Analysis of microbiota associated with peri-implantitis using 16S rRNA gene clone library

Background: Peri-implantitis (PI) is an inflammatory disease which leads to the destruction of soft and hard tissues around osseointegrated implants. The subgingival microbiota appears to be responsible for peri-implant lesions and although the complexity of the microbiota has been reported in PI, the microbiota responsible for PI has not been identified. Objective: The purpose of this study was to identify the microbiota in subjects who have PI, clinically healthy implants, and periodontitis-affected teeth using 16S rRNA gene clone library analysis to clarify the microbial differences. Design: Three subjects participated in this study. The conditions around the teeth and implants were evaluated based on clinical and radiographic examinations and diseased implants, clinically healthy implants, and periodontally diseased teeth were selected. Subgingival plaque samples were taken from the deepest pockets using sterile paper points. Prevalence and identity of bacteria was analyzed using a 16S rRNA gene clone library technique. Results: A total of 112 different species were identified from 335 clones sequenced. Among the 112 species, 51 (46%) were uncultivated phylotypes, of which 22 were novel phylotypes. The numbers of bacterial species identified at the sites of PI, periodontitis, and periodontally healthy implants were 77, 57, and 12, respectively. Microbiota in PI mainly included Gram-negative species and the composition was more diverse when compared to that of the healthy implant and periodontitis. The phyla Chloroflexi, Tenericutes, and Synergistetes were only detected at PI sites, as were Parvimonas micra, Peptostreptococcus stomatis, Pseudoramibacter alactolyticus, and Solobacterium moorei. Low levels of periodontopathic bacteria, such as Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans, were seen in peri-implant lesions. Conclusions: The biofilm in PI showed a more complex microbiota when compared to periodontitis and periodontally healthy teeth, and it was mainly composed of Gram-negative anaerobic bacteria. Common periodontopathic bacteria showed low prevalence, and several bacteria were identified as candidate pathogens in PI

Incorporation of Y2O3 Particles into 410L Stainless Steel by a Powder Metallurgy Route

Addition of yttria to steels has been proposed for the fabrication of oxide-dispersion-strengthened materials for nuclear power applications. We have investigated materials prepared from 12 Cr martensitic stainless steel, AISI 410L, produced by powder metallurgy. Materials were produced with and without yttria addition, and two different sizes of yttria were used, 0.9 µm and 50 nm. Tensile and mini-creep tests were performed to determine mechanical properties. Optical microscopy, SEM, TEM, and EDX analysis were used to investigate the microstructures and deformation mechanisms and to obtain information about non-metallic inclusion particles. SiO2, MnS, and Y2Si2O7 inclusion particles were observed. An SiO2 and Y2O3 interaction was seen to have occurred during the ball milling, which impaired the final mechanical properties. Small-angle neutron scattering experiments showed that the matrix chemistry prevented effective dissolution of the yttria. © The Author(s) 201

The prognostic influence of tumour-infiltrating lymphocytes in cancer: a systematic review with meta-analysis

Background:Tumour-infiltrating lymphocytes (TILs) are often found in tumours, presumably reflecting an immune response against the tumour. We carried out a systematic review and meta-analysis, aiming to establish pooled estimates for survival outcomes based on the presence of TILs in cancer.Methods:A Pubmed and Embase literature search was designed. Studies were included, in which the prognostic significance of intratumoural CD3+, CD4+, CD8+, and FoxP3+ lymphocytes, as well as ratios between these subsets, were determined in solid tumours.Results:In pooled analysis, CD3+ TILs had a positive effect on survival with a hazard ratio (HR) of 0.58 (95% confidence interval (CI) 0.43-0.78) for death, as did CD8+ TILs with a HR of 0.71 (95% CI 0.62-0.82). FoxP3+ regulatory TILs were not linked to overall survival, with a HR of 1.19 (95% CI 0.84-1.67). The CD8/FoxP3 ratio produced a more impressive HR (risk of death: HR 0.48, 95% CI 0.34-0.68), but was used in relatively few studies. Sample size and follow-up time seemed to influence study outcomes.Conclusion:Any future studies should be carefully designed, to prevent overestimating the effect of TILs on prognosis. In this context, ratios between TIL subsets may be more informative.British Journal of Cancer advance online publication, 31 May 2011; doi:10.1038/bjc.2011.189 www.bjcancer.com

Translating it into real life: a qualitative study of the cognitions, barriers and supports for key obesogenic behaviors of parents of preschoolers

