5,243 research outputs found
Fabrication and capillary filling of sub-10nm nanochannels
Keywords: Nanochannels, capillarity, viscosit
Multi-silicon ridge nanofabrication by repeated edge lithography
We present a multi-Si nanoridge fabrication scheme and its application in nanoimprint\ud
lithography (NIL). Triple Si nanoridges approximately 120 nm high and 40 nm wide separated\ud
by 40 nm spacing are fabricated and successfully applied as a stamp in nanoimprint lithography.\ud
The fabrication scheme, using a full-wet etching procedure in combination with repeated edge\ud
lithography, consists of hot H3PO4 acid SiNx retraction etching, 20% KOH Si etching, 50% HF\ud
SiNx retraction etching and LOCal Oxidation of Silicon (LOCOS). Si nanoridges with smooth\ud
vertical sidewalls are fabricated by using Si 110 substrates and KOH etching. The presented\ud
technology utilizes a conventional photolithography technique, and the fabrication of multi-Si\ud
nanoridges on a full wafer scale has been demonstrated
Monolithic Integration of a Novel Microfluidic Device with Silicon Light Emitting Diode-Antifuse and Photodetector
Light emitting diode antifuse has been integrated into a microfluidic device that is realized with extended standard CMOS technological steps. The device comprises of a microchannel sandwiched between a photodiode detector and a nanometer-scale diode antifuse light emitter. Within this contribution, the device fabrication process, working principle and properties will be discussed. Change in the interference fringe of the antifuse spectra has been measured due to the filling of the channel. Preliminary applications are electroosmotic flow speed measurement, detection of absorptivity of liquids in the channe
Consumer credit in comparative perspective
We review the literature in sociology and related fields on the fast global growth of consumer credit and debt and the possible explanations for this expansion. We describe the ways people interact with the strongly segmented consumer credit system around the worldāmore specifically, the way they access credit and the way they are held accountable for their debt. We then report on research on two areas in which consumer credit is consequential: its effects on social relations and on physical and mental health. Throughout the article, we point out national variations and discuss explanations for these differences. We conclude with a brief discussion of the future tasks and challenges of comparative research on consumer credit.Accepted manuscrip
Molecular biodiversity of cassava begomoviruses in Tanzania: evolution of cassava geminiviruses in Africa and evidence for East Africa being a center of diversity of cassava geminiviruses
Cassava is infected by numerous geminiviruses in Africa and India that cause devastating losses to poor farmers. We here describe the molecular diversity of seven representative cassava mosaic geminiviruses (CMGs) infecting cassava from multiple locations in Tanzania. We report for the first time the presence of two isolates in East Africa: (EACMCV-[TZ1] and EACMCV-[TZ7]) of the species East African cassava mosaic Cameroon virus, originally described in West Africa. The complete nucleotide sequence of EACMCV-[TZ1] DNA-A and DNA-B components shared a high overall sequence identity to EACMCV-[CM] components (92% and 84%). The EACMCV-[TZ1] and -[TZ7] genomic components have recombinations in the same genome regions reported in EACMCV-[CM], but they also have additional recombinations in both components. Evidence from sequence analysis suggests that the two strains have the same ancient origin and are not recent introductions. EACMCV-[TZ1] occurred widely in the southern part of the country. Four other CMG isolates were identified: two were close to the EACMV-Kenya strain (named EACMV-[KE/TZT] and EACMV-[KE/TZM] with 96% sequence identity); one isolate, TZ10, had 98% homology to EACMV-UG2Svr and was named EACMV-UG2 [TZ10]; and finally one isolate was 95% identical to EACMV-[TZ] and named EACMV-[TZ/YV]. One isolate of African cassava mosaic virus with 97% sequence identity with other isolates of ACMV was named ACMV-[TZ]. It represents the first ACMV isolate from Tanzania to be sequenced. The molecular variability of CMGs was also evaluated using partial B component nucleotide sequences of 13 EACMV isolates from Tanzania. Using the sequences of all CMGs currently available, we have shown the presence of a number of putative recombination fragments that are more prominent in all components of EACMV than in ACMV. This new knowledge about the molecular CMG diversity in East Africa, and in Tanzania in particular, has led us to hypothesize about the probable importance of this part of Africa as a source of diversity and evolutionary change both during the early stages of the relationship between CMGs and cassava and in more recent times. The existence of multiple CMG isolates with high DNA genome diversity in Tanzania and the molecular forces behind this diversity pose a threat to cassava production throughout the African continent
Capillary origami of micro-machined micro-objects: Bi-layer conductive hinges
Recently, we demonstrated controllable 3D self-folding by means of capillary
forces of silicon-nitride micro-objects made of rigid plates connected to each
other by flexible hinges [1]. In this paper, we introduce platinum electrodes
running from the substrate to the plates over these bendable hinges. The
fabrication yield is as high as (77 +/- 2) % for hinges with a length less than
75 {\mu}m. The yield reduces to (18 +/- 2) % when the length increases above
100 {\mu}m. Most of the failures in conductivity are due to degradation of the
platinum/chromium layer stack during the final plasma cleaning step. The
bi-layer hinges survive the capillary folding process, even for extremely small
bending radii of 5 {\mu}m, nor does the bending have any impact on the
conductivity. Stress in the different layers deforms the hinges, which does not
affect the conductivity. Once assembled, the conductive hinges can withstand a
current density of (1.6 +/- 0.4) A/cm . This introduction of
conductive electrodes to elastocapillary self-folded silicon-based
micro-objects extends the range of their possible applications by allowing an
electronic functionality of the folded parts.Comment: Currently on a peer review process. 13 page
Elastocapillary folding using stop-programmable hinges fabricated by 3D micro-machining
We show elasto-capillary folding of silicon nitride objects with accurate
folding angles between flaps of 70.60.1{\deg} and demonstrate the
feasibility of such accurate micro-assembly with a final folding angle of
90{\deg}. The folding angle is defined by stop-programmable hinges that are
fabricated starting from silicon molds employing accurate three-dimensional
corner lithography. This nano-patterning method exploits the conformal
deposition and the subsequent timed isotropic etching of a thin film in a 3D
shaped silicon template. The technique leaves a residue of the thin film in
sharp concave corners which can be used as an inversion mask in subsequent
steps. Hinges designed to stop the folding at 70.6{\deg} were fabricated
batchwise by machining the V-grooves obtained by KOH etching in (110) silicon
wafers; 90{\deg} stop-programmable hinges were obtained starting from silicon
molds obtained by dry etching on (100) wafers. The presented technique is
applicable to any folding angle and opens a new route towards creating
structures with increased complexity, which will ultimately lead to a novel
method for device fabrication.Comment: Submitted to a peer reviewed journa
- ā¦