.1 nm. The narrow pore-size distribution suggests that using the sulfobetaine crosslinker suppresses the composition drift and results in a homogeneous hydrogel network. Furthermore, a glucose biosensor construct comprising the periplasmic glucose-binding protein of Escherichia coli fused to cyan and yellow fluorescent proteins was effectively entrapped in the hydrogel exhibiting no leakage for at least 7 days. The glucose-binding protein showed stability of its secondary structure and sensitivity to glucose as assessed by circular dichroism and Förster (fluorescence) resonance energy transfer measurements under physiological conditions and a physiological range of glucose concentration, respectively.crosscheck: This document is CrossCheck deposited copyright_licence: The Royal Society of Chemistry has an exclusive publication licence for this journal history: Received 3 June 2016; Accepted 31 August 2016; Accepted Manuscript published 31 August 2016; Version of Record published 5 September 2016status: publishe