On the interplay between sedimentation and phase separation phenomena in two-dimensional colloidal fluids

Colloidal particles that are confined to an interface effectively form a two-dimensional fluid. We examine the dynamics of such colloids when they are subject to a constant external force, which drives them in a particular direction over the surface. Such a situation occurs, for example, for colloidal particles that have settled to the bottom of their container, when the container is tilted at an angle, so that they `sediment' to the lower edge of the surface. We focus in particular on the case when there are attractive forces between the colloids which causes them to phase separate into regions of high density and low density and we study the influence of this phase separation on the sedimentation process. We model the colloids as Brownian particles and use both Brownian dynamics computer simulations and dynamical density functional theory (DDFT) to obtain the time evolution of the ensemble average one-body density profiles of the colloids. We consider situations where the external potential varies only in one direction so that the ensemble average density profiles vary only in this direction. We solve the DDFT in one-dimension, by assuming that the density profile only varies in one direction. However, we also solve the DDFT in two-dimensions, allowing the fluid density profile to vary in both the $x$- and $y$-directions. We find that in certain situations the two-dimensional DDFT is clearly superior to its one-dimensional counterpart when compared with the simulations and we discuss this issue.Comment: 17 pages, 10 figures, submitted to Molecular Physic

Impacts of Co-Solvent Flushing on Microbial Populations Capable of Degrading Trichloroethylene

With increased application of co-solvent flushing technologies for removal of nonaqueous phase liquids from groundwater aquifers, concern over the effects of the solvent on native microorganisms and their ability to degrade residual contaminant has also arisen. This study assessed the impact of ethanol flushing on the numbers and activity potentials of trichloroethylene (TCE)-degrading microbial populations present in aquifer soils taken immediately after and 2 years after ethanol flushing of a former dry cleaners site. Polymerase chain reaction analysis revealed soluble methane monooxygenase genes in methanotrophic enrichments, and 16S rRNA analysis identified Methylocystis parvus with 98% similarity, further indicating the presence of a type II methanotroph. Dissimilatory sulfite reductase genes in sulfate-reducing enrichments prepared were also observed. Ethanol flushing was simulated in columns packed with uncontaminated soils from the dry cleaners site that were dosed with TCE at concentrations observed in the field; after flushing, the columns were subjected to a continuous flow of 500 pore volumes of groundwater per week. Total acridine orange direct cell counts of the flushed and nonflushed soils decreased over the 15-week testing period, but after 5 weeks, the flushed soils maintained higher cell counts than the nonflushed soils. Inhibition of methanogenesis by sulfate reduction was observed in all column soils, as was increasing removal of total methane by soils incubated under methanotrophic conditions. These results showed that impacts of ethanol were not as severe as anticipated and imply that ethanol may mitigate the toxicity of TCE to the microorganisms

An exploration of familial associations of two movement pattern-derived subgroups of chronic disabling low back pain; a cross-sectional cohort study

© 2016 Elsevier Ltd. Background: Altered movement patterns with pain have been demonstrated in children, adolescents and adults with chronic disabling low back pain (CDLBP). A previously developed classification system has identified different subgroups including active extension and multidirectional patterns in patients with CDLBP. While familial associations have been identified for certain spinal postures in standing, it is unknown whether a familial relationship might exist between movement pattern-derived subgroups in families with CDLBP. Objectives: This study explored whether familial associations in movement pattern-derived subgroups within and between members of families with CDLBP existed. Design: Cross-sectional cohort study. Method: 33 parents and 28 children with CDLBP were classified into two subgroups based on clinical analysis of video footage of postures and functional movements, combined with aggravating factors obtained from Oswestry Disability Questionnaire. Prevalence of subgroups within family members was determined, associations between parent and child's subgroup membership was evaluated using Fisher's exact test, and spearman's correlation coefficient was used to determine the strength of association between familial dyads. Results: The majority of parents were classified as active extenders, sons predominately multidirectional and daughters were evenly distributed between the two subgroups. No significant association was found when comparing subgroups in nine parent-child relationships. Conclusions: The exploration of a small cohort of family dyads in this study demonstrated that children's movement pattern-derived subgroups could not be explained by their parents' subgroup membership. These results cannot be generalised to the CLBP population due to this study's small sample. Larger sample studies are needed to further elucidate this issue

Spirocycles as Rigidified sp3-Rich Scaffolds for a Fragment Collection.

