134 research outputs found
Particle filter-based estimation of instantaneous frequency for the diagnosis of electrical asymmetries in induction machines
"© 2014 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.” Upon publication, authors are asked to include either a link to the abstract of the published article in IEEE Xplore®, or the article’s Digital Object Identifier (DOI).Fault diagnosis of induction machines operating
under variable load conditions is still an unsolved matter.
Under those regimes, the application of conventional diagnostic
techniques is not suitable, since they are adapted to the analysis
of stationary quantities. In this context, modern transient-based
methodologies become very appropriate. This paper improves a
technique, based on the application of Wigner Ville distribution
as time frequency decomposition tool, using a particle filtering
method as feature extraction procedure, to diagnose and quantify
electrical asymmetries in induction machines, such as wound-
rotor induction generators used in wind farms. The combination
of both tools allows tracking several variable frequency harmon-
ics simultaneously and computing their energy with high accu-
racy, yielding magnitudes and values similar to those obtained
by the application of the fast Fourier transform in stationary
operation. The experimental results show the validity of the
approach for rapid speed variations, independently of any speed
sensor.Climente Alarcon, V.; Antonino Daviu, JA.; Haavisto, A.; Arkkio, A. (2014). Particle Filter-Based Estimation of Instantaneous Frequency for the Diagnosis of Electrical Asymmetries in Induction Machines. IEEE Transactions on Instrumentation and Measurement. 63(10):2454-2463. doi:10.1109/TIM.2014.231011324542463631
Induction motor diagnosis by advanced notch FIR filters and the wigner-ville distribution
During the last years, several time-frequency decomposition tools have been applied for the diagnosis of induction motors, for those cases in which the traditional procedures, such as motor current signature analysis, cannot yield the necessary response. Among them, the Cohen distributions have been widely selected to study transient and even stationary operation due to their high-resolution and detailed information provided at all frequencies. Their main drawback, the cross-terms, has been tackled either modifying the distribution, or carrying out a pretreatment of the signal before computing its time-frequency decomposition. In this paper, a filtering process is proposed that uses advanced notch filters in order to remove constant frequency components present in the current of an induction motor, prior to the computation of its distribution, to study rotor asymmetries and mixed eccentricities. In transient operation of machines directly connected to the grid, this procedure effectively eliminates most of the artifacts that have prevented the use of these tools, allowing a wideband analysis and the definition of a precise quantification parameter able to follow the evolution of their state. © 1982-2012 IEEE
Advanced Analysis of Motor Currents for the Diagnosis of the Rotor Condition in Electric Motors Operating in Mining Facilities
© 1972-2012 IEEE. Predictive maintenance of electric motors is a topic of increasing importance in many industrial applications. The mining industry is not an exception; many electric motors operating in mining facilities are critical machines, and their unexpected failures may imply significant losses and can be hazardous for the users. Due to these facts, an increasing research effort has been dedicated to investigate new techniques that are able to provide a reliable diagnostic of the motor condition. Over recent years, monitoring of electrical quantities (e.g., motor currents) has emerged as a very attractive option for determining the health of several motor parts (rotor, eccentricities, bearings) due to its very interesting advantages: possibility of remote motor monitoring, noninvasive nature, simple application, broad fault coverage, etc. The traditional methods based on the analysis of motor currents during a steady-state operation [motor current signature analysis (MCSA)] are being complemented when not replaced by more reliable approaches. This paper applies an innovative transient-based methodology to several case studies referred to large motors operating in mining facilities. The results prove how this modern methodology enables us to overcome some important drawbacks of the classical MCSA, such as its unsuitability under varying speed conditions, and may provide an earlier indication of rotor electrical asymmetries under such working conditions
Application of the Wigner-Ville distribution for the detection of rotor asymmetries and eccentricity through high-order harmonics
The diagnosis of induction machines through the use of methods based on the study of the startup current has become an issue of special interest. These techniques may provide, in certain situations (unbalanced supply voltages, load torque oscillations, variable load, etc.) and for certain faults (broken bars, eccentricity, stator short circuit, etc.) substantial advantages in comparison with the classical method, based on the Fourier spectrum of the steady-state current. Nevertheless, in the case of rotor asymmetries, these transient-based techniques have been mainly focused on the tracing of the lower sideband harmonic (LSH). In this paper, a wideband diagnosis method is proposed, in which the Wigner-Ville distribution is applied to the detection of eccentricity and other high-order components also introduced by the rotor asymmetry. It is shown that the proposed wide band analysis might help to reach a more reliable diagnosis conclusion in cases in which the tracing of commonly used harmonics may be difficult (inter-bar currents, load torque oscillations, non stationary regimes, etc.). An evaluation of the method is carried out through simulations and laboratory tests. The results show the potential of the tool for the detection and quantification of these components as a basis to diagnose such faults. © 2012 Elsevier B.V
