1,270 research outputs found

    A TABU SEARCH FOR MULTIPLE MULTI-LEVEL REDUNDANCY ALLOCATION PROBLEM IN SERIES-PARALLEL SYSTEMS

    Get PDF
    The traditional RAP (Redundancy Allocation Problem) is to consider only the component redundancy at the lowest-level. A system can be functionally decomposed into system, module, and component levels. Modular redundancy can be more effective than component redundancy at the lowest-level. We consider a MMRAP (Multiple Multi-level Redundancy Allocation Problem) in which all available items for redundancy (system, module, and component) can be simultaneously chosen. A tabu search of memory-based mechanisms that balances intensification with diversification via the short-term and long-term memory is proposed for its solution. To the best of our knowledge, this is the first attempt to use a TS for MMRAP. Our algorithm is compared with the previous genetic algorithm for MMRAP on the new composed test problems as well as the benchmark problems from the literature. Computational results show that the tabu search outstandingly outperforms the genetic algorithm for all test problems

    I-129 Waste form Using Bi-Zn-P-Oxide Glass

    Get PDF
    AbstractI-129 is a problematic nuclide generated from the recycling of spent fuel by pyroprocess. Gaseous form of radiogenic iodine is trapped by using silver exchanged zeolite (AgX) at Korea Atomic Energy Research Institute (KAERI). We developed the low melting temperature glass system based on Bi2O3-P2O5 composition. Various additives were added to modify glass properties. We found that ingots containing AgI are formed with ZnO, CaCO3, MgO, and Na2CO3 at around 600°C. Analysis of microstructure and chemical durability revealed that AgI was encapsulated by glass matrix and formation of AgI compound is meaningful in fabricating iodine waste form

    Out-of-Plane Strengthening of Unreinforced Masonry Walls by Glass Fiber-Reinforced Polyurea

    Get PDF
    Fiber-reinforced polymer reinforcement or polyurea reinforcement techniques are applied to strengthen unreinforced masonry walls (UMWs). The purpose of this experimental study is to verify the out-of-plane reinforcing effect of sprayed glass fiber-reinforced polyurea (GFRPU), which is a composite elastomer made of polyurea and milled glass fibers on UMW. The out-of-plane strengths and ductile behaviors based on various coating shapes are compared in this study. An empirical formula to describe the degree of reinforcement on the out-of-plane strength of the UMW is derived based on the experimental results. It is observed that the peak load-carrying capacity, ductility, and energy absorption capacity gradually improve with an increase in the strengthening degree or area. Compared with the existing masonry wall reinforcement method, the GFRPU technique is a construction method that can help improve the safety performance along with ease of construction and economic efficiency. Doi: 10.28991/CEJ-2022-08-01-011 Full Text: PD

    In-Plane Strengthening of Unreinforced Masonry Walls by Glass Fiber-Reinforced Polyurea

    Get PDF
    Strengthening techniques have been employed in Korea to unreinforced masonry walls (UMWs) for several years to protect them from damage caused by the intermittent occurrence of earthquakes. Polyurea, which has a high tensile strength and elongation rate, can be utilized as a strengthening material to enhance the in-plane strength and ductility of UMWs. Glass fiber-reinforced polyurea (GFRPU) is a composite elastomer manufactured by progressively adding milled glass fiber to polyurea. The purpose of this study is to investigate the enhancement of the in-plane strength and ductility of UMWs using GFRPU, depending on the shape of the GFRPU coating on the wall. Four masonry wall specimens are tested with test variables of the number of strengthening sides and coating shapes. It is illustrated that the GFRPU reinforcement of masonry wall leads to enhanced load-carrying capacity, ductility, and energy absorption. An empirical formula to represent the degree of strengthening effected by GFRPU is proposed in this study. Doi: 10.28991/cej-2021-03091782 Full Text: PD

    Clinical characteristics of 2009 pandemic influenza A (H1N1) infection in children and the performance of rapid antigen test

    Get PDF
    PurposeIn autumn 2009, the swine-origin influenza A (H1N1) virus spread throughout South Korea. The aims of this study were to determine the clinical characteristics of children infected by the 2009 H1N1 influenza A virus, and to compare the rapid antigen and real-time polymerase chain reaction (PCR) tests.MethodsWe conducted a retrospective review of patients ≥18 years of age who presented to Soonchunhyang University Hospital in Seoul with respiratory symptoms, including fever, between September 2009 and January 2010. A real-time PCR test was used to definitively diagnose 2009 H1N1 influenza A infection. Medical records of confirmed cases were reviewed for sex, age, and the time of infection. The decision to perform rapid antigen testing was not influenced by clinical conditions, but by individual factors such as economic conditions. Its sensitivity and specificity were evaluated compared to real-time PCR test results.ResultsIn total, 934 patients tested positive for H1N1 by real-time PCR. The highest number of patients (48.9%) was diagnosed in November. Most patients (48.2%) were aged between 6 and 10 years. Compared with the H1N1 real-time PCR test results, the rapid antigen test showed 22% sensitivity and 83% specificity. Seventy-eight patients were hospitalized for H1N1 influenza A virus infection, and fever was the most common symptom (97.4%).ConclusionFor diagnosis of 2009 H1N1 influenza A virus infection, the rapid antigen test was inferior to the real-time PCR test in both sensitivity and specificity. This outcome suggests that the rapid antigen test is inappropriate for screening

    Fabrication of AlGaN/GaN Fin-Type HEMT Using a Novel T-Gate Process for Improved Radio-Frequency Performance

