On the thermal stability of transonic accretion discs

Nonlinear time-dependent calculations have been carried out in order to study the evolution of the thermal instability for optically thick, transonic, slim accretion discs around black holes. In the present calculations we have investigated only the original version of the slim disc model with low viscosity. This version does not yet contain several important non-local effects but our aim is to use it as a standard reference against which to compare the results from forthcoming studies in which additional effects will be added one by one thus giving a systematic way of understanding the contribution from each of them. A range of results for different cases is presented showing a number of interesting features. One preliminary conclusion is that the stabilizing effect of advection seems not to be strong enough in these low viscosity models to allow for limit cycle behaviour to occur.Comment: 23 pages, Latex, 11 Postscript figures, accepted by MNRA

EVAPORATION OF QUARK DROPS DURING THE COSMOLOGICAL Q-H TRANSITION

We have carried out a study of the hydrodynamics of disconnected quark regions during the final stages of the cosmological quark-hadron transition. A set of relativistic Lagrangian equations is presented for following the evaporation of a single quark drop and results from the numerical solution of this are discussed. A self-similar solution is shown to exist and the formation of baryon number density inhomogeneities at the end of the drop contraction is discussed.Comment: 12 pages Phys. Rev. format, uuencoded postscript file including 12 figure

Application of the Monopole Source to Quantify Explosive Flux During Vulcanian Explosions at Sakurajima Volcano (Japan)

A primary goal in volcano seismology is to characterize source motions internal to a volcano in terms of their representative forces. In a similar manner, much volcano infrasound research strives to recover eruptive force time histories corresponding to material accelerations occurring at Earth’s free surface. These motions may correspond to explosive emission of gas and pyroclasts (e.g., Banister, 1984), rapid ground distensions of a volcanic dome (e.g., Johnson and Lees, 2010), and/or gravity driven rock fall or pyroclastic flows (e.g., Yamasato, 1997). When free surface motion is unsteady it imposes stresses upon the surrounding atmosphere, which are propagated as acoustic airwaves. Typically, the sounds produced by volcanic phenomena are recorded with low-frequency infrasound sensitive microphones. The intervening atmosphere is relatively homogeneous and nonattenuating for infrasound propagation of a few kilometers, therefore the recorded excess pressures closely represent volcano source time functions. Such force time histories are equivalent to volumetric accelerations of the atmosphere at or near to the source

Computational Stylometry: An Interdisciplinary Project

This project was an analysis of a writers word usage and writing tendencies which, allows a person to recognize a piece of work with out knowing who wrote it and make a reasonable guess about whose work it is

Intrinsic decoherence and classical-quantum correspondence in two coupled delta-kicked rotors

We show that classical-quantum correspondence of center of mass motion in two coupled delta-kicked rotors can be obtained from intrinsic decoherence of the system itself which occurs due to the entanglement of the center of mass motion to the internal degree of freedom without coupling to external environment

Oil recovery from naturally fractured reservoirs by steam injection methods. Final report

Oil recovery by steam injection is a proven, successful technology for nonfractured reservoirs, but has received only limited study for fractured reservoirs. Preliminary studies suggest recovery efficiencies in fractured reservoirs may be increased by as much as 50% with the application of steam relative to that of low temperature processes. The key mechanisms enhancing oil production at high temperature are the differential thermal expansion between oil and the pore volume, and the generation of gases within matrix blocks. Other mechanisms may also contribute to increased production. These mechanisms are relatively independent of oil gravity, making steam injection into naturally fractured reservoirs equally attractive to light and heavy oil deposits. The objectives of this research program are to quantify the amount of oil expelled by these recovery mechanisms and to develop a numerical model for predicting oil recovery in naturally fractured reservoirs during steam injection. The experimental study consists of constructing and operating several apparatuses to isolate each of these mechanisms. The first measures thermal expansion and capillary imbibition rates at relatively low temperature, but for various lithologies and matrix block shapes. The second apparatus measures the same parameters, but at high temperatures and for only one shape. A third experimental apparatus measures the maximum gas saturations that could build up within a matrix block. A fourth apparatus measures thermal conductivity and diffusivity of porous media. The numerical study consists of developing transfer functions for oil expulsion from matrix blocks to fractures at high temperatures and incorporating them, along with the energy equation, into a dual porosity thermal reservoir simulator. This simulator can be utilized to make predictions for steam injection processes in naturally-fractured reservoirs. Analytical models for capillary imbibition have also been developed

Oil recovery from naturally fractured reservoirs by steam injection methods. Final report

Oil recovery by steam injection is a proven, successful technology for nonfractured reservoirs, but has received only limited study for fractured reservoirs. Preliminary studies suggest recovery efficiencies in fractured reservoirs may be increased by as much as 50% with the application of steam relative to that of low temperature processes. The key mechanisms enhancing oil production at high temperature are the differential thermal expansion between oil and the pore volume, and the generation of gases within matrix blocks. Other mechanisms may also contribute to increased production. These mechanisms are relatively independent of oil gravity, making steam injection into naturally fractured reservoirs equally attractive to light and heavy oil deposits. The objectives of this research program are to quantify the amount of oil expelled by these recovery mechanisms and to develop a numerical model for predicting oil recovery in naturally fractured reservoirs during steam injection. The experimental study consists of constructing and operating several apparatuses to isolate each of these mechanisms. The first measures thermal expansion and capillary imbibition rates at relatively low temperature, but for various lithologies and matrix block shapes. The second apparatus measures the same parameters, but at high temperatures and for only one shape. A third experimental apparatus measures the maximum gas saturations that could build up within a matrix block. A fourth apparatus measures thermal conductivity and diffusivity of porous media. The numerical study consists of developing transfer functions for oil expulsion from matrix blocks to fractures at high temperatures and incorporating them, along with the energy equation, into a dual porosity thermal reservoir simulator. This simulator can be utilized to make predictions for steam injection processes in naturally-fractured reservoirs. Analytical models for capillary imbibition have also been developed

Validation of Ultrahigh Dependability for Software-Based Systems

Modern society depends on computers for a number of critical tasks in which failure can have very high costs. As a consequence, high levels of dependability (reliability, safety, etc.) are required from such computers, including their software. Whenever a quantitative approach to risk is adopted, these requirements must be stated in quantitative terms, and a rigorous demonstration of their being attained is necessary. For software used in the most critical roles, such demonstrations are not usually supplied. The fact is that the dependability requirements often lie near the limit of the current state of the art, or beyond, in terms not only of the ability to satisfy them, but also, and more often, of the ability to demonstrate that they are satisfied in the individual operational products (validation). We discuss reasons why such demonstrations cannot usually be provided with the means available: reliability growth models, testing with stable reliability, structural dependability modelling, as well as more informal arguments based on good engineering practice. We state some rigorous arguments about the limits of what can be validated with each of such means. Combining evidence from these different sources would seem to raise the levels that can be validated; yet this improvement is not such as to solve the problem. It appears that engineering practice must take into account the fact that no solution exists, at present, for the validation of ultra-high dependability in systems relying on complex software

Analysis of the complement sensitivity of oral treponemes and the potential influence of FH binding, FH cleavage and dentilisin activity on the pathogenesis of periodontal disease

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/108655/1/omi12054.pd