570 research outputs found
Long-life mission reliability for outer planet atmospheric entry probes
The results of a literature analysis on the effects of prolonged exposure to deep space environment on the properties of outer planet atmospheric entry probe components are presented. Materials considered included elastomers and plastics, pyrotechnic devices, thermal control components, metal springs and electronic components. The rates of degradation of each component were determined and extrapolation techniques were used to predict the effects of exposure for up to eight years to deep space. Pyrotechnic devices were aged under accelerated conditions to an equivalent of eight years in space and functionally tested. Results of the literature analysis of the selected components and testing of the devices indicated that no severe degradation should be expected during an eight year space mission
Controlling chaos in spatially extended beam-plasma system by the continuous delayed feedback
In present paper we discuss the control of complex spatio-temporal dynamics
in a {spatially extended} non-linear system (fluid model of Pierce diode) based
on the concepts of controlling chaos in the systems with few degrees of
freedom. A presented method is connected with stabilization of unstable
homogeneous equilibrium state and the unstable spatio-temporal periodical
states analogous to unstable periodic orbits of chaotic dynamics of the systems
with few degrees of freedom. We show that this method is effective and allows
to achieve desired regular dynamics chosen from a number of possible in the
considered system.Comment: 12 pages, 12 figure
Alanine scanning mutagenesis of a high-affinity nitrate transporter highlights the requirement for glycine and asparagine residues in the two nitrate signature motifs
Common to all of the nitrate nitrite porter family are two conserved motifs in transmembrane helices 5 and 11 termed NS (nitrate signature) 1 and NS2. Although perfectly conserved substrate-interacting arginine residues have been described in transmembrane helices 2 and 8, the role of NSs has not been investigated. In the present study, a combination of structural modelling of NrtA (nitrate transporter from Aspergillus nidulans) with alanine scanning mutagenesis of residues within and around the NSs has been used to shed light on the probable role of conserved residues in the NSs. Models show that Asn 168 in NS1 and Asn 459 in NS2 are positioned approximately midway within the protein at the central pivot point in close proximity to the substrate-binding residues Arg 368 and Arg 87 respectively, which lie offset from the pivot point towards the cytoplasmic face. The Asn 168 /Arg 368 and Asn 459 /Arg 87 residue pairs are relatively widely separated on opposite sides of the probable substrate translocation pore. The results of the present study demonstrate the critical structural contribution of several glycine residues in each NS at sites of close helix packing. Given the relative locations of Asn 168 /Arg 368 and Asn 459 /Arg 87 pairs, the validity of the models and possible role of the NSs together with the substrate-binding arginine residues are discusse
Non-invasive biomechanical characterization of intervertebral discs by shear wave ultrasound elastography: a feasibility study.
PublishedJournal ArticleThe final publication is available at Springer via http://dx.doi.org/10.1007/s00330-014-3382-8OBJECTIVES: Although magnetic resonance is widely spread to assess qualitatively disc morphology, a simple method to determine reliably intervertebral disc status is still lacking. Shear wave elastography is a novel technique that allows quantitative evaluation of soft-tissues' mechanical properties. The aim of this study was to assess preliminary the feasibility and reliability of mechanical characterization of cervical intervertebral discs by elastography and to provide first reference values for asymptomatic subjects. METHODS: Elastographic measurements were performed to determine shear wave speed (SWS) in C6-C7 or C7-T1 disc of 47 subjects; repeatability and inter-operator reproducibility were assessed. RESULTS: Global average shear wave speed (SWS) was 3.0 ± 0.4 m/s; measurement repeatability and inter-user reproducibility were 7 and 10%, respectively. SWS was correlated with both subject's age (p = 1.3 × 10(-5)) and body mass index (p = 0.008). CONCLUSIONS: Shear wave elastography in intervertebral discs proved reliable and allowed stratification of subjects according to age and BMI. Applications could be relevant, for instance, in early detection of disc degeneration or in follow-up after trauma; these results open the way to larger cohort studies to define the place of this technique in routine intervertebral disc assessment. KEY POINTS: A simple method to obtain objectively intervertebral disc status is still lacking. Shear wave elastography was applied in vivo to assess intervertebral discs. Elastography showed promising results in biomechanical disc evaluation. Elastography could be relevant in clinical routine for intervertebral disc assessment.ParisTech BiomecAM chair programParisTechYves Cotrel FoundationsSociété GénéraleProteorCove
Experience With Radical Resection in The Management of Proximal Bile Duct Cancer
Multiple surgical and nonsurgical approaches have been advocated for the treatment of proximal bile duct
cancer. However, survival appears longest when a resection can be performed. Fifteen patients treated at a
university center were managed with an aggressive surgical approach. Resection of the tumor was
performed in 13 of 15 patients (87%). Of the patients undergoing resection, major hepatic resection was
performed in 8 (62%), while excision of vessels with reconstruction was performed in 5 (38%). Eleven of
the 13 resected patients (85%) were discharged from the hospital. Clinical symptoms of recurrent disease
occurred between 3 and 36 months after surgery in 7 patients, 6 of whom have died. Three other patients
are alive at 5, 21, and 36 months without clinical evidence of recurrence. There was no correlation between
the completeness of resection and the duration of disease-free survival
In vivo cervical intervertebral disc characterisation by elastography.