Novel divergent methodology to access sp3-rich spirocyclic fragments is reported. First, a robust modular synthesis of bis-alkene amino ester building blocks was developed. Three different carbocycles and six heterocycles were then constructed to assemble eight spirocycles. Importantly, strategic exit vectors were incorporated within each scaffold to aid fragment growth and were elaborated via chemical modifications. Finally, computational methods demonstrate higher levels of rigidity, three-dimensionality, and structural diversity of the library compared to a commercial collection

Inferring hidden Markov models from noisy time sequences: a method to alleviate degeneracy in molecular dynamics

We present a new method for inferring hidden Markov models from noisy time sequences without the necessity of assuming a model architecture, thus allowing for the detection of degenerate states. This is based on the statistical prediction techniques developed by Crutchfield et al., and generates so called causal state models, equivalent to hidden Markov models. This method is applicable to any continuous data which clusters around discrete values and exhibits multiple transitions between these values such as tethered particle motion data or Fluorescence Resonance Energy Transfer (FRET) spectra. The algorithms developed have been shown to perform well on simulated data, demonstrating the ability to recover the model used to generate the data under high noise, sparse data conditions and the ability to infer the existence of degenerate states. They have also been applied to new experimental FRET data of Holliday Junction dynamics, extracting the expected two state model and providing values for the transition rates in good agreement with previous results and with results obtained using existing maximum likelihood based methods.Comment: 19 pages, 9 figure

The binding characteristics and orientation of a novel radioligand with distinct properties at 5-HT3A and 5-HT3AB receptors.

VUF10166 (2-chloro-3-(4-methyl piperazin-1-yl)quinoxaline) is a ligand that binds with high affinity to 5-HT3 receptors. Here we synthesise [(3)H]VUF10166 and characterise its binding properties at 5-HT3A and 5-HT3AB receptors. At 5-HT3A receptors [(3)H]VUF10166 displayed saturable binding with a Kd of 0.18 nM. Kinetic measurements gave monophasic association (6.25 × 10(7) M(-1) min(-1)) and dissociation (0.01 min(-1)) rates that yielded a similar Kd value (0.16 nM). At 5-HT3AB receptors two association (6.15 × 10(-7), 7.23 M(-1) min(-1)) and dissociation (0.024, 0.162 min(-1)) rates were seen, yielding Kd values (0.38 nM and 22 nM) that were consistent with values obtained in saturation (Kd = 0.74 nM) and competition (Ki = 37 nM) binding experiments respectively. At both receptor types, specific binding was inhibited by classical 5-HT3 receptor-selective orthosteric ligands (5-HT, allosetron, d-tubocurarine, granisetron, mCPBG, MDL72222, quipazine), but not by non-competitive antagonists (bilobalide, ginkgolide B, picrotoxin) or competitive ligands of other Cys-loop receptors (ACh, bicuculline, glycine, gabazine). To explore VUF10166 ligand-receptor interactions we used in silico modelling and docking, and tested the predictions using site directed mutagenesis. The data suggest that VUF10166 adopts a similar orientation to 5-HT3 receptor agonists bound in AChBP (varenicline) and 5HTBP (5-HT) crystal structures.This is the final version. It was first published by Elsevier at http://www.sciencedirect.com/science/article/pii/S002839081400291

Comparison of DC Bead-irinotecan and DC Bead-topotecan drug eluting beads for use in locoregional drug delivery to treat pancreatic cancer

DC Bead is a drug delivery embolisation system that can be loaded with doxorubicin or irinotecan for the treatment of a variety of liver cancers. In this study we demonstrate that the topoisomerase I inhibitor topotecan hydrochloride can be successfully loaded into the DC Bead sulfonate-modified polyvinyl alcohol hydrogel matrix, resulting in a sustained-release drug eluting bead (DEBTOP) useful for therapeutic purposes. The in vitro drug loading capacity, elution characteristics and the effects on mechanical properties of the beads are described with reference to our previous work with irinotecan hydrochloride (DEBIRI). Results showed that drug loading was faster when the solution was agitated compared to static loading and a maximum loading of ca. 40–45 mg topotecan in 1 ml hydrated beads was achievable. Loading the drug into the beads altered the size, compressibility moduli and colour of the bead. Elution was shown to be reliant on the presence of ions to perform the necessary exchange with the electrostatically bound topotecan molecules. Topotecan was shown by MTS assay to have an IC50 for human pancreatic adenocarcinoma cells (PSN-1) of 0.22 and 0.27 lM compared to 28.1 and 19.2 lM for irinotecan at 48 and 72 h, respectively. The cytotoxic efficacy of DEBTOP on PSN-1 was compared to DEBIRI. DEPTOP loaded at 6 & 30 mg ml-1, like its free drug form, was shown to be more potent than DEBIRI of comparable doses at 24, 48 & 72 h using a slightly modified MTS assay. Using a PSN-1 mouse xenograft model, DEBIRI doses of 3.3–6.6 mg were shown to be well tolerated (even with repeat administration) and effective in reducing the tumour size. DEBTOP however, was lethal after 6 days at doses of 0.83–1.2 mg but demonstrated reasonable efficacy and tolerability (again with repeat injection possible) at 0.2–0.4 mg doses. Care must therefore be taken when selecting the dose of topotecan to be loaded into DC Bead given its greater potency and potential toxicity

