8 research outputs found
Simulation of vortex tube using natural gas as working fluid with application in city gas stations
The work has been done on a 3D model of vortex tube and
the governing equations have been solved using ANSYS–
FLUENTTM software. Simulations were performed using density
based solver and k-ε turbulence model. After validating some
results of present study with available data, the effects of
geometrical parameters and air/natural gas flow in a vortex tube
with 6 and 2 tangential nozzles was examined. The performance
of vortex tube with 6 nozzles was better when compared with 2
nozzles which is in satisfactory agreement with previous
experiments, so we only show the results for the 6 nozzles vortex
tube. There is a little difference between air and natural gas as a
working fluid. We found that the temperature difference between
hot and cold ends for air flow was little more than natural gas.
Based on the results obtained in this work it is concluded that
vortex process based on pressurized natural gas can be used in
C.G.S as a heat exchanger for high efficiency operation and
energy saving purposes.Papers presented to the 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Costa de Sol, Spain on 11-13 July 2016
Constructing a Dual-Function Surface by Microcasting and Nanospraying for Efficient Drag Reduction and Potential Antifouling Capabilities
Implications of inertia for hydroelastic instability of Herschel-Bulkley fluids in plane poiseuille flow
This study investigates the effects of inertia on the hydroelastic instability of a pressure-
-driven Herschel-Bulkley fluid passing through a two-dimensional channel lined with a polymeric
coating. The no-viscous hyperelastic polymeric coating is assumed to follow the
two-constant Mooney-Rivlin model. In this work, analytical basic solutions are determined
for both the polymeric gel and the fluid at very low Reynolds numbers. Next, the basic solutions
are subjected to infinitesimally-small, normal-mode perturbations. After eliminating
the nonlinear terms, two 4-th order differential equations are obtained. The equations with
appropriate boundary conditions are then numerically solved using the shooting method.
The results of the solution show that the inertia terms in the perturbed equations destabilize
the pressure-driven Herschel-Bulkley fluid flow. The investigation reveals that the elastic
parameter has a stabilizing effect on the flow. Also, based on the obtained results, the yield
stress, depending on the power-law index, has a stabilizing or destabilizing effect on the
flow. Since in this work the inertia terms are included in the pertinent governing equations,
therefore, the results of this study are much more realistic and reliable than previous works
in which inertia terms were absent. In addition, unlike the previous works, the present study
considers both the shear-thinning and shear-thickening types of fluids. Hence, the results of
this work embrace all the fluids which obey the Herschel-Bulkley model
Effects of Carbon Nano-additives on Characteristics of TiC Ceramics Prepared by Field-assisted Sintering
Five carbonaceous nano-additives (graphite, graphene, carbon black, carbon nanotubes, and diamond) had different impacts on the sinterability, microstructural evolution, and properties of titanium carbide. In this research, the sintering by spark plasma was employed to produce the monolithic TiC and carbon-doped ceramics under the sintering parameters of 1900 ºC, 10 min, 40 MPa. The carbon black additive had the best performance in densifying the TiC, thanks to its fine particle size, as well as its high chemical reactivity with TiO2 surface oxide. By contrast, the incorporation of nano-diamonds resulted in a considerable decline in the relative density of TiC owing to the graphitization phenomenon, together with the gas production at high temperatures. Although carbon precipitation from the TiC matrix occurred in all samples, some of the added carbonaceous phases promoted this phenomenon, while the others hindered it to some extent. Amongst the introduced additives, carbon black had the most contribution to grain refining, so that a roughly halved average grain size was attained in comparison with the undoped specimen. The highest values of hardness (3233 HV0.1 kg), thermal conductivity (25.1 W/mK), and flexural strength (658 MPa) secured for the ceramic incorporated by 5 wt% nano carbon black