Assessing the contribution of vegetation to slope stability

Many embankments and cuttings associated with the transportation infrastructure in the UK are only marginally stable. Engineering techniques such as soil nailing, geosynthetic reinforcement, improved drainage and ground improvement by stabilisation are available to improve stability but the cost can be high. A lower cost solution may be to utilise vegetation, either self seeded or planted. The benefits and drawbacks associated with vegetation have been the subject of some debate. The problems caused by vegetation in relation to building foundations are well documented and confirm that vegetation can have very significant influences on geotechnical parameters. Appropriate properly maintained vegetation can have the same significant influence to help provide additional stability to soil slopes. This paper considers the potential engineering influences of vegetation and how it can be characterised on site within a geotechnical framework for stability assessments. The direct reinforcement available from the roots of trees and shrubs is identified as providing one of the most significant contributions to slope stability. Case studies in the UK, Greece and Italy demonstrate how results from in-situ root pull out tests may be used to estimate the potential reinforcement forces available from the roots. A scheme is presented to designate zones of influence within the soil according to the size and nature of the vegetation

Whole-genome sequencing of multidrug-resistant Mycobacterium tuberculosis isolates from Myanmar.

Drug-resistant tuberculosis (TB) is a major health threat in Myanmar. An initial study was conducted to explore the potential utility of whole-genome sequencing (WGS) for the diagnosis and management of drug-resistant TB in Myanmar. Fourteen multidrug-resistant Mycobacterium tuberculosis isolates were sequenced. Known resistance genes for a total of nine antibiotics commonly used in the treatment of drug-susceptible and multidrug-resistant TB (MDR-TB) in Myanmar were interrogated through WGS. All 14 isolates were MDR-TB, consistent with the results of phenotypic drug susceptibility testing (DST), and the Beijing lineage predominated. Based on the results of WGS, 9 of the 14 isolates were potentially resistant to at least one of the drugs used in the standard MDR-TB regimen but for which phenotypic DST is not conducted in Myanmar. This study highlights a need for the introduction of second-line DST as part of routine TB diagnosis in Myanmar as well as new classes of TB drugs to construct effective regimens.Professor Sandy Smith Memorial ScholarshipThis is the final version of the article. It first appeared from Elsevier via https://doi.org/10.1016/j.jgar.2016.04.00

Site investigation for the effects of vegetation on ground stability

The procedure for geotechnical site investigation is well established but little attention is currently given to investigating the potential of vegetation to assist with ground stability. This paper describes how routine investigation procedures may be adapted to consider the effects of the vegetation. It is recommended that the major part of the vegetation investigation is carried out, at relatively low cost, during the preliminary (desk) study phase of the investigation when there is maximum flexibility to take account of findings in the proposed design and construction. The techniques available for investigation of the effects of vegetation are reviewed and references provided for further consideration. As for general geotechnical investigation work, it is important that a balance of effort is maintained in the vegetation investigation between (a) site characterisation (defining and identifying the existing and proposed vegetation to suit the site and ground conditions), (b) testing (in-situ and laboratory testing of the vegetation and root systems to provide design parameters) and (c) modelling (to analyse the vegetation effects)

Global data for ecology and epidemiology: a novel algorithm for temporal Fourier processing MODIS data

