31 research outputs found
Lubrication of flanges of railway vehicles by ecological lubricants
Cílem této práce je provést rešeršní a analytické zhodnocení jednotlivých přístupů aplikovaných výrobci v oblasti mazání okolků kolejových vozidel ekologickými mazivy. Analýza je zaměřena na cyklické i kontinuální způsoby mazání jednotlivých typů centrálních mazacích systémů umisťovaných na kolejových vozidlech.The Aim of this thesis is to search and analytical evaluation of different approaches applied by producers in the field of wheel flanges lubrication of railway vehicles by means of ecological lubricants. The analysis focuses on the cyclical and continuous methods of lubrication of different types of central lubrication systems placed on the railway vehicles.
An analysis of motorcycle driving properties
Tato diplomová práce se zabývá metodami vyhodnocování jízdních vlastností vozidel se zaměřením na analytické posouzení stavu tlumících jednotek. Práce v rešeršní části popisuje některé dnešní analytické metody používané v praxi i v experimentálním měření. Analytické metody umožňuji při posuzování jízdních vlastností vozidel objektivní hodnocení. Hlavním cílem práce bylo vytvoření dvou nezávislých metodických postupů pro analýzu jízdních vlastností motocyklu s následným ověřením v praxi.This thesis deals with evaluating methods of vehicle driving characteristics with focus on dumping units analytical assessment. In theoretical part thesis describes some of today analytical methods used in practice and in experimental measurement. Analytical methods allow objective evaluation in the assessment of driving characteristics. Main objective of the thesis was to formulate two independent methodical procedures for analyzing motorbike driving characteristics with the subsequent practice verification.
The changes in fracture mechanism of the austenitic steel HR3C caused by isothermal laboratory ageing
Příspěvek je zaměřen na popis změn ve vysoce legované progresivní austenitické oceli,
celosvětově používané pro vysokoparametrickou (USC) energetiku, HR3C způsobené její
teplotní expozicí. Hodnotí dopad laboratorní teplotní expozice na změnu mechanických
vlastností. Dále je proveden rozbor lomových ploch za použití elektronové mikroskopie
z pohledu změny mechanismu porušování.Tento příspěvek vznikl na základě výsledků získaných za podpory Technologické agentury
České republiky v rámci projektu č. TA01010181, Ministerstva průmyslu a obchodu České
republiky v rámci projektu č. FR-TI3/458, Ministerstva školství tělovýchovy a sportu České
republiky v rámci projektu č. LO1207, a dále podpory grantové agentury Českého vysokého
učení technického v Praze v rámci projektu č. SGS 16/215/OHK2/3T/12.This paper deals with isothermal ageing induced changes in microstructure and its
influence into mechanical properties. Investigated material was high alloyed austenitic steel
HR3C in general worldwide applied for the ultra-supercritical (USC) powerplants.
Differences in the measured mechanical properties caused by an isothermal ageing are
evaluated. The electron microscopy fracture surfaces analysis focused on presence of the
brittle particles is listed
The cladding tubes for the energetic boiler critical parths application
Příspěvek uvádí do problému aplikace plátovaných trubek pro specifická degradační
prostředí. Uvádí možnosti rozšíření použití plátovaných trubek pro aplikaci v energetice.
V případě energetických bloků je nutné brát v úvahu teplotní zatížení při provozu, které může
způsobit vážné problémy na plátovaném rozhraní. Příspěvek uvádí výpočtové řešení na
plátovaném rozhraní nosného a ochranného materiálu.Introduction of this paper briefly introduce into application of the cladding tubes under
specific degradation conditions. One of the specific applications of cladding tubes can be for
power boilers, respectively for heat exposed boiler parts. It is necessary keep in mind heat
exposition in this application. Elevated temperature can cause serious problems for cladding
surface. This paper present results of the cladding surface numerical modeling
Mesenchymal Stem Cells in Bone Tissue Regeneration and Application to Bone Healing
This synoptic study gives a concise overview of current knowledge of bone healing, the role of mesenchymal stem cells in bone tissue regeneration and contemporary possibilities of supporting regeneration of damaged bone. Attention of research concerning the healing of fractures with extensive loss of bone tissue following trauma, the treatment of belatedly healing or non-healing fractures or the healing of segmental bone defects following tumour resection, is focused on development of three-dimensional scaffolds planted with mesenchymal stem cells that might be used for reconstruction of such large bone lesions. Presented are possibilities of transplantation of mesenchymal stem cells combined with biomaterials into bone defects, including the results of our own experimental studies dealing with the use of stem cells in the treatment of damaged tissues of the musculoskeletal system in animal models
Mechanical properties and microstructures of narrow gap orbital welded P91 and P92 steels after long-term laboratory ageing at elevated temperatures
Příspěvek se zabývá hodnocením mechanických a strukturních vlastností homogenních
a heterogenních orbitálních svarových spojů do úzkého úkosu z martenzitických ocelí P91
a P92 po dlouhodobém laboratorním degradačním žíhání za zvýšených teplot až 700 °C po
dobu až 30 000 hodin. Výstupem tohoto hodnocení jsou kinetické závislosti změn
strukturních a mechanických vlastností během teplotního namáhání.This paper deals with an evaluation of mechanical properties and microstructures of similar
and dissimilar narrow gap orbital welds of martensitic P91 and P92 steels after long-term
laboratory ageing at elevated temperatures (up to 700 °C for up to 30 000 hours). As
a conclusion of this assessment, the kinetic dependencies of structure and mechanical
properties changes during long-term exposure at high temperatures are presented
The analysis of the corrective Ni-Cr based sonic coatings
Ve spolupráci s IGS Europe jsou vyvíjeny nástřikové systémy určené k prodlužování životnosti teplosměnných ploch a varných stěn kotlů energetických zařízení a spaloven. Článek se
zabývá analýzou aplikovaných metalických nástřiků na bázi Ni-Cr nanášených metodou sonického obloukového stříkání. Analýzy vlastností a následná porovnání byla provedena na laboratorně exponovaných vzorcích a na vzorcích provozně degradovaných. Pro účel degradace byly
vzorky umístěny ve spalovně komunálního odpadu a spalovně biomasy.Tento příspěvek vznikl na základě výsledků získaných za podpory Technologické agentury
České republiky v rámci probíhajícího projektu TH04020487.The new sonic coating systems are being developed in cooperation with IGS Europe. The
application of these coatings is meant to serve as a repair to extend the operating lifetime of the
heat exchangers and boiler walls in the incineration plants and other energy-producing facilities.
This paper shows an analysis of the mentioned arc deposited sonic Ni-Cr based metallic coatings. Testing and the following comparison were performed on two sets of samples. One set
was thermally exposed under controlled laboratory conditions and the second set was placed
directly in the flue gas stream in the waste and biomass incineration plant
Healing of Large Segmental Bone Defect after Implantation of Autogenous Cancellous Bone Graft in Comparison to Hydroxyapatite and 0.5% Collagen Scaffold Combined with Mesenchymal Stem Cells
Some aspects of the project Language integration of foreigners in vocabulary
Results of a sociolingusitic research