Influence of pretreatment of agriculture residues on phytase production by Aspergillus niger NCIM 563 under submerged fermentation conditions

The extracellular phytase production by Aspergillus niger NCIM 563 was evaluated in medium containing various agriculture residues under submerged fermentation conditions. Phytase productionwas affected by inorganic phosphate content of agriculture residues which ranged from 2.8 to 8 mg/g. The agriculture residues containing less than 4 mg/g inorganic phosphate supported phytaseproduction with maximum activity of 68 IU/ml in medium containing 1% rice bran on 11th day of fermentation. Addition of glucose up to 5% in fermentation medium containing 1% rice bran, enhancedphytase production. Pretreatment of agriculture residues with water to remove excess inorganic phosphate has significantly enhanced the phytase activity in case of de-oiled rice bran, wheat bran,peanut cake (low and high oil) and coconut cake. Maximum increase of 20.3 times in phytase activity was observed in case of wheat bran as compared to de-oiled rice bran, coconut cake, peanut cake highand low oil in which the increase in phytase activity was 6.85, 6.1, 5.3 and 3.0 times, respectively. Maximum phytase activity of 68 IU/ml was produced on the 11th day of fermentation compared to earlierreported 41.47 IU/ml phytase activity on the 15th day of submerged fermentation using 5% dextrin and 2.5% glucose, thus increasing productivity

Initiation of Psychotropic Medication after Partner Bereavement: A Matched Cohort Study

Background Recent changes to diagnostic criteria for depression in DSM-5 remove the bereavement exclusion, allowing earlier diagnosis following bereavement. Evaluation of the potential effect of this change requires an understanding of existing psychotropic medication prescribing by non-specialists after bereavement. Aims To describe initiation of psychotropic medication in the first year after partner bereavement. Methods In a UK primary care database, we identified 21,122 individuals aged 60 and over with partner bereavement and no psychotropic drug use in the previous year. Prescribing (anxiolytic/hypnotic, antidepressant, antipsychotic) after bereavement was compared to age, sex and practice matched controls. Results The risks of receiving a new psychotropic prescription within two and twelve months of bereavement were 9.5% (95% CI 9.1 to 9.9%) and 17.9% (17.3 to 18.4%) respectively; an excess risk of initiation in the first year of 12.4% compared to non-bereaved controls. Anxiolytic/hypnotic and antidepressant initiation rates were highest in the first two months. In this period, the hazard ratio for initiation of anxiolytics/hypnotics was 16.7 (95% CI 14.7 to 18.9) and for antidepressants was 5.6 (4.7 to 6.7) compared to non-bereaved controls. 13.3% of those started on anxiolytics/hypnotics within two months continued to receive this drug class at one year. The marked variation in background family practice prescribing of anxiolytics/hypnotics was the strongest determinant of their initiation in the first two months after bereavement. Conclusion Almost one in five older people received a new psychotropic drug prescription in the year after bereavement. The early increase and trend in antidepressant use after bereavement suggests some clinicians did not adhere to the bereavement exclusion, with implications for its recent removal in DSM-5. Family practice variation in use of anxiolytics/hypnotics suggests uncertainty over their role in bereavement with the potential for inappropriate long term use

A new method to estimate the lifetime of long-life product categories

Increased recycling and reuse rates are a central part of the objectives laid out by the COP21. Nonetheless, the practical implementation of what has been called the circular economy, as well as its true potential are not easily established. This is because the impact and implementation time scales of any intervention depend on knowing the lifetime of products, which is frequently unknown. This is particularly true in construction, responsible for 39% of worldwide emissions, 11% of which are embodied. Most MFA models will simply assume a range of plausible life expectancies when bottom-up data is lacking (e.g. for buildings). In this work, we propose a novel method of identification using the high quality but highly aggregated trade data available, and use it to establish a “mortality curve” for buildings and other long-lasting products. This identification method is intended to provide more reliable inputs to existing MFA models. It is widely applicable due to the general availability of the underlying data. Using it on UK trade data, we identify product classes at 1 year for packaging/home scrap, one around 10 years for vehicles/equipment, and around 50 years for construction. The identification approach was then validated using classical approaches using bottom up data for vehicles

Design and optimization of electrochemical microreactors for continuous electrosynthesis

The study focuses on the design and construction, as well as the theoretical and experimental optimization of electrochemical filter press microreactors for the electrosynthesis of molecules with a high added value. The main characteristics of these devices are firstly a high-specific electrochemical area to increase conversion and selectivity, and secondly the shape and size of themicrochannels designed for a uniform residence time distribution of the fluid. A heat exchanger is integrated into the microstructured electrode to rapidly remove (or supply) the heat required in exo- or endothermic reactions. The microreactors designed are used to perform-specific electrosynthesis reactions such as thermodynamically unfavorable reactions (continuous NADH regeneration), or reactions with high enthalpy changes

Optimal design of multi-channel microreactor for uniform residence time distribution

