492 research outputs found

    Preparation of Ni–YSZ thin and thick films on metallic interconnects as cell supports. Applications as anode for SOFC

    Get PDF
    In this work, we propose the preparation of a duplex anodic layer composed of both a thin (100 nm) and a thick film (10 lm) with Ni–YSZ material. The support of this anode is a metallic substrate, which is the interconnect of the SOFC unit cell. The metallic support limits the temperature of thermal treatment at 800 C to keep a good interconnect mechanical behaviour and to reduce corrosion. We have chosen to elaborate anodic coatings by sol–gel route coupled with dip-coating process, which are low cost techniques and allow working with moderate temperatures. Thin films are obtained by dipping interconnect substrate into a sol, and thick films into an optimized slurry. After thermal treatment at only 800 C, anodic coatings are adherent and homogeneous. Thin films have compact microstructures that confer ceramic protective barrier on metal surface. Further coatings of 10 lm thick are porous and constitute the active anodic material

    Investigation of Graded La2NiO4+ Cathodes to Improve SOFC Electrochemical Performance

    Get PDF
    Mixed ionic and electronic conducting MIEC oxides are promising materials for use as cathodes in solid oxide fuel cells SOFCs due to their enhanced electrocatalytic activity compared with electronic conducting oxides. In this paper, the MIEC oxide La2NiO4+ was prepared by the sol-gel route. Graded cathodes were deposited onto yttria-stabilized zirconia YSZ pellets by dip-coating, and electrochemical impedance spectroscopy studies were performed to characterize the symmetrical cell performance. By adapting the slurries, cathode layers with different porosities and thicknesses were obtained. A ceria gadolinium oxide CGO barrier layer was introduced, avoiding insulating La2Zr2O7 phase formation and thus reducing resistance polarization of the cathode. A systematic correlation between microstructure, composition, and electrochemical performance of these cathodes has been performed. An improvement of the electrochemical performance has been demonstrated, and a reduction in the area specific resistance ASR by a factor of 4.5 has been achieved with a compact interlayer of La2NiO4+ between the dense electrolyte and the porous La2NiO4+ cathode layer. The lowest observed ASR of 0.11 cm2 at 800°C was obtained from a symmetrical cell composed of a YSZ electrolyte, a CGO interlayer, an intermediate compact La2NiO4+ layer, a porous La2NiO4+ electrode layer, and a current collection layer of platinum paste

    Viscous stabilization of 2D drainage displacements with trapping

    Full text link
    We investigate the stabilization mechanisms due to viscous forces in the invasion front during drainage displacement in two-dimensional porous media using a network simulator. We find that in horizontal displacement the capillary pressure difference between two different points along the front varies almost linearly as function of height separation in the direction of the displacement. The numerical result supports arguments taking into account the loopless displacement pattern where nonwetting fluid flow in separate strands (paths). As a consequence, we show that existing theories developed for viscous stabilization, are not compatible with drainage when loopless strands dominate the displacement process.Comment: The manuscript has been substantially revised. Accepted in Phys. Rev. Let

    Immigrant community integration in world cities

    Full text link
    As a consequence of the accelerated globalization process, today major cities all over the world are characterized by an increasing multiculturalism. The integration of immigrant communities may be affected by social polarization and spatial segregation. How are these dynamics evolving over time? To what extent the different policies launched to tackle these problems are working? These are critical questions traditionally addressed by studies based on surveys and census data. Such sources are safe to avoid spurious biases, but the data collection becomes an intensive and rather expensive work. Here, we conduct a comprehensive study on immigrant integration in 53 world cities by introducing an innovative approach: an analysis of the spatio-temporal communication patterns of immigrant and local communities based on language detection in Twitter and on novel metrics of spatial integration. We quantify the "Power of Integration" of cities --their capacity to spatially integrate diverse cultures-- and characterize the relations between different cultures when acting as hosts or immigrants.Comment: 13 pages, 5 figures + Appendi

