114 research outputs found
Recommended from our members
Modeling Spatial Patterns of Traffic-Related Air Pollutants in Complex Urban Terrain
Background: The relationship between traffic emissions and mobile-source air pollutant concentrations is highly variable over space and time and therefore difficult to model accurately, especially in urban settings with complex terrain. Regression-based approaches using continuous real-time mobile measurements may be able to characterize spatiotemporal variability in traffic-related pollutant concentrations but require methods to incorporate temporally varying meteorology and source strength in a physically interpretable fashion. Objective: We developed a statistical model to assess the joint impact of both meteorology and traffic on measured concentrations of mobile-source air pollutants over space and time. Methods: In this study, traffic-related air pollutants were continuously measured in the Williamsburg neighborhood of Brooklyn, New York (USA), which is affected by traffic on a large bridge and major highway. One-minute average concentrations of ultrafine particulate matter (UFP), fine particulate matter [ in aerodynamic diameter ], and particle-bound polycyclic aromatic hydrocarbons were measured using a mobile-monitoring protocol. Regression modeling approaches to quantify the influence of meteorology, traffic volume, and proximity to major roadways on pollutant concentrations were used. These models incorporated techniques to capture spatial variability, long- and short-term temporal trends, and multiple sources. Results: We observed spatial heterogeneity of both UFP and concentrations. A variety of statistical methods consistently found a 15–20% decrease in UFP concentrations within the first 100 m from each of the two major roadways. For , temporal variability dominated spatial variability, but we observed a consistent linear decrease in concentrations from the roadways. Conclusions: The combination of mobile monitoring and regression analysis was able to quantify local source contributions relative to background while accounting for physically interpretable parameters. Our results provide insight into urban exposure gradients
Cytokinin response factor 6 represses cytokinin-associated genes during oxidative stress
Cytokinin is a phytohormone that is well known for its roles in numerous plant growth and developmental processes, yet it has also been linked to abiotic stress response in a less defined manner. Arabidopsis (Arabidopsis thaliana) Cytokinin Response Factor 6 (CRF6) is a cytokinin-responsive AP2/ERF-family transcription factor that, through the cytokinin signaling pathway, plays a key role in the inhibition of dark-induced senescence. CRF6 expression is also induced by oxidative stress, and here we show a novel function for CRF6 in relation to oxidative stress and identify downstream transcriptional targets of CRF6 that are repressed in response to oxidative stress. Analysis of transcriptomic changes in wild-type and crf6 mutant plants treated with H2O2 identified CRF6-dependent differentially expressed transcripts, many of which were repressed rather than induced. Moreover, many repressed genes also show decreased expression in 35S:CRF6 overexpressing plants. Together, these findings suggest that CRF6 functions largely as a transcriptional repressor. Interestingly, among the H2O2 repressed CRF6-dependent transcripts was a set of five genes associated with cytokinin processes: (signaling) ARR6, ARR9, ARR11, (biosynthesis) LOG7, and (transport) ABCG14. We have examined mutants of these cytokinin-associated target genes to reveal novel connections to oxidative stress. Further examination of CRF6-DNA interactions indicated that CRF6 may regulate its targets both directly and indirectly. Together, this shows that CRF6 functions during oxidative stress as a negative regulator to control this cytokinin-associated module of CRF6-dependent genes and establishes a novel connection between cytokinin and oxidative stress response
An Expert System-Driven Method for Parametric Trajectory Optimization During Conceptual Design
During the early phases of engineering design, the costs committed are high, costs incurred are low, and the design freedom is high. It is well documented that decisions made in these early design phases drive the entire design's life cycle cost. In a traditional paradigm, key design decisions are made when little is known about the design. As the design matures, design changes become more difficult in both cost and schedule to enact. The current capability-based paradigm, which has emerged because of the constrained economic environment, calls for the infusion of knowledge usually acquired during later design phases into earlier design phases, i.e. bringing knowledge acquired during preliminary and detailed design into pre-conceptual and conceptual design. An area of critical importance to launch vehicle design is the optimization of its ascent trajectory, as the optimal trajectory will be able to take full advantage of the launch vehicle's capability to deliver a maximum amount of payload into orbit. Hence, the optimal ascent trajectory plays an important role in the vehicle's affordability posture yet little of the information required to successfully optimize a trajectory is known early in the design phase. Thus, the current paradigm of optimizing ascent trajectories involves generating point solutions for every change in a vehicle's design parameters. This is often a very tedious, manual, and time-consuming task for the analysts. Moreover, the trajectory design space is highly non-linear and multi-modal due to the