    Get PDF
    To increase the radio-frequency (RF) performance of AlGaN/GaN-based fin-type high electron mobility transistors (HEMTs), a novel T-gate process was developed and applied to fabricate a device with high RF performance. In a single lithography process, the applied T-gate process shows a technique for forming a T-gate using the reactivity difference of several photoresists. The fabricated device has a steep fin width (W-fin) of 130 nm, a fin height (H-fin) of 250 nm, and a gate length (L-G) of 190 nm. The device exhibits a low leakage current (I-off) of 6.6 x 10(-10) A/mm and a high I-on/I-off current ratio of 4.7 x 10(8). Moreover, the fabricated device achieved a high cut-off frequency (f(T)) of 9.7 GHz and a very high maximum oscillation frequency (f(max)) of 27.8 GHz. The f(max) value of the proposed device is 138% higher than that of GaN-based fin-type HEMTs without T-gate.1

    Black rice (Oryza sativa L.) extract attenuates hepatic steatosis in C57BL/6 J mice fed a high-fat diet via fatty acid oxidation

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Two major risk factors for the onset of fatty liver disease are excessive alcohol intake and obesity, the latter being associated with non-alcoholic fatty liver disease (NAFLD). The aim of this study was to examine the effects of black rice extract (BRE) on hepatic steatosis and insulin resistance in high-fat diet-fed mice, providing a model of NAFLD.</p> <p>Methods</p> <p>Twenty-four mice were randomly divided into three groups (n = 8 in each group): normal fat diet (ND), high fat diet (HF), and high fat diet supplemented with 1% (w/w) BRE (HF +1% BRE). The experimental diets were fed for seven weeks.</p> <p>Results</p> <p>A HF induced hepatic steatosis with significant increases in the serum levels of free fatty acids (FFAs), triglyceride (TG), total cholesterol (TC), and insulin. By contrast, supplementary BRE (10 g/kg of diet) included in the HF alleviated hepatic steatosis and significantly decreased serum TG and TC levels (p < 0.01 for both). Dietary BRE also increased expression of fatty acid metabolism-related genes, including carnitine palmitoyltransferase (CPT1A), acyl-CoA oxidase (ACO), cytochrome P450 (CYP4A10), and peroxisome proliferator activated receptor (PPAR)-α (p < 0.05 for all).</p> <p>Conclusions</p> <p>Dietary BRE supplementation improved serum lipid profiles and significantly enhanced mRNA expression levels of fatty acid metabolism-related genes, primarily via β-oxidation and ω-oxidation in the liver. Taken together, these findings suggest that a BRE-supplemented diet could be useful in reducing the risks of hepatic steatosis and related disorders, including hyperlipidemia and hyperglycemia.</p

    Silicon carbide-free graphene growth on silicon for lithium-ion battery with high volumetric energy density

    Get PDF
    Silicon is receiving discernable attention as an active material for next generation lithium-ion battery anodes because of its unparalleled gravimetric capacity. However, the large volume change of silicon over charge-discharge cycles weakens its competitiveness in the volumetric energy density and cycle life. Here we report direct graphene growth over silicon nanoparticles without silicon carbide formation. The graphene layers anchored onto the silicon surface accommodate the volume expansion of silicon via a sliding process between adjacent graphene layers. When paired with a commercial lithium cobalt oxide cathode, the silicon carbide-free graphene coating allows the full cell to reach volumetric energy densities of 972 and 700 Whl(-1) at first and 200th cycle, respectively, 1.8 and 1.5 times higher than those of current commercial lithium-ion batteries. This observation suggests that two-dimensional layered structure of graphene and its silicon carbide-free integration with silicon can serve as a prototype in advancing silicon anodes to commercially viable technology.

    Field-induced spin level crossings within a quasi-XY antiferromagnetic state in Ba2_{2}FeSi2_{2}O7_{7}

    Full text link
    We present a high-field study of the strongly anisotropic easy-plane square lattice SS = 2 quantum magnet Ba2_{2}FeSi2_{2}O7_{7}. This compound is a rare high-spin antiferromagnetic system with very strong easy-plane anisotropy, such that the interplay between spin level crossings and antiferromagnetic order can be studied. We observe a magnetic field-induced spin level crossing occurring within an ordered state. This spin level crossing appears to preserve the magnetic symmetry while producing a non-monotonic dependence the order parameter magnitude. The resulting temperature-magnetic field phase diagram exhibits two dome-shaped regions of magnetic order overlapping around 30 T. The ground state of the lower-field dome is predominantly a linear combination of Sz=0| S^{z} = 0 \rangle and Sz=1 |S^{z} = 1 \rangle states, while the ground state of the higher-field dome can be approximated by a linear combination of Sz=1| S^{z} = 1 \rangle and Sz=2 | S^{z} = 2\rangle states. At 30 T, where the spin levels cross, the magnetization exhibits a slanted plateau, {\color {black}the magnetocaloric effect shows a broad hump, and the electric polarization shows a weak slope change}. We determined the detailed magnetic phase boundaries and the spin level crossings using measurements of magnetization, electric polarization, and the magnetocaloric effect in pulsed magnetic fields to 60 T. We calculate these properties using a mean field theory based on direct products of SU(5) coherent states and find good agreement. Finally, we measure and calculate the magnetically-induced electric polarization that reflects magnetic ordering and spin level crossings. This multiferroic behavior provides another avenue for detecting phase boundaries and symmetry changes.Comment: 9 pages, 5 figure
    corecore