346 research outputs found
Environmental control on the end of the Dolomia Principale/Hauptdolomit depositional system in the central Alps: Coupling sea-level and climate changes
The Norian in the Western Tethys is characterised by the deposition of early-dolomitised inner platform facies (Dolomia Principale/Hauptdolomit, DP/HD), bordered on the landward side by terrigenous coastal deposits (Keuper) and on the seaward side by calcareous backreef and reefal facies (Dachstein Limestone) passing basinward to open-sea sediments (Hallstatt facies). The inner carbonate platform is locally (Lombardy Basin, Carnic Alps, Central Austroalpine) dissected by normal faults leading to the development of intraplatform troughs.
Close to the Norian-Rhaetian boundary, sedimentation records an abrupt environmental change both on platform top and basins all over the Western Tethys (e.g. Western Carpathians, Transdanubian Range, Alps, Central Apennine). The top of the Dolomia Principale locally emerged, reflecting a major eustatic sea-level fall. Emersion is recorded in favourable settings by the development of polycyclic paleosols up to 30 m thick. In the Norian intraplatform basins, the succession is capped by 4 to 8 m of thin-bedded, fine-grained limestones yielding abundant remnants of fishes and terrestrial reptiles. Fossil concentration as well as sedimentological features is indicative of reduced sedimentation rates due to decreased carbonate production, induced by the emersion of the platform top. The sea-level fall was followed by deposition of mixed fine-grained siliciclastic-carbonate successions (e.g. Riva di Solto Shale, Kossen beds, "Rhaetavicula contorta beds", Fatra Formation).
Stratigraphic evidence indicates a dry climate in the Western Tethys during the Norian, as indicated by the presence of evaporites (Burano, Apennine) and arid to semi-arid coastal to playa settings (Upper Keuper, Germany). In contrast, the basal layers of the basinal shales show evidence of wet climate.
The end of the Norian depositional system records two different phenomena: (1) an important sea-level fall was responsible for the emersion of the platform top and deposition of a condensed horizon in the basins: and (2) transition from dry to humid climate. The observed evolution is explained with a global cooling which caused the rapid sea-level fall responsible for the abrupt end of the DP/HD depositional system and the shift of the boundary between arid and temperate climate belts, which modified the distribution and amount of rainfall, triggering the deposition of shales along the Western Tethys margin
Large-scale progradation, demise and rebirth of a high-relief carbonate platform (Triassic, Lombardy Southern Alps, Italy)
The Upper Anisian to Early Carnian succession of the Middle Val Brembana-Pegherolo Massif (Central Southern Alps of Italy) records a complete depositional cycle from platform inception to growth, demise and rebirth. The depositional architecture of this system reflects different evolutionary stages: an inception stage which postdates a previous drowning of an Anisian carbonate platform with progradation of the carbonate platform from the nucleation areas, an aggradational stage with increasing water depth in the basins, a progradational stage where steep slopes composed of margin-derived breccias develop and a final crisis corresponding to the subaerial exposure of the platform top, followed by the deposition of shales in the basin before the rebirth of a different type of carbonate factory. The record of this evolution reflects the effects of the change in accommodation space (interplay of subsidence and eustacy), which controls the type and storage sites of the sediments produced by the carbonate factory. The effects of the changes in accommodation space are recorded in the shallow water platform as well as in the intraplatform basins, where the sediments, delivered at different rates from the platform top are stored. As a consequence, the aggradational stage corresponds to reduced sedimentation in the basins (i.e. sediments are stored on the platform top) whereas during progradation resedimented limestones are more common in the basin. Subaerial exposure rapidly halted the carbonate production on the platform top, while a major input of shales (probably reflecting a climate change and/or lowering of the base level) is recorded in the basin, where shales onlap the slope of the previous carbonate system. The rebirth of the carbonate factory after subaerial exposure of the platform top is characterized by a different composition of the carbonate factory, probably reflecting changes of the environmental conditions. The step-by-step recording of the evolution of the carbonate system represents a unique opportunity to record a seismic-scale complete evolutionary cycle of a carbonate system in its different sub-environments, from the platform top to the basin
