Potential impacts of industrial structure on energy consumption and CO2 emission: a case study of Beijing

An optimization model is developed based on the Input–Output model to assess the potential impacts of industrial structure on the energy consumption and CO2 emission. The method is applied to a case study of industrial structure adjustment in Beijing, China. Results demonstrate that industrial structure adjustment has great potential of energy conservation and carbon reduction. When the average annual growth rate of GDP is 8.29% from 2010 to 2020, industrial structure adjustment can save energy by 39.42% (50.06 million tons of standard coal equivalent), and reduce CO2 emission by 46.06% (96.31 million tons) in Beijing in 2020. Second, Beijing had better strive to develop several low energy intensive and low carbon intensive sectors, such as information transmission, computer service and software, and finance. Third, energy intensity is possible to decrease without negatively affecting economic growth by reasonable industrial structure adjustment. Four, compared to “intensity targets”, “total amount targets” are more effective on the energy conservation and carbon reduction, but have much greater negative effects on economic growth. Therefore, it needs to be balanced between “total amount targets” and “intensity targets”

Defect-mediated ferromagnetism in ZnO:Mn nanorods

In this work, the structural, chemical and magnetic properties of ZnO:Mn nanorods were investigated. Firstly, well-aligned ZnO nanorods with their long axis parallel to the crystalline c-axis were successfully grown by the vapor phase transport technique on Si substrates coated with a ZnO buffer layer. Mn metal was then diffused into these nanorods at different temperatures in vacuum. From SEM results, ZnO:Mn nanorods were observed to have diameters of ~100 nm and lengths of 4 µm. XPS analysis showed that the Mn dopant substituted into the ZnO matrix with a valence state of +2. Magnetic measurements performed at room temperature revealed that undoped ZnO nanorods exhibit ferromagnetic behavior which may be related to oxygen vacancy defect-mediated d0 ferromagnetism. ZnO:Mn samples were seen to show an excess room temperature ferromagnetism that is attributed to the presence of oxygen vacancy defects forming bound magnetic polarons involving Mn

Direct Inhibition of GSK3β by the Phosphorylated Cytoplasmic Domain of LRP6 in Wnt/β-Catenin Signaling

Wnt/β-catenin signaling plays a central role in development and is also involved in a diverse array of diseases. Binding of Wnts to the coreceptors Frizzled and LRP6/5 leads to phosphorylation of PPPSPxS motifs in the LRP6/5 intracellular region and the inhibition of GSK3β bound to the scaffold protein Axin. However, it remains unknown how GSK3β is specifically inhibited upon Wnt stimulation. Here, we show that overexpression of the intracellular region of LRP6 containing a Ser/Thr rich cluster and a PPPSPxS motif impairs the activity of GSK3β in cells. Synthetic peptides containing the PPPSPxS motif strongly inhibit GSK3β in vitro only when they are phosphorylated. Microinjection of these peptides into Xenopus embryos confirms that the phosphorylated PPPSPxS motif potentiates Wnt-induced second body axis formation. In addition, we show that the Ser/Thr rich cluster of LRP6 plays an important role in LRP6 binding to GSK3β. These observations demonstrate that phosphorylated LRP6/5 both recruits and directly inhibits GSK3β using two distinct portions of its cytoplasmic sequence, and suggest a novel mechanism of activation in this signaling pathway

Genome editing reveals a role for OCT4 in human embryogenesis.

Despite their fundamental biological and clinical importance, the molecular mechanisms that regulate the first cell fate decisions in the human embryo are not well understood. Here we use CRISPR-Cas9-mediated genome editing to investigate the function of the pluripotency transcription factor OCT4 during human embryogenesis. We identified an efficient OCT4-targeting guide RNA using an inducible human embryonic stem cell-based system and microinjection of mouse zygotes. Using these refined methods, we efficiently and specifically targeted the gene encoding OCT4 (POU5F1) in diploid human zygotes and found that blastocyst development was compromised. Transcriptomics analysis revealed that, in POU5F1-null cells, gene expression was downregulated not only for extra-embryonic trophectoderm genes, such as CDX2, but also for regulators of the pluripotent epiblast, including NANOG. By contrast, Pou5f1-null mouse embryos maintained the expression of orthologous genes, and blastocyst development was established, but maintenance was compromised. We conclude that CRISPR-Cas9-mediated genome editing is a powerful method for investigating gene function in the context of human development.DW was supported by the National Institute for Health Research (NIHR) Oxford Biomedical Research Centre Programme. NK was supported by the University of Oxford Clarendon Fund. AB was supported by a British Heart Foundation PhD Studentship (FS/11/77/39327). LV was supported by core grant funding from the Wellcome Trust and Medical Research Council (PSAG028). J-SK was supported by the Institute for Basic Science (IBS-R021-D1). Work in the KKN and JMAT labs was supported by the Francis Crick Institute which receives its core funding from Cancer Research UK, the UK Medical Research Council, and the Wellcome Trust (FC001120 and FC001193)

