Statistical Mechanics of DNA-Mediated Colloidal Aggregation

We present a statistical mechanical model of aggregation in colloidal systems with DNA mediated interactions. We obtain a general result for the two-particle binding energy in terms of the hybridization free energy $\Delta G$ of DNA and two model dependent properties: the average number of available DNA bridges \left and the effective DNA conccentration $c_{eff}$. We calculate these parameters for a particular DNA bridging scheme. The fraction of all the $n$-mers, including the infinite aggregate, are shown to be universal functions of a single parameter directly related to the two-particle binding energy. We explicitly take into account the partial ergodicity of the problem resulting from the slow DNA binding-unbinding dynamics, and introduce the concept of angular localization of DNA linkers. In this way, we obtain a direct link between DNA thermodynamics and the global aggregation and melting properties in DNA-colloidal systems. The results of the theory are shown to be in quantitative agreement with two recent experiments with particles of micron and nanometer size. PACS numbers: 81.16.Dn, 82.20.Db, 68.65.-k, 87.14.GgComment: 12 pages, 6 figures, v2: added reference, expanded conclusion, added journal re

Theory of Melting and the Optical Properties of Gold/DNA Nanocomposites

We describe a simple model for the melting and optical properties of a DNA/gold nanoparticle aggregate. The optical properties at fixed wavelength change dramatically at the melting transition, which is found to be higher and narrower in temperature for larger particles, and much sharper than that of an isolated DNA link. All these features are in agreement with available experiments. The aggregate is modeled as a cluster of gold nanoparticles on a periodic lattice connected by DNA bonds, and the extinction coefficient is computed using the discrete dipole approximation. Melting takes place as an increasing number of these bonds break with increasing temperature. The melting temperature corresponds approximately to the bond percolation threshold.Comment: 5 pages, 4 figure. To be published in Phys. Rev.

SNP identification in unamplified human genomic DNA with gold nanoparticle probes

Single nucleotide polymorphisms (SNPs) comprise the most abundant source of genetic variation in the human genome. SNPs may be linked to genetic predispositions, frank disorders or adverse drug responses, or they may serve as genetic markers in linkage disequilibrium analysis. Thus far, established SNP detection techniques have utilized enzymes to meet the sensitivity and specificity requirements needed to overcome the high complexity of the human genome. Herein, we present for the first time a microarray-based method that allows multiplex SNP genotyping in total human genomic DNA without the need for target amplification or complexity reduction. This direct SNP genotyping methodology requires no enzymes and relies on the high sensitivity of the gold nanoparticle probes. Specificity is derived from two sequential oligonucleotide hybridizations to the target by allele-specific surface-immobilized capture probes and gene-specific oligonucleotide-functionalized gold nanoparticle probes. Reproducible multiplex SNP detection is demonstrated with unamplified human genomic DNA samples representing all possible genotypes for three genes involved in thrombotic disorders. The assay format is simple, rapid and robust pointing to its suitability for multiplex SNP profiling at the ‘point of care’

DNA-Functionalized Gold Nanoparticles in Macromolecularly Crowded Polymer Solutions

This document is the Accepted Manuscript version of a Published Work that appeared in final form in The Journal of Physical Chemistry B, copyright © American Chemical Society after peer review and technical editing by publisher. To access the final edited and published work see http://dx.doi.org/10.1021/jp310662mDNA-functionalized gold nanoparticles (AuNPs) are one of the most commonly used reagents in nanobiotechnology. They are important not only for practical applications in analytical chemistry and drug delivery, but also for fundamental understanding of nanoscience. For biological samples such as blood serum or for intracellular applications, the effects of crowded cellular proteins and nucleic acids need to be considered. The thermodynamic effect of crowding is to induce nanoparticle aggregation. But before such aggregation can take place, there might also be a depletion repulsive barrier. Polyethylene glycol (PEG) is one of the most frequently used polymers to mimic the crowded cellular environment. We show herein that while DNA-functionalized AuNPs are very stable in buffer (e.g., no PEG) and citrate-capped AuNPs are very stable in PEG, DNA-functionalized AuNPs are unstable in PEG and are easily aggregated. Although such aggregation in PEG is mediated by DNA, no sharp melting transition typical for DNA-linked AuNPs is observed. We attribute this broad melting to depletion force instead of DNA base pairing. The effects of PEG molecular weight, concentration and temperature have been studied in detail and we also find an interesting PEG phase separation and AuNP partition into the water-rich phase at high temperature.University of Waterloo || Canadian Foundation for Innovation || Natural Sciences and Engineering Research Council || Ontario Ministry of Research and Innovation |