    Simulating temporal evolution of pressure in two-phase flow in porous media

    Get PDF
    We have simulated the temporal evolution of pressure due to capillary and viscous forces in two-phase drainage in porous media. We analyze our result in light of macroscopic flow equations for two-phase flow. We also investigate the effect of the trapped clusters on the pressure evolution and on the effective permeability of the system. We find that the capillary forces play an important role during the displacements for both fast and slow injection rates and both when the invading fluid is more or less viscous than the defending fluid. The simulations are based on a network simulator modeling two-phase drainage displacements on a two-dimensional lattice of tubes.Comment: 12 pages, LaTeX, 14 figures, Postscrip

    Finite-size effects for anisotropic bootstrap percolation: logarithmic corrections

    Get PDF
    In this note we analyze an anisotropic, two-dimensional bootstrap percolation model introduced by Gravner and Griffeath. We present upper and lower bounds on the finite-size effects. We discuss the similarities with the semi-oriented model introduced by Duarte.Comment: Key words: Bootstrap percolation, anisotropy, finite-size effect

    Pattern Formation in Interface Depinning and Other Models: Erratically Moving Spatial Structures

    Full text link
    We study erratically moving spatial structures that are found in a driven interface in a random medium at the depinning threshold. We introduce a bond-disordered variant of the Sneppen model and study the effect of extremal dynamics on the morphology of the interface. We find evidence for the formation of a structure which moves along with the growth site. The time average of the structure, which is defined with respect to the active spot of growth, defines an activity-centered pattern. Extensive Monte Carlo simulations show that the pattern has a tail which decays slowly, as a power law. To understand this sort of pattern formation, we write down an approximate integral equation involving the local interface dynamics and long-ranged jumps of the growth spot. We clarify the nature of the approximation by considering a model for which the integral equation is exactly derivable from an extended master equation. Improvements to the equation are considered by adding a second coupled equation which provides a self-consistent description. The pattern, which defines a one-point correlation function, is shown to have a strong effect on ordinary space-fixed two-point correlation functions. Finally we present evidence that this sort of pattern formation is not confined to the interface problem, but is generic to situations in which the activity at succesive time steps is correlated, as for instance in several other extremal models. We present numerical results for activity-centered patterns in the Bak-Sneppen model of evolution and the Zaitsev model of low-temperature creep.Comment: RevTeX, 18 pages, 19 eps-figures, To appear in Phys. Rev.

    Collective Particle Flow through Random Media

    Full text link
    A simple model for the nonlinear collective transport of interacting particles in a random medium with strong disorder is introduced and analyzed. A finite threshold for the driving force divides the behavior into two regimes characterized by the presence or absence of a steady-state particle current. Below this threshold, transient motion is found in response to an increase in the force, while above threshold the flow approaches a steady state with motion only on a network of channels which is sparse near threshold. Some of the critical behavior near threshold is analyzed via mean field theory, and analytic results on the statistics of the moving phase are derived. Many of the results should apply, at least qualitatively, to the motion of magnetic bubble arrays and to the driven motion of vortices in thin film superconductors when the randomness is strong enough to destroy the tendencies to lattice order even on short length scales. Various history dependent phenomena are also discussed.Comment: 63 preprint pages plus 6 figures. Submitted to Phys Rev

    Dynamics of Wetting Fronts in Porous Media

    Full text link
    We propose a new phenomenological approach for describing the dynamics of wetting front propagation in porous media. Unlike traditional models, the proposed approach is based on dynamic nature of the relation between capillary pressure and medium saturation. We choose a modified phase-field model of solidification as a particular case of such dynamic relation. We show that in the traveling wave regime the results obtained from our approach reproduce those derived from the standard model of flow in porous media. In more general case, the proposed approach reveals the dependence of front dynamics upon the flow regime.Comment: 4 pages, 2 figures, revte
    • …
    corecore