Einfluss der Verarbeitungstechnologie und Werkstoffzusammensetzung auf die Struktur-Eigenschafts-Beziehungen von thermoplastischen Nanoverbundwerkstoffen

Die Einarbeitung von nanoskaligen Füllstoffen zur Steigerung von polymeren Eigenschaftsprofilen ist sehr viel versprechend und stößt daher heutzutage sowohl in der Forschung als auch in der Industrie auf großes Interesse. Bedingt durch ausgeprägte Oberflächen und hohe Anziehungskräfte, liegen Nanopartikel allerdings nicht singulär sondern als Partikelanhäufungen, so genannten Agglomeraten oder Aggregaten, vor. Zur Erzielung der gewünschten Materialverbesserungen gilt es, diese aufzuspalten und homogen in der polymeren Matrix zu verteilen. Bei thermoplastischen Kunststoffen ist die gleichläufige Doppelschneckenextrusion eines der gängigsten Verfahren zur Einarbeitung von Additiven und Füllstoffen. Aus diesem Grund war es Ziel dieser Arbeit, mittels dieses Verfahrens verbesserte Verbundwerkstoffe mit Polyamid 66- und Polyetheretherketon-Matrix, durch Einarbeitung von nanoskaligem Titandioxid (15 und 300 nm), zu generieren. In einem ersten Schritt wurden die verfahrenstechnischen Parameter, wie Drehzahl und Durchsatz, sowie die Prozessführung und damit deren Einfluss auf die Materialeigenschaften beleuchtet. Der spezifische Energieeintrag ist ausschlaggebend zur Deagglomeration der Nanopartikel. Dieser zeigte leichte Abhängigkeiten von der Drehzahl und dem Durchsatz und verursachte bei der Einarbeitung der Partikel keine wesentlichen Unterschiede in der Aufspaltung der Partikel sowie gar keine in den resultierenden mechanischen Eigenschaften. Die Prozessführung wurde unterteilt in Mehrfach- und Einfachextrusion. Die Herstellung eines hochgefüllten Masterbatches, dessen mehrfaches Extrudieren und anschließendes Verdünnen, führte zu einer sehr guten Deagglomeration und stark verbesserten Materialeigenschaften. Mittels Simulation des Extrusionsprozesses konnte festgestellt werden, dass das Vorhandensein von ungeschmolzenem Granulat in der Verfahrenszone zu einer Schmelze/Nanopartikel/ Feststoffreibung führt, die die Ursache für eine sehr gute Aufspaltung der Partikel zu sein scheint. Durch Modifikation des Extrusionsprozesses erreichte die Einfachextrusion annähernd den Grad an Deagglomeration bei Mehrfachextrusion, wobei die Materialien bei letzterem Verfahren die besten Eigenschaftsprofile aufwiesen. In einem zweiten Schritt wurde ein Vergleich der Einflüsse von unterschiedlichen Partikelgrößen und –gehalten auf die polymeren Matrizes vollzogen. Die 15 nm Partikel zeigten signifikant bessere mechanische Ergebnisse auf als die 300 nm Partikel, und die Wirkungsweise des 15 nm Partikels auf Polyetheretherketon war stärker als auf Polyamid 66. Es konnten Steigerungen in Steifigkeit, Festigkeit und Zähigkeit erzielt werden. Rasterelektronenmikroskopische Aufnahmen bestätigten diese Ergebnisse. Eine Berechnung der Plan-Selbstkosten von einem Kilogramm PEEK-Nanoverbundwerkstoff im Vergleich zu einem Kilogramm unverstärktem PEEK verdeutlichte, dass ein Material kreiert wurde, welches deutlich verbesserte Eigenschaften bei gleichem Preis aufweist. Zusammenfassend konnte in dieser Arbeit ein tieferes Verständnis des Extrusionsvorganges zur Herstellung von kostengünstigen und verbesserten Thermoplasten durch das Einbringen von Nanopartikeln gewonnen werden

Global burden of 288 causes of death and life expectancy decomposition in 204 countries and territories and 811 subnational locations, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021