Microscopic theory of single-electron tunneling through molecular-assembled metallic nanoparticles

We present a microscopic theory of single-electron tunneling through metallic nanoparticles connected to the electrodes through molecular bridges. It combines the theory of electron transport through molecular junctions with the description of the charging dynamics on the nanoparticles. We apply the theory to study single-electron tunneling through a gold nanoparticle connected to the gold electrodes through two representative benzene-based molecules. We calculate the background charge on the nanoparticle induced by the charge transfer between the nanoparticle and linker molecules, the capacitance and resistance of molecular junction using a first-principles based Non-Equilibrium Green's Function theory. We demonstrate the variety of transport characteristics that can be achieved through ``engineering'' of the metal-molecule interaction.Comment: To appear in Phys. Rev.

Structure Formation, Melting, and the Optical Properties of Gold/DNA Nanocomposites: Effects of Relaxation Time

We present a model for structure formation, melting, and optical properties of gold/DNA nanocomposites. These composites consist of a collection of gold nanoparticles (of radius 50 nm or less) which are bound together by links made up of DNA strands. In our structural model, the nanocomposite forms from a series of Monte Carlo steps, each involving reaction-limited cluster-cluster aggregation (RLCA) followed by dehybridization of the DNA links. These links form with a probability $p_{eff}$ which depends on temperature and particle radius $a$. The final structure depends on the number of monomers (i. e. gold nanoparticles) $N_m$, $T$, and the relaxation time. At low temperature, the model results in an RLCA cluster. But after a long enough relaxation time, the nanocomposite reduces to a compact, non-fractal cluster. We calculate the optical properties of the resulting aggregates using the Discrete Dipole Approximation. Despite the restructuring, the melting transition (as seen in the extinction coefficient at wavelength 520 nm) remains sharp, and the melting temperature $T_M$ increases with increasing $a$ as found in our previous percolation model. However, restructuring increases the corresponding link fraction at melting to a value well above the percolation threshold. Our calculated extinction cross section agrees qualitatively with experiments on gold/DNA composites. It also shows a characteristic ``rebound effect,'' resulting from incomplete relaxation, which has also been seen in some experiments. We discuss briefly how our results relate to a possible sol-gel transition in these aggregates.Comment: 12 pages, 10 figure

Programmable Assembly of DNA-Functionalized Liposomes by DNA

This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Nano, copyright © American Chemical Society after peer review and technical editing by publisher. To access the final edited and published work see http://dx.doi.org/10.1021/nn1030093Bionanotechnology involves the use of biomolecules to control both the structure and property of nanomaterials. One of the most studied examples is DNA-directed assembly of inorganic nanoparticles such as gold nanoparticles (AuNPs). However, systematic studies on DNA-linked soft nanoparticles, such as liposomes, are still lacking. We herein report the programmable assembly and systematic characterization of DNA-linked liposomes as a function of liposome size, charge, fluidity, composition, DNA spacer, linker DNA sequence, and salt concentration for direct comparison to DNA-directed assembly of AuNPs. Similar to the assemblies of AuNPs, sharp melting transitions were observed for liposomes where the first derivative of the melting curve full width at half-maximum (fwhm) is equal to or less than 1 °C for all of the tested liposomes, allowing sequence specific DNA detection. We found that parameters such as liposome size, charge, and fluidity have little effect on the DNA melting temperature. Cryo-TEM studies showed that programmable assemblies can be obtained and that the majority of the liposomes maintained a spherical shape in the assembled state. While liposome and AuNP systems are similar in many aspects, there are also important differences that can be explained by their respective physical properties.University of Waterloo || Natural Sciences and Engineering Research Council |