Evaluation of the Detectability of Electromechanical Faults in Induction Motors Via Transient Analysis of the Stray Flux
© 1972-2012 IEEE. The stray flux that is present in the vicinity of an induction motor is a very interesting information source to detect several types of failures in these machines. The analysis of this quantity can be employed, in some cases, as a supportive tool to complement the diagnosis provided by other quantities. In other cases, when no other motor quantities are available, stray flux analysis can become one of the few alternatives to evaluate the motor condition. Its noninvasive nature, low cost, and easy implementation makes it a very interesting option that requires further investigation. The aim of this work is to evaluate the suitability of the stray flux analysis under the starting transient as a way to detect certain faults in induction motors (broken rotor bars and misalignments), even when these types of faults coexist in the motor. To this end, advanced signal processing tools will be applied. Several positions of the flux sensors are considered in this study. Also, for the first time, a fault indicator based on the stray flux analysis under the starting is introduced and its sensitivity is compared versus other indicators relying on other quantities. It must be emphasized that, since the capture of the transient and steady-state flux signals can be carried out in the same measurement, the application of the approach presented in this work is straightforward and its derived information may become crucial for the diagnosis of some faults.Ministerio de Economía y Competitividad’ (MINECO) and FEDER program in the framework of the ‘Proyectos I+D del Subprograma de Generación de Conocimiento, Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia’ (ref: DPI2014-52842-P)
Diagnosis of Induction Motors Under Varying Speed Operation by Principal Slot Harmonic Tracking
© 1972-2012 IEEE. A detailed study on the energy content of a principal slot harmonic (PSH) in an induction motor operating at variable slip is carried out. The machine is tested under different faulty conditions, namely, broken rotor bar, mixed eccentricity, and interturn short circuit. The use of a combined time-frequency analysis and particle filtering feature extraction procedure allows tracking the evolution of a PSH under different load profiles and integrating its energy. The proposed fault indicator provides values that are equivalent with the traditional one for stationary operation even in the case of pulsating load. The results show that the energy in the PSH reflects the overall state of the machine under these conditions. Furthermore, procedures to discern the different faults in real applications are proposed
Rotor-bar breakage mechanism and prognosis in an induction motor
© 1982-2012 IEEE. This paper proposes a condition-based maintenance and prognostics and health management (CBM/PHM) procedure for a rotor bar in an induction motor. The methodology is based on the results of a fatigue test intended to reproduce in the most natural way a bar breakage in order to carry out a comparison between transient and stationary diagnosis methods for incipient fault detection. Newly developed techniques in stator-current transient analysis have allowed tracking the developing fault during the last part of the test, identifying the failure mechanism, and establishing a physical model of the process. This nonlinear failure model is integrated in a particle filtering algorithm to diagnose the defect at an early stage and predict the remaining useful life of the bar. An initial generalization of the results to conditions differing from the ones under which the fatigue test was developed is studied
Combined Model for Simulating the Effect of Transients on a Damaged Rotor Cage
© 2017 IEEE. The expansion of the transient operation of electrical machines as, for instance, in vehicle traction applications, demands an accurate computation of the thermal behavior under these conditions in order to enhance the economy of the design and provide a precise estimation of the overload capacity. In addition, heavy transients have been identified as specially damaging for the rotor cage of large induction motors. The aim of this paper is the development of a model able to simulate in detail the thermal and mechanical effects of a heavy transient on an induction's motor rotor featuring a damaged (with a reduced section on one of its ends) rotor bar. Some preliminary results that provide a qualitative understanding of the development of a bar breakage during a fatigue test are presented
Hilbert-Huang transform with adaptive waveform matching extension and its application in power quality disturbance detection for microgrid
Chiral Modulations in Curved Space I: Formalism
The goal of this paper is to present a formalism that allows to handle
four-fermion effective theories at finite temperature and density in curved
space. The formalism is based on the use of the effective action and zeta
function regularization, supports the inclusion of inhomogeneous and
anisotropic phases. One of the key points of the method is the use of a
non-perturbative ansatz for the heat-kernel that returns the effective action
in partially resummed form, providing a way to go beyond the approximations
based on the Ginzburg-Landau expansion for the partition function. The
effective action for the case of ultra-static Riemannian spacetimes with
compact spatial section is discussed in general and a series representation,
valid when the chemical potential satisfies a certain constraint, is derived.
To see the formalism at work, we consider the case of static Einstein spaces at
zero chemical potential. Although in this case we expect inhomogeneous phases
to occur only as meta-stable states, the problem is complex enough and allows
to illustrate how to implement numerical studies of inhomogeneous phases in
curved space. Finally, we extend the formalism to include arbitrary chemical
potentials and obtain the analytical continuation of the effective action in
curved space.Comment: 22 pages, 3 figures; version to appear in JHE
- …