Role of zakat in poverty alleviation and economic development – special field study of Maruthamunai

This paper presents the role of Zakat in poverty alleviation and economic development in the community as well as in the nation. The researcher has given a special attention and field work in Maruthamunai, a village in Kalmunai Municipal Counicil of Amparai District. A variety of reforms and new ideas in the management and institutions are responsible for collecting and distributing of zakat. Zakat is a specific property with certain conditions prescribed for certain people and given to people or certain people (recipients) as well. The main aim of zakat has two dimensions i.e., spirituality (individually) and social economy to empowerment and enhance the status of the ummah (community). ( Mutiara Dwi Sari….2013) Sri Lanka as a country with minority Muslim population has a challengeable in collecting and distributing of zakat according to the state rule. If zakat is managed properly, it will certainly have positive effect on the wellbeing of Sri Lankan poor Muslims.Maruthamunai which researcher has focused specially is a village with 100% of Muslim population. The Zakat management has been practiced as an institutional level for last twenty years at this village with the coordination of Mosques Federation and some Dawah movements. However, Lack of coordination between all institutions of zakat management has resulted in the achievement of zakat collection and distribution does not optimum. The research will bring the reason of this backward of Zakat management into the light

Stress Indices for Non-Radial Branch Connections for Piping

AbstractProcedure for determining the stress indices for non radial branch connections is discussed. A typical non radial branch connection, commonly used in the piping system of FRFCF is modeled and analyzed using CAST-3M for calculation various stress indices for the connection. B2 Stress indices for the branch connection for in plane bending and out of plane bending is arrived at based on nonlinear finite element analysis and limit load approach. K2 factor is determined using Peterson's curve, based on the curvature at the junction of run pipe and branch connection. Stress index C2 and the stress intensification factor i are determined by employing the relations of these factors with other stress indices

Specimen Level and Component Level Simulations of Fatigue Crack Growth Behavior under Cyclic Bending

Power plant piping system subjected to many cyclic loading conditions leads to fatigue loading and thereby crack initiation in the piping system. Demonstrating Leak-Before-Break (LBB) in the design stage itself plays an important role in ensuring the safety of the Sodium-cooled Fast Reactors (SFR) system. The design code guidelines as per RCC MRx A16 in LBB demonstration is conservative in nature. Conducting experiments for each size of the piping systems are expensive and time-consuming. In this paper present, the efforts taken to develop reliable numerical methods to demonstrate Fatigue Crack Growth (FCG). The geometries selected for the FCG analysis include both specimen level as well as full-scale component. The results show that KI estimate for the plate specimen increased with the increase of ‘a/t’ ratio up to 0.6 and then decreases, whereas, in case of the pipe bend, it reduced beyond the ‘a/t’ ratio of 0.4. This early reduction is due to the influence of global compressive stress present ahead of the crack growth. Thus, component level FCG simulation is essential for the accurate demonstration of LBB. FCG simulation has numerically demonstrated with better engineering accuracy for both specimen level as well as component level geometrie

Evaluation of banana (Musa sp.) flowers of selected varieties for their antioxidative and anti-hyperglycemic potentials

Consumption of banana flower as a vegetable is popular among many countries in Southeast Asia. In this study, banana flowers of six different Malaysian cultivars namely, pisang Abu (Musa balbisiana cv P. Abu), pisang Berangan (Musa acuminata cv P. Berangan), pisang Nipah (Musa balbisiana cv P. Nipah), pisang Susu (Musa acuminata cv P. Susu), pisang Mas (Musa acuminate cv P. Mas) and pisang Rastali (Musa paradisiaca cv P. Rastali) were investigated for their antioxidant and anti-hyperglyemic properties. The total poly phenolic content and antioxidant activities, the α-amylase and α-glucosidase inhibitory potentials of the banana flower extracts were studied in vitro using relevant assays. Among the six cultivars, cultivar Susu was found to have the highest phenolic content (80.13 ± 4.64 mg of GAE/g of extract) and displayed the highest ABTS+ and DPPH radical scavenging activities (24.73 ± 0.04 and 25.10 ± 0.15 μmole of Trolox equivalent/g of extract). The anti-amylase and antiglucosidase activity of the banana flowers extracts were in the range of 47.31-62.58% and 74.98-91.62%, respectively. All banana flower extracts inhibited the activity of α-glucosidase better than α-amylase at the concentration of 200 μg/ml. This study concluded that the extracts of Malaysian banana flowers were potent sources of natural antioxidants, which can be used as postprandial hyperglycemia regulators

Composition and thermal analysis of lipids from pre-fried chicken nuggets.

Composition and thermal profiles of the endogenous lipids of ten commercial chicken nuggets brands (NPO, ACO, AFO, APO, ASO, AMO, ARO, JOD, SMO, and SOD) were compared with those of the lipids of chicken nuggets pre-fried in lard (ALD) and palm olein (AOO) to determine the type of oil used for pre-frying of the product. The stearic acid content of the commercial brands were similar to that of the sample pre-fried in palm olein, but significantly (p < 0.05) lower than that of the sample pre-fried in lard. The triacylglycerol (TAG) profiles of the commercial brands were similar to that of the sample pre-fried in palm olein, but distinctly different from the sample pre-fried in lard according to the dissimilarities in the contents of TAG molecules namely, PLL, POS, and PPO. Based on thermal analysis, the commercial brands of chicken nuggets could be divided into three distinguishable subgroups namely, Group-A: NPO; Group-B: ACO, AFO, APO, ASO; Group-C: AMO, ARO, JOD, SMO, SOD. While brands under group-B showed close similarity to AOO, none show any similarity to sample ALD. As any of the samples did not possess characteristics of the sample pre-fried in lard, the commercial brands of chicken nuggets of this study are recommendable for consumers whose religious restriction prevents the use of lard in food