BACKGROUND Regular, detailed reporting on population health by underlying cause of death is fundamental for public health decision making. Cause-specific estimates of mortality and the subsequent effects on life expectancy worldwide are valuable metrics to gauge progress in reducing mortality rates. These estimates are particularly important following large-scale mortality spikes, such as the COVID-19 pandemic. When systematically analysed, mortality rates and life expectancy allow comparisons of the consequences of causes of death globally and over time, providing a nuanced understanding of the effect of these causes on global populations. METHODS The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 cause-of-death analysis estimated mortality and years of life lost (YLLs) from 288 causes of death by age-sex-location-year in 204 countries and territories and 811 subnational locations for each year from 1990 until 2021. The analysis used 56 604 data sources, including data from vital registration and verbal autopsy as well as surveys, censuses, surveillance systems, and cancer registries, among others. As with previous GBD rounds, cause-specific death rates for most causes were estimated using the Cause of Death Ensemble model-a modelling tool developed for GBD to assess the out-of-sample predictive validity of different statistical models and covariate permutations and combine those results to produce cause-specific mortality estimates-with alternative strategies adapted to model causes with insufficient data, substantial changes in reporting over the study period, or unusual epidemiology. YLLs were computed as the product of the number of deaths for each cause-age-sex-location-year and the standard life expectancy at each age. As part of the modelling process, uncertainty intervals (UIs) were generated using the 2·5th and 97·5th percentiles from a 1000-draw distribution for each metric. We decomposed life expectancy by cause of death, location, and year to show cause-specific effects on life expectancy from 1990 to 2021. We also used the coefficient of variation and the fraction of population affected by 90% of deaths to highlight concentrations of mortality. Findings are reported in counts and age-standardised rates. Methodological improvements for cause-of-death estimates in GBD 2021 include the expansion of under-5-years age group to include four new age groups, enhanced methods to account for stochastic variation of sparse data, and the inclusion of COVID-19 and other pandemic-related mortality-which includes excess mortality associated with the pandemic, excluding COVID-19, lower respiratory infections, measles, malaria, and pertussis. For this analysis, 199 new country-years of vital registration cause-of-death data, 5 country-years of surveillance data, 21 country-years of verbal autopsy data, and 94 country-years of other data types were added to those used in previous GBD rounds. FINDINGS The leading causes of age-standardised deaths globally were the same in 2019 as they were in 1990; in descending order, these were, ischaemic heart disease, stroke, chronic obstructive pulmonary disease, and lower respiratory infections. In 2021, however, COVID-19 replaced stroke as the second-leading age-standardised cause of death, with 94·0 deaths (95% UI 89·2-100·0) per 100 000 population. The COVID-19 pandemic shifted the rankings of the leading five causes, lowering stroke to the third-leading and chronic obstructive pulmonary disease to the fourth-leading position. In 2021, the highest age-standardised death rates from COVID-19 occurred in sub-Saharan Africa (271·0 deaths [250·1-290·7] per 100 000 population) and Latin America and the Caribbean (195·4 deaths [182·1-211·4] per 100 000 population). The lowest age-standardised death rates from COVID-19 were in the high-income super-region (48·1 deaths [47·4-48·8] per 100 000 population) and southeast Asia, east Asia, and Oceania (23·2 deaths [16·3-37·2] per 100 000 population). Globally, life expectancy steadily improved between 1990 and 2019 for 18 of the 22 investigated causes. Decomposition of global and regional life expectancy showed the positive effect that reductions in deaths from enteric infections, lower respiratory infections, stroke, and neonatal deaths, among others have contributed to improved survival over the study period. However, a net reduction of 1·6 years occurred in global life expectancy between 2019 and 2021, primarily due to increased death rates from COVID-19 and other pandemic-related mortality. Life expectancy was highly variable between super-regions over the study period, with southeast Asia, east Asia, and Oceania gaining 8·3 years (6·7-9·9) overall, while having the smallest reduction in life expectancy due to COVID-19 (0·4 years). The largest reduction in life expectancy due to COVID-19 occurred in Latin America and the Caribbean (3·6 years). Additionally, 53 of the 288 causes of death were highly concentrated in locations with less than 50% of the global population as of 2021, and these causes of death became progressively more concentrated since 1990, when only 44 causes showed this pattern. The concentration phenomenon is discussed heuristically with respect to enteric and lower respiratory infections, malaria, HIV/AIDS, neonatal disorders, tuberculosis, and measles. INTERPRETATION Long-standing gains in life expectancy and reductions in many of the leading causes of death have been disrupted by the COVID-19 pandemic, the adverse effects of which were spread unevenly among populations. Despite the pandemic, there has been continued progress in combatting several notable causes of death, leading to improved global life expectancy over the study period. Each of the seven GBD super-regions showed an overall improvement from 1990 and 2021, obscuring the negative effect in the years of the pandemic. Additionally, our findings regarding regional variation in causes of death driving increases in life expectancy hold clear policy utility. Analyses of shifting mortality trends reveal that several causes, once widespread globally, are now increasingly concentrated geographically. These changes in mortality concentration, alongside further investigation of changing risks, interventions, and relevant policy, present an important opportunity to deepen our understanding of mortality-reduction strategies. Examining patterns in mortality concentration might reveal areas where successful public health interventions have been implemented. Translating these successes to locations where certain causes of death remain entrenched can inform policies that work to improve life expectancy for people everywhere. FUNDING Bill & Melinda Gates Foundation