Black Hole Deconstruction

A D4-D0 black hole can be deconstructed into a bound state of D0 branes with a D6-anti-D6 pair containing worldvolume fluxes. The exact spacetime solution is known and resembles a D0 accretion disk surrounding a D6-anti-D6 core. We find a scaling limit in which the disk and core drop inside an AdS_2 throat. Crossing this AdS_2 throat and the D0 accretion disk into the core, we find a second scaling region describing the D6-anti-D6 pair. It is shown that the M-theory lift of this region is AdS_3 x S^2. Surprisingly, time translations in the far asymptotic region reduce to global, rather than Poincare, time translations in this core AdS_3. We further find that the quantum mechanical ground state degeneracy reproduces the Bekenstein-Hawking entropy-area law.Comment: 11 page

Room temperature ionic liquids with two symmetric ions

Room temperature ionic liquids typically contain asymmetric organic cations. The asymmetry is thought to enhance disorder, thereby providing an entropic counter-balance to the strong, enthalpic, ionic interactions, and leading, therefore, to lower melting points. Unfortunately, the synthesis and purification of such asymmetric cations is typically more demanding. Here we introduce novel room temperature ionic liquids in which both cation and anion are formally symmetric. The chemical basis for this unprecedented behaviour is the incorporation of ether-containing side chains – which increase the configurational entropy – in the cation. Molecular dynamics simulations indicate that the ether-containing side chains transiently sample curled configurations. Our results contradict the long-standing paradigm that at least one asymmetric ion is required for ionic liquids to be molten at room temperature, and hence open up new and simpler design pathways for these remarkable materials

A fluorescent approach for identifying P2X1 ligands.

There are no commercially available, small, receptor-specific P2X1 ligands. There are several synthetic derivatives of the natural agonist ATP and some structurally-complex antagonists including compounds such as PPADS, NTP-ATP, suramin and its derivatives (e.g. NF279, NF449). NF449 is the most potent and selective ligand, but potencies of many others are not particularly high and they can also act at other P2X, P2Y and non-purinergic receptors. While there is clearly scope for further work on P2X1 receptor pharmacology, screening can be difficult owing to rapid receptor desensitisation. To reduce desensitisation substitutions can be made within the N-terminus of the P2X1 receptor, but these could also affect ligand properties. An alternative is the use of fluorescent voltage-sensitive dyes that respond to membrane potential changes resulting from channel opening. Here we utilised this approach in conjunction with fragment-based drug-discovery. Using a single concentration (300 μM) we identified 46 novel leads from a library of 1443 fragments (hit rate = 3.2%). These hits were independently validated by measuring concentration-dependence with the same voltage-sensitive dye, and by visualising the competition of hits with an Alexa-647-ATP fluorophore using confocal microscopy; confocal yielded kon (1.142 × 10(6) M(-1) s(-1)) and koff (0.136 s(-1)) for Alexa-647-ATP (Kd = 119 nM). The identified hit fragments had promising structural diversity. In summary, the measurement of functional responses using voltage-sensitive dyes was flexible and cost-effective because labelled competitors were not needed, effects were independent of a specific binding site, and both agonist and antagonist actions were probed in a single assay. The method is widely applicable and could be applied to all P2X family members, as well as other voltage-gated and ligand-gated ion channels. This article is part of the Special Issue entitled 'Fluorescent Tools in Neuropharmacology'.Our thanks are given to Richard Evans for the P2X1 cDNA, and to Prof. Oliver Mühlemann for kindly providing lab space for M-DR. M-DR was supported by the HOLCIM Stiftung zur Förderung der wissenschaftlichen Fortbildung. The British Heart Foundation supported AJT (grant; PG/13/39/30293) and RWF (grant; RG/09/003/27122).This is the final version of the article. It first appeared from Elsevier via http://dx.doi.org/10.1016/j.neuropharm.2015.05.01