BACKGROUND: Little is known about preschool parents' cognitions, barriers, supports and modeling of key obesogenic behaviors, including breakfast, fruit and vegetable consumption, sugary beverage intake, feeding practices, portion sizes, active playtime, reduced screen-time, sleep and selection of child-care centers with characteristics that promote healthy behaviors. METHODS: Thus, the purpose of this study was to examine these factors via survey and focus groups among 139 parents of 2- to 5-year-old children. Standard content analysis procedures were used to identify trends and themes in the focus group data, and Analysis of Variance was used to test for differences between groups in the survey data. RESULTS: Results showed 80% of parents ate breakfast daily, consumed sugary beverages 2.7 ± 2.5SD days per week, and had at least two different vegetables and fruits an average of 5.2 ± 1.8SD and 4.6 ± 2.0SD days per week. Older parents and those with greater education drank significantly fewer sugary drinks. Parents played actively a mean 4.2 ± 2.2 hours/week with their preschoolers, who watched television a mean 2.4 ± 1.7 hours/day. Many parents reported having a bedtime routine for their preschooler and choosing childcare centers that replaced screen-time with active play and nutrition education. Common barriers to choosing healthful behaviors included lack of time; neighborhood safety; limited knowledge of portion size, cooking methods, and ways to prepare healthy foods or play active indoor games; the perceived cost of healthy options, and family members who were picky eaters. Supports for performing healthful behaviors included planning ahead, introducing new foods and behaviors often and in tandem with existing preferred foods and behaviors, and learning strategies from other parents. CONCLUSIONS: Future education programs with preschool parents should emphasize supports and encourage parents to share helpful strategies with each other.This item is part of the UA Faculty Publications collection. For more information this item or other items in the UA Campus Repository, contact the University of Arizona Libraries at [email protected]

Residual stress distributions in a P91 steel-pipe girth weld before and after post weld heat treatment

In this study the residual stresses in a pipe girth weld in a ferritic-martensitic power plant steel were measured by neutron diffraction and compared with the corresponding metallurgical zones in the weld region. It was found that, in both the as-welded and post-weld heat treated condition, the highest tensile stresses resided near the outer boundary of the heat-affected zone (HAZ), and towards the weld root region. Substantial tensile direct and hydrostatic stresses existed across the HAZ, including the fine-grained and intercritically annealed regions, where premature type IV creep failures manifest in 9–12 Cr steel welds. Compressive stresses were found in the weld metal coinciding with the last weld bead to be deposited. Constrained cooling tests on test coupons illustrated that these compressive stresses can be explained in terms of the influence that solid-state phase transformations have on the accumulation of stress in welds. (C) 2011 Elsevier B.V. All rights reserved

Treatment of ligature-induced peri-implantitis by lethal photosensitization and guided bone regeneration: A preliminary histologic study in dogs

Background: The purpose of this pilot study was to evaluate the healing potential and reosseointegration in ligature-induced peri-implantitis defects adjacent to various dental implant surfaces following lethal photosensitization. Methods: A total of 36 dental implants with 4 different surface coatings (9 commercially pure titanium surface [CPTi]; 9 titanium plasma-sprayed [TPS]; 9 hydroxyapatite [HA]; and 9 acid-etched [AE]) were inserted in 6 male mongrel dogs 3 months after extraction of mandibular premolars. After a 2-month period of ligature-induced peri-implantitis and 12 months of natural peri-implantitis progression, only 19 dental implants remained. The dogs underwent surgical debridement of the remaining dental implant sites and lethal photosensitization by combination of toluidine blue O (100 mug/ml) and irradiation with diode laser. All exposed dental implant surfaces and bone craters were meticulously cleaned by mechanical means, submitted to photodynamic therapy, and guided bone regeneration (GBR) using expanded polytetrafluoroethylene (ePTFE) membranes. Five months later, biopsies of the implant sites were dissected and prepared for ground sectioning and analysis. Results: The percentage of bone fill was HA: 48.28 +/- 15.00; TPS: 39.54 +/- 12.34; AE: 26.88 +/- 22.16; and CPTi: 26.70 +/- 16.50. The percentage of reosseointegration was TPS: 25.25 +/- 11.96; CPTi: 24.91 +/- 17.78; AE: 17.30 +/- 15.41; and HA: 15.83 +/- 9.64. Conclusion: These data suggest that lethal photosensitization may have potential in the treatment of peri-implantitis.74333834