THE MIDDLE TRIASSIC OF THE BREMBANA VALLEY: PRELIMINARY STUDY OF THE ESINO PLATFORM (Bergamasc Alps)
The stratigraphy and paleogeography of the ladinian Esino Limestone outcropping in Valle Brembana-Valle Parina, have been integrated with the biostratigraphic analysis of cephalopod fauna. A complex internal structure of the upper anisian-ladinian Esino carbonate platform has been identified. Six different lithozones have been recognized, they record the stratigraphic-paleogeographic evolution of the Esino Limestone. This carbonate platform developed through three stages: 1) construction of a lower edifice (Late Anisian-? Early Ladinian) representing the first phase of carbonate piatform diffusion on structural highs, which were already the site of carbonate deposition during the Middle Anisian (peritidal dolomites of the Angolo Limestone); 2) buildup of the carbonate complex (main edifice). In this second phase (Early Ladinian-Late Ladinian p.p.) the most important one, the platform growth took place by prevalent aggradation; 3) development of the upper edifice and progradation of the piatform in the Late Ladinian. In this third phase, inner plarform facies with diagenetic caps at the top of peritidal cycles are common. The buildup developed in the second phase yields bioclastic packstones with ammonoids, gastropods, echinoderms, and bivalves clustered within lithozone 4 and in the proximity of the southern margin of the platform in Val Parina. Studies in progress of ammonoids and gastropods allowed for the recognition of different fossil assemblages which date from Early Ladinian to Late Ladinian. A few problematic ammonoid assemblage of probably Early Ladinian age, has been found in a stratigraphic level above the base of the Esino Limestone
The influence of petrography, mineralogy and chemistry on burnability and reactivity of quicklime produced in Twin Shaft Regenerative (TSR) kilns from Neoarchean limestone (Transvaal Supergroup, South Africa)
This study evaluates the influence of chemical, mineralogical and petrographic features of the Neoarchean limestone from the Ouplaas Mine (Griqualand West, South Africa) on its burnability and quicklime reactivity, considering the main use as raw material for high-grade lime production in twin shaft regenerative (TSR) kilns. This limestone consists of laminated clotted peloidal micrite and fenestrate microbial boundstone with herringbone calcite and organic carbon (kerogen) within stylolites. Diagenetic modifications include hypidiotopic dolomite, micrite to microsparite recrystallization, stylolites, poikilotopic calcite, chert and saddle dolomite replacements. Burning and technical tests widely attest that the Neoarchean limestone is sensitive to high temperature, showing an unusual and drastically pronounced sintering or overburning tendency. The slaking reactivity, according to EN 459-2 is high for lime burnt at 1050 A degrees C, but rapidly decreases for lime burnt at 1150 A degrees C. The predominant micritic microbial textures, coupled with the organic carbon, are key-factors influencing the low burnability and the high sintering tendency. The presence of burial cementation, especially poikilotopic calcite, seems to promote higher burnability, either in terms of starting calcination temperature, or in terms of higher carbonate dissociation rate. In fact, the highest calcination velocity determined by thermal analysis is consistent with the highest slaking reactivity of the lower stratum of the quarry, enriched in poikilotopic calcite. Secondly, locally concentered dolomitic marly limestones, and sporadic back shales negatively affects the quicklime reactivity, as well. This study confirms that a multidisciplinary analytical approach is essential for selecting the best raw mix for achieving the highest lime reactivity in TSR kilns
I sistemi carbonatici giurassici della Sardegna orientale (Golfo di Orosei) ed eventi deposizionali nel sistema carbonatico giurassico-cretacico della Nurra (Sardegna nord-occidentale)
This field trip gives a panoramic of the facies association and sedimentological-stratigraphic evolution of
Jurassic-Cretaceous depositional systems of eastern (Golfo di Orosei) and western (Nurra) Sardinia. Carbonate
deposition in western Sardinia occurred in an epeiric sea during Jurassic and Cretaceous whereas carbonates
of the eastern Sardinia figure out a complex depositional settings with intraplatformal basins facing the Alpine
Tethys from a basal transgression in the Bajocian to Berriasian. The presence of partly coeval succession allows
a comparison between these two depositional systems and highlights relation with global and regional events.