Physicochemical properties and thermal behavior of binary blends of Madhuca longifolia seed fat and palm oil as a lard substitute

Fat extracted from pork is prohibited under halal and kosher food regulations. A study was carried out on Madhuca longifolia seed fat and palm oil to compare their physicochemical, solidification and melting characteristics to formulate halal alternative lipid substitutes. Various blends of Madhuca longifolia (ML) and palm oil (PO) was formulated in order to become similar to lard (LD). A total of three binary blends were prepared: ML:PO (97:3; w/w), ML:PO (95:5), ML:PO (93:7), and identified by the mass ratio of ML to PO. The fat blends were compared with LD in terms of the fatty acid and triacylglycerol compositions using gas chromatography and high performance liquid chromatography, respectively. In addition, the fat blends also being studied for thermal properties using differential scanning calorimetry and solid fat content using p-nuclear magnetic resonance. Although there were considerable differences between LD and the fat blends with regard to fatty acid and triacylglycerol compositions, some similarities were seen regarding to thermal properties and solid fat content profiles. The blend of ML:PO (97:3) displayed closer similarity to LD with respect to melting transition at -3.59°C and its solid fat content profile showed the least difference to that of LD throughout the temperature range measured

ICONE17-75851 DESIGN AND DEVELOPMENT OF DIVERSE SAFETY ROD AND ITS DRIVE MECHANISM FOR PFBR

ABSTRACT Prototype Fast Breeder Reactor (PFBR) is U-PuO 2 fuelled sodium cooled Pool type Fast Reactor and it is currently under advanced stage of construction at Kalpakkam, India. The Fast Breeder Test Reactor (FBTR) which is the only fast reactor currently operational in India is having only one shutdown system. However the IAEA and Atomic Energy Regulatory Board (AERB) Guide Lines call for two independent fast acting diverse shutdown systems for the present generation reactors. Hence PFBR is equipped with two independent, fast acting and diverse shutdown systems. A shutdown system comprises of sensors, logic circuits, drive mechanisms and neutron absorbing rods. The two shutdown systems of PFBR are capable of bringing down the reactor to cold shutdown state independent of the other. The absorber rods of the second shutdown system of PFBR are called as Diverse Safety rods (DSR) and their drive mechanisms are called as Diverse Safety Rod Drive Mechanisms (DSRDM). DSR are normally parked above active core by DSRDM. On receiving scram signal, Electromagnet of DSRDM is de-energised and it facilitates fast shutdown of the reactor by dropping the DSR in to the active core. This paper presents chronological design and development of the prototype DSR and DSRDM starting from the design specifications. Salient design specifications for both DSRDM and DSR are listed initially. The conceptual &amp; detailed design features are explained with the help of figures. Various important design options considered in the initial design stage, choice of final design along with brief explanation for the particular choice are also given for some of the important components. Details on material of construction are given at appropriate places. Details on various analysis such as large displacement analysis for buckling, bending analysis for determining reactive forces and friction in the mechanism, thermal stress analysis of electromagnet during scram, flow induced vibration analysis of DSRDM and DSR and hydraulic analysis for estimating the pressure drop and drop time of DSR are also given. Test plans for design verification, manufacturing and shop testing experience of prototype systems, and criteria for endurance testing in sodium for qualification of DSRDM and DSR for operation in reactor are also briefed

Coconut.

Coconut palm (Cocos nucifera L) is an important perennial crop distributed in most parts of the Asia and the pacific region, and some parts of America. Coconut exists in two major classes, which are typically recognized on the basis of stature: Tall and Dwarf. Cross-breeding between Tall and Dwarf types of coconut has led to the generation of many hybrid coconut varieties. Hybrids with high yield potential and attractive agronomical traits are grown commercially for harvesting either tender nuts or mature nuts. Tender nuts with the maturity stage of 7-8 months are freshly used for drinking or preserved under cold storage for future uses. Mature coconuts are mainly used for obtaining kernel, which is a base material for coconut milk as well as a host of other products. As coconut kernel is composed of lipids, proteins, carbohydrates, minerals, and vitamins, it could be a wholesome food, which can supplement the daily dietary requirement of people

Environmental management and the “soft side” of organisations: Discovering the most relevant behavioural factors in green supply chains

Anchored in the resource‐based view theory, the objective of this research is to empirically analyse the behavioural factors affecting the green supply chain management (GCSM) performance in a fast‐growing emerging economy by taking an empirical data set of 101 responses from personnel in the mining sector. Behavioural factors in green supply chains are still a critical challenge—not yet a well‐explored academic subject—when the focus is on the mining industry of emerging economies like India; the lack of studies in this field could be a factor preventing the Indian mining industry becoming more green. In terms of methodology, original survey data were processed through AMOS 4.0, adopted for assessing the causal connection among the six constructs, that is, top management support, teamwork, workplace culture, resistance to change, green innovation, and green motivation. We further explore the input from the human side of GCSM by highlighting that top management support and green motivation are the most crucial behavioural factors that influence GCSM in the Indian mining sector. The study will be helpful for mining companies because it will enable them to identify the areas that require their attention for enhancing GCSM performance related to behavioural aspects