27,090 research outputs found
Comparison of techniques to reconstruct VHE gamma-ray showers from multiple stereoscopic Cherenkov images
For air showers observed simultaneously by more than two imaging atmospheric
Cherenkov telescopes, the shower geometry is overconstrained by the images and
image information should be combined taking into account the quality of the
images. Different algorithms are discussed and tested experimentally using data
obtained from observations of Mkn 501 with the HEGRA IACT system. Most of these
algorithms provide an estimate of the accuracy of the reconstruction of shower
geometry on an event-by-event basis, allowing, e.g., to select higher-quality
subsamples for precision measurements.Comment: 14 Pages, 6 figures, Late
Direct comparison of the performance of CZT detectors contacted with various metals
Cadmium Zinc Telluride (CZT) achieves excellent spatial resolution and good
energy resolution over the broad energy range from several keV into the MeV
energy range. In this paper we present the results of a systematic study of the
performance of CZT detectors manufacturered by Orbotech (before IMARAD)
depending on surface preparation, contact materials and contact deposition. The
standard Orbotech detectors have the dimension of 2.0 x 2.0 x 0.5 cm. They have
a pixellated In anode with 8 x 8 pixels and a monolithic In cathode. Using the
same CZT substrates several times, we have made a direct comparison of the
performance of different contact materials by replacing the cathode and/or the
anode contacts with several high-workfunction metals. We present the
performance of the detectors and conclude with an overview over our ongoing
detector optimization.Comment: 8 pages, 5 figures, to appear in the proceedings of the conference
5922, "Hard X-Ray and Gamma-Ray Detector Physics VII" on the "Optics &
Photonics 2005" SPIE Symposium, July 31- August 4, 2005, San Diego, C
Investigation of beauty production and parton shower effects at LHC
We present hadron-level predictions from the Monte Carlo generator Cascade
and parton level calculations of open b quark, b-flavored hadron and inclusive
b-jet production in the framework of the kt-factorization QCD approach for the
LHC energies. The unintegrated gluon densities in a proton are determined using
the CCFM evolution equation and the Kimber-Martin-Ryskin (KMR) prescription.
Our predictions are compared with the first data taken by the CMS and LHCb
collaborations at 7 TeV. We study the theoretical uncertainties of our
calculations and investigate the effects coming from parton showers in initial
and final states. The special role of initial gluon transverse momenta in
description of the data is pointed out.Comment: 19 pages, 11 figures. arXiv admin note: substantial text overlap with
arXiv:1105.507
Superperturbation solver for quantum impurity models
We present a very efficient solver for the general Anderson impurity problem.
It is based on the perturbation around a solution obtained from exact
diagonalization using a small number of bath sites. We formulate a perturbation
theory which is valid for both weak and strong coupling and interpolates
between these limits. Good agreement with numerically exact quantum Monte-Carlo
results is found for a single bath site over a wide range of parameters. In
particular, the Kondo resonance in the intermediate coupling regime is well
reproduced for a single bath site and the lowest order correction. The method
is particularly suited for low temperatures and alleviates analytical
continuation of imaginary time data due to the absence of statistical noise
compared to quantum Monte-Carlo impurity solvers.Comment: 6 pages, 5 figure
Detailed Studies of Pixelated CZT Detectors Grown with the Modified Horizontal Bridgman Method
The detector material Cadmium Zinc Telluride (CZT), known for its high
resolution over a broad energy range, is produced mainly by two methods: the
Modified High-Pressure Bridgman (MHB) and the High-Pressure Bridgman (HPB)
process. This study is based on MHB CZT substrates from the company Orbotech
Medical Solutions Ltd. with a detector size of 2.0x2.0x0.5 cm^3, 8x8 pixels and
a pitch of 2.46 mm. Former studies have emphasized only on the cathode material
showing that high-work-function improve the energy resolution at lower
energies. Therfore, we studied the influence of the anode material while
keeping the cathode material constant. We used four different materials:
Indium, Titanium, Chromium and Gold with work-functions between 4.1 eV and 5.1
eV. The low work-function materials Indium and Titanium achieved the best
performance with energy resolutions: 2.0 keV (at 59 keV) and 1.9 keV (at 122
keV) for Titanium; 2.1 keV (at 59 keV) and 2.9 keV (at 122 keV) for Indium.
These detectors are very competitive compared with the more expensive ones
based on HPB material if one takes the large pixel pitch of 2.46 mm into
account. We present a detailed comparison of our detector response with 3-D
simulations, from which we determined the mobility-lifetime-products for
electrons and holes. Finally, we evaluated the temperature dependency of the
detector performance and mobility-lifetime-products, which is important for
many applications. With decreasing temperature down to -30C the breakdown
voltage increases and the electron mobility-lifetime-product decreases by about
30% over a range from 20C to -30C. This causes the energy resolution to
deteriorate, but the concomitantly increasing breakdown voltage makes it
possible to increase the applied bias voltage and restore the full performance.Comment: Accepted for publication in Astroparticle Physics, 25 pages, 13
figure
Unintegrated gluon distribution and soft pp collisions at LHC
We found the parameterization of the unintegrated gluon distribution from the
best description of the LHC data on the inclusive spectra of hadrons produced
in collisions at the mid-rapidity region and small transverse momenta. It
is different from the one obtained within perturbative QCD only at low
intrinsic transverse momenta . The application of this distribution to
analysis of the DIS allows us to get the results which do not contradict
the H1 and ZEUS data on the structure functions at low . So, the connection
between the soft processes at LHC and low- physics at HERA is found.Comment: 8 pages, 4 figures. Contributed to 3rd Workshop on Multi-Parton
Interactions at the LHC (MPI11), Hamburg, 21-25 November 201
Suppression of Higgsino mediated proton decay by cancellations in GUTs and strings
A mechanism for the enhancement for proton lifetime in
supersymmetric/supergravity (SUSY/SUGRA) grand unified theories (GUTs) and in
string theory models is discussed where Higgsino mediated proton decay arising
from color triplets (anti-triplets) with charges and
is suppressed by an internal cancellation due to contributions
from different sources. We exhibit the mechanism for an SU(5) model with
Higgs multiplets in addition to the usual Higgs structure of
the minimal model. This model contains both and
Higgs color triplets (anti-triplets) and simple constraints allow for a
complete suppression of Higgsino mediated proton decay. Suppression of proton
decay in an SU(5) model with Planck scale contributions is also considered. The
suppression mechanism is then exhibited for an SO(10) model with a unified
Higgs structure involving representations.The SU(5)
decomposition of contains and
and the cancellation mechanism arises among these
contributions which mirrror the SU(5) case. The cancellation mechanism appears
to be more generally valid for a larger class of unification models.
Specifically the cancellation mechanism may play a role in string model
constructions to suppress proton decay from dimension five operators. The
mechanism allows for the suppression of proton decay consistent with current
data allowing for the possibility that proton decay may be visible in the next
round of nucleon stability experiment.Comment: 26 pages, no figures. Revtex 4. To appear in Physical Review
- …