The Jurassic-Cretaceous carbonate succession of Sardinia shows similarities with coeval succession of the
Provencal-Pyrenean domain (Nurra), nevertheless differences, both in terms of facies characters and distribution
and range of stratigraphic gaps, occur between the successions of eastern Sardinia. These differences can
be ascribed to different paleogeographic and depositional settings
STRATIGRAPHY, PALEOGEOGRAPHY AND GENETIC MODEL OF LATE CARNIAN CARBONATE BRECCIAS (CASTRO FORMATION, LOMBARDY, ITALY)
The stratigraphic and paleogeographic analysis of the Carnian-Norian boundary succession in central Lombardy allows the recognition of a new unit, the Castro Formation. This unit, 100-250 m thick, is represented by carbonatic intraformational breccias and associated limestones. Two lithozones have been recognized in the Castro Fm.: the lower one, heteropic with the S.Giovanni Bianco Fm., with dark dolomitic limestones and breccias intercalations, and the upper lithozone, massive, with amalgamated calcareous breccias. Microfacies, recrystallized and often tectonized, consist of mudstones, wackestones and fine packstones, locally rich in ostracods. Geochemical analyses show differences between the Castro Fm. and the overlying and underlying units, possibly because of early diagenetic meteoric imprint. The Castro Fm. depositional setting is represented by coastal ephemeral lakes with periodic emersions and erosional, tectonically controlled phenomena in a monsoonal regime
Origin of the Breno and Esino dolomites in the western Southern Alps (Italy): Implications for a volcanic influence
The Esino Limestone of the western Southern Alps represents a differentiated Ladinian-Lower Carnian (?)
carbonate platform comprised of margin, slope and peritidal inner platform facies up to 1000 m thick. A
major regional subaerial exposure event lead to coverage by another peritidal Lower Carnian carbonate
platform (Breno Formation). Multiphase dolomitization affected the carbonate sediments. Petrographic
examinations identified at least three main generations of dolomites (D1, D2, and D3) that occur as both
replacement and fracture-filling cements. These phases have crystal-size ranges of 3e35 mm (dolomicrite
D1), 40e600 mm (eu-to subhedral crystals D2), and 200 mm to 5 mm (cavity- and fracture-filling anhedral
to subhedral saddle dolomite D3), respectively.
The fabric retentive near-micritic grain size coupled with low mean Sr concentration (76 \ub1 37 ppm)
and estimated d18O of the parent dolomitizing fluids of D1 suggest formation in shallow burial setting at
temperature ~ 45e50 C with possible contributions from volcanic-related fluids (basinal fluids circulated
in volcaniclastics or related to volcanic activity), which is consistent with its abnormally high Fe
(4438 \ub1 4393 ppm) and Mn (1219 \ub1 1418 ppm) contents. The larger crystal sizes, homogenization
temperatures (D2, 108 \ub1 9 C; D3, 111 \ub1 14 C) of primary two-phase fluid inclusions, and calculated
salinity estimates (D2, 23 \ub1 2 eq wt% NaCl; D3, 20 \ub1 4 eq wt% NaCl) of D2 and D3 suggest that they
formed at later stages under mid-to deeper burial settings at higher temperatures from dolomitizing
fluids of higher salinity, which is supported by higher estimated d18O values of their parent dolomitizing
fluids. This is also consistent with their high Fe (4462 \ub1 4888 ppm; and 1091 \ub1 1183 ppm, respectively)
and Mn (556 \ub1 289 ppm and 1091 \ub1 1183 ppm) contents, and low Sr concentrations (53 \ub1 31 ppm and
57 \ub1 24 ppm, respectively).