Glyconanoparticles for colorimetric bioassays

Carbohydrate molecules are involved in many of the cellular processes that are important for life. By combining the specific analyte targeting of carbohydrates with the multivalent structure and change of solution colour as a consequence of plasmonic interactions with the aggregation of metal nanoparticles, glyconanoparticles have been used extensively for the development of bioanalytical assays. The noble metals used to create the nanocore, the methodologies used to assemble the carbohydrates on the nanoparticle surface, the carbohydrate chosen for each specific target, the length of the tether that separates the carbohydrate from the nanocore and the density of carbohydrates on the surface all impact on the structural formation of metal based glyconanoparticles. This tutorial review highlights these key components, which directly impact on the selectivity and sensitivity of the developed bioassay, for the colorimetric detection of lectins, toxins and viruses

New Colloidal Lithographic Nanopatterns Fabricated by Combining Pre-Heating and Reactive Ion Etching

We report a low-cost and simple method for fabrication of nonspherical colloidal lithographic nanopatterns with a long-range order by preheating and oxygen reactive ion etching of monolayer and double-layer polystyrene spheres. This strategy allows excellent control of size and morphology of the colloidal particles and expands the applications of the colloidal patterns as templates for preparing ordered functional nanostructure arrays. For the first time, various unique nanostructures with long-range order, including network structures with tunable neck length and width, hexagonal-shaped, and rectangular-shaped arrays as well as size tunable nanohole arrays, were fabricated by this route. Promising potentials of such unique periodic nanostructures in various fields, such as photonic crystals, catalysts, templates for deposition, and masks for etching, are naturally expected

Surface Science of DNA Adsorption onto Citrate-Capped Gold Nanoparticles

This document is the Accepted Manuscript version of a Published Work that appeared in final form in Langmuir copyright © American Chemical Society after peer review and technical editing by publisher. To access the final edited and published work see Zhang, X., Servos, M. R., & Liu, J. (2012). Surface Science of DNA Adsorption onto Citrate-Capped Gold Nanoparticles. Langmuir, 28(8), 3896–3902. https://doi.org/10.1021/la205036pSingle-stranded DNA can be adsorbed by citrate capped gold nanoparticles (AuNPs), resulting in increased AuNP stability, which forms the basis of a number of biochemical and analytical applications, but the fundamental interaction of this adsorption reaction remains unclear. In this study, we measured DNA adsorption kinetics, capacity, and isotherms, demonstrating that the adsorption process is governed by electrostatic forces. The charge repulsion among DNA strands and between DNA and AuNPs can be reduced by adding salt, reducing pH or by using noncharged peptide nucleic acid (PNA). Langmuir adsorption isotherms are obtained, indicating the presence of both adsorption and desorption of DNA from AuNPs. While increasing salt concentration facilitates DNA adsorption, the desorption rate is also enhanced in higher salt due to DNA compaction. DNA adsorption capacity is determined by DNA oligomer length, DNA concentration, and salt. Previous studies indicated faster adsorption of short DNA oligomers by AuNPs, we find that once adsorbed, longer DNAs are much more effective in protecting AuNPs from aggregation. DNA adsorption is also facilitated by using low pH buffers and high alcohol concentrations. A model based on electrostatic repulsion on AuNPs is proposed to rationalize the DNA adsorption/desorption behavior.University of Waterloo || Canadian Foundation for Innovation || Ontario Ministry of Research & Innovation || Canadian Institutes of Health Research || Natural Sciences and Engineering Research Council |