PublishedJournal ArticleThis is an Accepted Manuscript of an article published by Taylor & Francis in Computer Methods in Biomechanics and Biomedical Engineering on 30/07/2014, available online: http://www.tandfonline.com/10.1080/10255842.2014.931515Not availableParisTech BiomecAM chair programProteorSociété GénéraleCoveaParisTechYves Cotrel Foundation
Intervertebral disc characterization by shear wave elastography: An in vitro preliminary study.
Published onlineJOURNAL ARTICLEAuthor's accepted (post-print) manuscriptThe final version of record is available at http://dx.doi.org/10.1177/0954411914540279Patient-specific numerical simulation of the spine is a useful tool both in clinic and research. While geometrical personalization of the spine is no more an issue, thanks to recent technological advances, non-invasive personalization of soft tissue's mechanical properties remains a challenge. Ultrasound elastography is a relatively recent measurement technique allowing the evaluation of soft tissue's elastic modulus through the measurement of shear wave speed. The aim of this study was to determine the feasibility of elastographic measurements in intervertebral disc. An in vitro approach was chosen to test the hypothesis that shear wave speed can be used to evaluate intervertebral disc mechanical properties and to assess measurement repeatability. In total, 11 oxtail intervertebral discs were tested in compression to determine their stiffness and apparent elastic modulus at rest and at 400 N. Elastographic measurements were performed in these two conditions and compared to these mechanical parameters. The protocol was repeated six times to determine elastographic measurement repeatability. Average shear wave speed over all samples was 5.3 ± 1.0 m/s, with a repeatability of 7% at rest and 4.6% at 400 N; stiffness and apparent elastic modulus were 266.3 ± 70.5 N/mm and 5.4 ± 1.1 MPa at rest, respectively, while at 400 N they were 781.0 ± 153.8 N/mm and 13.2 ± 2.4 MPa, respectively. Correlations were found between elastographic measurements and intervertebral disc mechanical properties; these preliminary results are promising for further in vivo application.ParisTech BiomecAM chair programProteorParisTechYves Cotrel Foundation
Probing structural relaxation in complex fluids by critical fluctuations
Complex fluids, such as polymer solutions and blends, colloids and gels, are
of growing interest in fundamental and applied soft-condensed-matter science. A
common feature of all such systems is the presence of a mesoscopic structural
length scale intermediate between atomic and macroscopic scales. This
mesoscopic structure of complex fluids is often fragile and sensitive to
external perturbations. Complex fluids are frequently viscoelastic (showing a
combination of viscous and elastic behaviour) with their dynamic response
depending on the time and length scales. Recently, non-invasive methods to
infer the rheological response of complex fluids have gained popularity through
the technique of microrheology, where the diffusion of probe spheres in a
viscoelastic fluid is monitored with the aid of light scattering or microscopy.
Here we propose an alternative to traditional microrheology that does not
require doping of probe particles in the fluid (which can sometimes drastically
alter the molecular environment). Instead, our proposed method makes use of the
phenomenon of "avoided crossing" between modes associated with the structural
relaxation and critical fluctuations that are spontaneously generated in the
system.Comment: 4 pages, 4 figure
Filmic geographies: audio-visual, embodied-material
Although conventionally described as a ‘visual’ method, film-making is also increasingly used within research on embodiment. However, much remains to be said about the ability of filmic methods to enhance researchers’ capacity to think and research through the body. Drawing on my experience of making four research films, in this paper, I attempt to advance this agenda in three steps. First, I introduce anthropological work on the filming body to shed light on the technologically-mediated encounters that enfold around a camera and discuss how they might inform geographical thinking. Second, I describe the corporeally-mediated object ecologies that take shape within the filming setting and highlight how a camera might make objects ‘speak’. Finally, I discuss the affective dimension of screening research films to research participants and the contribution of such intense events to the articulation of collective matters of concerns. Through these three themes, I make the case for understanding knowledge production as located not merely in encounters with filmed audio-visual content, but also in the embodied-material encounters of bodies and objects around the filming and screening apparatus. I finally discuss the implications of these reflections for conceptualising the ‘body’ within embodied methods in social and cultural geography
- …