The similarity in shale-normalized (SN) REE patterns and Ce (Ce/Ce*)SN and La (Pr/Pr*)SN anomalies of
the investigated carbonates support the genetic relationship between the dolomite generations and their
calcite precursor. Positive Eu anomalies, coupled with fluid-inclusion gas ratios (N2/Ar, CO2/CH4, Ar/He),
high F concentration, high F/Cl and high Cl/Br molar ratios suggest an origin from diagenetic fluids
circulated through volcanic rocks, which is consistent with the co-occurrence of volcaniclastic lenses in
the investigated sequence
Chemo-Biostratigraphic characterization of the Triassic/Jurassic boundary interval in the Western Southern Alps
The latemost Triassic was marked by a major mass extinction event, following profound global environmental changes likely related to the activity of the Central Atlantic Magmatic Province (CAMP),
including: i) rapid sea-level fluctuations, ii) perturbations of the global C cycle, iii) and the collapse of the carbonate biological factory. Several studies tempted to stratigraphically constrain this
global event and reconstruct the causative dynamics behind this dramatic extinction. In this work, we investigated the freshly-caved Italcementi active Quarry section, outcropping on the Mt. Albenza
(Lombardy Basin, Southern Alps, Italy), for organic and carbonate carbon isotopes and calcareous nannofossils, contributing to the stratigrafic and paleoceanographic characterization of the end-
Triassic interval. The new isotopic data highlight the occurrence of three 13C anomalies, which have been demostrated to be of global significance and to correspond to: 1) the late Rhaetian \u201cprecursor Carbon Isotope Excursion (CIE)\u201d; 2) the latemost Rhaetian \u201cinitial negative CIE\u201d; 3) and the Early Jurassic \u201cmain CIE\u201d. These excursions likely correspond to different phases of the CAMP volcanism probably responsible for perturbations in the ocean-atmoshpere system. We identify changes in nannofossil abundance and composition in correspondence of these intervals. In particular, a turnover is detected in correspondence of the \u201cinitial negative CIE\u201d with the first occurrence of Jurassic species coinciding with the end of the 13C anomaly thus being at a lower stratigraphic level than found in other localities worldwide. Further analyses are therefore required to cast light on this new evidence
Maintenance treatment of renal anaemia in haemodialysis patients with methoxy polyethylene glycol-epoetin beta versus darbepoetin alfa administered monthly: a randomized comparative trial
Background. Several studies with erythropoiesis-stimulating agents claim that maintenance therapy of renal anaemia may be possible at extended dosing intervals; however, few studies were randomized, results varied, and comparisons between agents were absent. We report results of a multi-national, randomized, prospective trial comparing haemoglobin maintenance with methoxy polyethylene glycol-epoetin beta and darbepoetin alfa administered once monthly
The Micro-Elimination Approach to Eliminating Hepatitis C:Strategic and Operational Considerations
The introduction of efficacious new hepatitis C virus (HCV) treatments galvanized the World Health Organization to define ambitious targets for eliminating HCV as a public health threat by 2030. Formidable obstacles to reaching this goal can best be overcome through a micro-elimination approach, which entails pursuing elimination goals in discrete populations through multi-stakeholder initiatives that tailor interventions to the needs of these populations. Micro-elimination is less daunting, less complex, and less costly than full-scale, country-level initiatives to eliminate HCV, and it can build momentum by producing small victories that inspire more ambitious efforts. The micro-elimination approach encourages stakeholders who are most knowledgeable about specific populations to engage with each other and also promotes the uptake of new models of care. Examples of micro-elimination target populations include medical patients, people who inject drugs, migrants, and prisoners, although candidate populations can be expected to vary greatly in different countries and subnational areas
- …