Background. Remotely-sensed environmental data from earth-orbiting satellites are increasingly used to model the distribution and abundance of both plant and animal species, especially those of economic or conservation importance. Time series of data from the MODerate-resolution Imaging Spectroradiometer (MODIS) sensors on-board NASA's Terra and Aqua satellites offer the potential to capture environmental thermal and vegetation seasonality, through temporal Fourier analysis, more accurately than was previously possible using the NOAA Advanced Very High Resolution Radiometer (AVHRR) sensor data. MODIS data are composited over 8- or 16-day time intervals that pose unique problems for temporal Fourier analysis. Applying standard techniques to MODIS data can introduce errors of up to 30% in the estimation of the amplitudes and phases of the Fourier harmonics. Methodology/Principal Findings. We present a novel spline-based algorithm that overcomes the processing problems of composited MODIS data. The algorithm is tested on artificial data generated using randomly selected values of both amplitudes and phases, and provides an accurate estimate of the input variables under all conditions. The algorithm was then applied to produce layers that capture the seasonality in MODIS data for the period from 2001 to 2005. Conclusions/Significance. Global temporal Fourier processed images of 1 km MODIS data for Middle Infrared Reflectance, day- and night-time Land Surface Temperature (LST), Normalised Difference Vegetation Index (NDVI), and Enhanced Vegetation Index (EVI) are presented for ecological and epidemiological applications. The finer spatial and temporal resolution, combined with the greater geolocational and spectral accuracy of the MODIS instruments, compared with previous multi-temporal data sets, mean that these data may be used with greater confidence in species' distribution modelling

Using geographically weighted regression to explore the spatially heterogeneous spread of bovine tuberculosis in England and Wales

An understanding of the factors that affect the spread of endemic bovine tuberculosis (bTB) is critical for the development of measures to stop and reverse this spread. Analyses of spatial data need to account for the inherent spatial heterogeneity within the data, or else spatial autocorrelation can lead to an overestimate of the significance of variables. This study used three methods of analysis—least-squares linear regression with a spatial autocorrelation term, geographically weighted regression (GWR) and boosted regression tree (BRT) analysis—to identify the factors that influence the spread of endemic bTB at a local level in England and Wales. The linear regression and GWR methods demonstrated the importance of accounting for spatial differences in risk factors for bTB, and showed some consistency in the identification of certain factors related to flooding, disease history and the presence of multiple genotypes of bTB. This is the first attempt to explore the factors associated with the spread of endemic bTB in England and Wales using GWR. This technique improves on least-squares linear regression approaches by identifying regional differences in the factors associated with bTB spread. However, interpretation of these complex regional differences is difficult and the approach does not lend itself to predictive models which are likely to be of more value to policy makers. Methods such as BRT may be more suited to such a task. Here we have demonstrated that GWR and BRT can produce comparable outputs

How do tsetse recognise their hosts? The role of shape in the responses of tsetse (Glossina fuscipes and G. palpalis) to artificial hosts

Palpalis-group tsetse, particularly the subspecies of Glossina palpalis and G. fuscipes, are the most important transmitters of human African trypanomiasis (HAT), transmitting .95% of cases. Traps and insecticide-treated targets are used to control tsetse but more cost-effective baits might be developed through a better understanding of the fly’s host-seeking behaviour.Electrocuting grids were used to assess the numbers of G. palpalis palpalis and G. fuscipes quanzensis attracted to and landing on square or oblong targets of black cloth varying in size from 0.01 m2 to 1.0 m2. For both species, increasing the size of a square target from 0.01 m2 (dimensions = 0.1 x 0.1 m) to 1.0 m2 (1.0 x 1.0 m) increased the catch ,4x however the numbers of tsetse killed per unit area of target declined with target size suggesting that the most cost efficient targets are not the largest. For G. f. quanzensis, horizontal oblongs, (1 m wide x 0.5 m high) caught, 1.8x more tsetse than vertical ones (0.5 m wide x 1.0 m high) but the opposite applied for G. p. palpalis. Shape preference was consistent over the range of target sizes. For G. p. palpalis square targets caught as many tsetse as the oblong; while the evidence is less strong the same appears to apply to G. f. quanzensis. The results suggest that targets used to control G. p. palpalis and G. f. quanzensis should be square, and that the most cost-effective designs, as judged by the numbers of tsetse caught per area of target, are likely to be in the region of 0.25 x 0.25 m2. The preference of G. p. palpalis for vertical oblongs is unique amongst tsetse species, and it is suggested that this response might be related to its anthropophagic behaviour and hence importance as a vector of HAT