Multi-channel microreactors can be used for various applications that require chemical or electrochemical reactions in either liquid, gaseous or multi phase. For an optimal control of the chemical reactions, one key parameter for the design of such microreactors is the residence time distribution of the fluid, which should be as uniform as possible in the series of microchannels that make up the core of the reactor. Based on simplifying assumptions, an analytical model is proposed for optimizing the design of the collecting and distributing channels which supply the series of rectangular microchannels of the reactor, in the case of liquid flows. The accuracy of this analytical approach is discussed after comparison with CFD simulations and hybrid analytical-CFD calculations that allow an improved refinement of the meshing in the most complex zones of the flow. The analytical model is then extended to the case of microchannels with other cross-sections (trapezoidal or circular segment) and to gaseous flows, in the continuum and slip flow regimes. In the latter case, the model is based on second-order slip flow boundary conditions, and takes into account the compressibility as well as the rarefaction of the gas flow

Allergic bronchopulmonary aspergillosis with coexistant aspergilloma: a case report

<p>Abstract</p> <p>Introduction</p> <p>The coexistence of allergic bronchopulmonary aspergillosis and aspergilloma is rare.</p> <p>Case presentation</p> <p>We present the case of a 56-year-old Caucasian man who worked as a farmer, with infiltrates in the right lower and middle lung lobes, partial consolidation of the middle lobe and with previous diagnosis of chronic obstructive bronchitis. Evaluation of our patient led to the diagnosis of allergic bronchopulmonary aspergillosis with coexistent aspergilloma in the right lower lobe. He was treated with oral methylprednisolone and itraconazole. At the five-year follow-up he is without any sign of recurrence.</p> <p>Conclusion</p> <p>Aspergillus infection after the inhalation of spores in the form of a hypersensitivity reaction and saprophytic colonization can be coexistent.</p

Acute encephalitis syndrome surveillance, Kushinagar district, Uttar Pradesh, India, 2011-2012

In India, quality surveillance for acute encephalitis syndrome (AES), including laboratory testing, is necessary for understanding the epidemiology and etiology of AES, planning interventions, and developing policy. We reviewed AES surveillance data for January 2011-June 2012 from Kushinagar District, Uttar Pradesh, India. Data were cleaned, incidence was determined, and demographic characteristics of cases and data quality were analyzed. A total of 812 AES case records were identified, of which 23\% had illogical entries. AES incidence was highest among boys<6 years of age, and cases peaked during monsoon season. Records for laboratory results (available for Japanese encephalitis but not AES) and vaccination history were largely incomplete, so inferences about the epidemiology and etiology of AES could not be made. The low-quality AES/Japanese encephalitis surveillance data in this area provide little evidence to support development of prevention and control measures, estimate the effect of interventions, and avoid the waste of public health resources

Stability and sensitivity of water T2 obtained with IDEAL-CPMG in healthy and fat-infiltrated skeletal muscle

Quantifying muscle water T2 (T2 -water) independently of intramuscular fat content is essential in establishing T2 -water as an outcome measure for imminent new therapy trials in neuromuscular diseases. IDEAL-CPMG combines chemical shift fat-water separation with T2 relaxometry to obtain such a measure. Here we evaluate the reproducibility and B1 sensitivity of IDEAL-CPMG T2 -water and fat fraction (f.f.) values in healthy subjects, and demonstrate the potential of the method to quantify T2 -water variation in diseased muscle displaying varying degrees of fatty infiltration. The calf muscles of 11 healthy individuals (40.5 ± 10.2 years) were scanned twice at 3 T with an inter-scan interval of 4 weeks using IDEAL-CPMG, and 12 patients with hypokalemic periodic paralysis (HypoPP) (42.3 ± 11.5 years) were also imaged. An exponential was fitted to the signal decay of the separated water and fat components to determine T2 -water and the fat signal amplitude muscle regions manually segmented. Overall mean calf-level muscle T2 -water in healthy subjects was 31.2 ± 2.0 ms, without significant inter-muscle differences (p = 0.37). Inter-subject and inter-scan coefficients of variation were 5.7% and 3.2% respectively for T2 -water and 41.1% and 15.4% for f.f. Bland-Altman mean bias and ±95% coefficients of repeatability were for T2 -water (0.15, -2.65, 2.95) ms and f.f. (-0.02, -1.99, 2.03)%. There was no relationship between T2 -water (ρ = 0.16, p = 0.07) or f.f. (ρ = 0.03, p = 0.7761) and B1 error or any correlation between T2 -water and f.f. in the healthy subjects (ρ = 0.07, p = 0.40). In HypoPP there was a measurable relationship between T2 -water and f.f. (ρ = 0.59, p < 0.001). IDEAL-CPMG provides a feasible way to quantify T2 -water in muscle that is reproducible and sensitive to meaningful physiological changes without post hoc modeling of the fat contribution. In patients, IDEAL-CPMG measured elevations in T2 -water and f.f. while showing a weak relationship between these parameters, thus showing promise as a practical means of quantifying muscle water in patient populations