interaction of various constraints. When these obstacles are coupled with the Program to Optimize Simulated Trajectories (POST), an industry standard program to optimize ascent trajectories that is difficult to use, expert trajectory analysts are required to effectively optimize a vehicle's ascent trajectory. Over the course of this paper, the authors discuss a methodology developed at NASA Marshall's Advanced Concepts Office to address these issues. The methodology is two-fold: first, capture the heuristics developed by human analysts over their many years of experience; and secondly, leverage the power of modern computing to evaluate multiple trajectories simultaneously and therefore enable the exploration of the trajectory's design space early during the pre- conceptual and conceptual phases of design. This methodology is coupled with design of experiments in order to train surrogate models, which enables trajectory design space visualization and parametric optimal ascent trajectory information to be available when early design decisions are being made
Program to Optimize Simulated Trajectories II (POST2) Surrogate Models for Mars Ascent Vehicle (MAV) Performance Assessment
The primary purpose of the multiPOST tool is to enable the execution of much larger sets of vehicle cases to allow for broader trade space exploration. However, this exploration is not achieved solely with the increased case throughput. The multiPOST tool is applied to carry out a Design of Experiments (DOE), which is a set of cases that have been structured to capture a maximum amount of information about the design space with minimal computational effort. The results of the DOE are then used to fit a surrogate model, ultimately enabling parametric design space exploration. The approach used for the MAV study includes both DOE and surrogate modeling. First, the primary design considerations for the vehicle were used to develop the variables and ranges for the multiPOST DOE. The final set of DOE variables were carefully selected in order to capture the desired vehicle trades and take into account any special considerations for surrogate modeling. Next, the DOE sets were executed through multiPOST. Following successful completion of the DOE cases, a manual verification trial was performed. The trial involved randomly selecting cases from the DOE set and running them by hand. The results from the human analyst's run and multiPOST were then compared to ensure that the automated runs were being executed properly. Completion of the verification trials was then followed by surrogate model fitting. After fits to the multiPOST data were successfully created, the surrogate models were used as a stand-in for POST2 to carry out the desired MAV trades. Using the surrogate models in lieu of POST2 allowed for visualization of vehicle sensitivities to the input variables as well as rapid evaluation of vehicle performance. Although the models introduce some error into the output of the trade study, they were very effective at identifying areas of interest within the trade space for further refinement by human analysts. The next section will cover all of the ground rules and assumptions associated with DOE setup and multiPOST execution. Section 3.1 gives the final DOE variables and ranges, while section 3.2 addresses the POST2 specific assumptions. The results of the verification trials are given in section 4. Section 5 gives the surrogate model fitting results, including the goodness-of-fit metrics for each fit. Finally, the MAV specific results are discussed in section 6
Engineering bacteria to solve the Burnt Pancake Problem
<p>Abstract</p> <p>Background</p> <p>We investigated the possibility of executing DNA-based computation in living cells by engineering <it>Escherichia coli </it>to address a classic mathematical puzzle called the Burnt Pancake Problem (BPP). The BPP is solved by sorting a stack of distinct objects (pancakes) into proper order and orientation using the minimum number of manipulations. Each manipulation reverses the order and orientation of one or more adjacent objects in the stack. We have designed a system that uses site-specific DNA recombination to mediate inversions of genetic elements that represent pancakes within plasmid DNA.</p> <p>Results</p> <p>Inversions (or "flips") of the DNA fragment pancakes are driven by the <it>Salmonella typhimurium </it>Hin/<it>hix </it>DNA recombinase system that we reconstituted as a collection of modular genetic elements for use in <it>E. coli</it>. Our system sorts DNA segments by inversions to produce different permutations of a promoter and a tetracycline resistance coding region; <it>E. coli </it>cells become antibiotic resistant when the segments are properly sorted. Hin recombinase can mediate all possible inversion operations on adjacent flippable DNA fragments. Mathematical modeling predicts that the system reaches equilibrium after very few flips, where equal numbers of permutations are randomly sorted and unsorted. Semiquantitative PCR analysis of <it>in vivo </it>flipping suggests that inversion products accumulate on a time scale of hours or days rather than minutes.</p> <p>Conclusion</p> <p>The Hin/<it>hix </it>system is a proof-of-concept demonstration of <it>in vivo </it>computation with the potential to be scaled up to accommodate larger and more challenging problems. Hin/<it>hix </it>may provide a flexible new tool for manipulating transgenic DNA <it>in vivo</it>.</p
Understanding intra-neighborhood patterns in PM2.5 and PM10 using mobile monitoring in Braddock, PA
Physiological, phenometric and productive changes in soybean crop due to the use of kinetin
- …