CFRP Dimensional Stability Investigations for Use on the LISA Mission Telescope

The Laser Interferometer Space Antenna (LISA) is a mission designed to detect low frequency gravitational-waves. In order for LISA to succeed in its goal of direct measurement of gravitational waves, many subsystems must work together to measure the distance between proof masses on adjacent spacecraft. One such subsystem, the telescope, plays a critical role as it is the laser transmission and reception link between spacecraft. Not only must the material that makes up the telescope support structure be strong, stiff and light, but it must have a dimensional stability of better than 1 pm Hz(exp -1/2) at 3 mHz and the distance between the primary and the secondary mirrors must change by less than 2.5 micron over the mission lifetime. CFRP is the current baseline materiaL however, it has not been tested to the pico-meter level as required by the LISA mission. In this paper we present dimensional stability results, outgassing effects occurring in the cavity and discuss its feasibility for use as the telescope spacer for the LISA spacecraft

Note: Silicon Carbide Telescope Dimensional Stability for Space-based Gravitational Wave Detectors

Space-based gravitational wave detectors are conceived to detect gravitational waves in the low frequency range by measuring the distance between proof masses in spacecraft separated by millions of kilometers. One of the key elements is the telescope which has to have a dimensional stability better than 1 pm Hz(exp 1/2) at 3 mHz. In addition, the telescope structure must be light, strong, and stiff. For this reason a potential telescope structure consisting of a silicon carbide quadpod has been designed, constructed, and tested. We present dimensional stability results meeting the requirements at room temperature. Results at 60 C are also shown although the requirements are not met due to temperature fluctuations in the setup

On the presentation of the LHC Higgs Results

We put forth conclusions and suggestions regarding the presentation of the LHC Higgs results that may help to maximize their impact and their utility to the whole High Energy Physics community.Comment: Conclusions from the workshops "Likelihoods for the LHC Searches", 21-23 January 2013 at CERN, "Implications of the 125 GeV Higgs Boson", 18-22 March 2013 at LPSC Grenoble, and from the 2013 Les Houches "Physics at TeV Colliders" workshop. 16 pages, 3 figures. Version 2: Comment added on the first publication of signal strength likelihoods in digital form by ATLA

Silicon Carbide Telescope Investigations for the LISA Mission

Space-based gravitational wave (GW) detectors are conceived to detect GWs in the low frequency range (mili-Hertz) by measuring the distance between free-falling proof masses in spacecraft (SC) separated by 5 Gm. The reference in the last decade has been the joint ESA-NASA mission LISA. One of the key elements of LISA is the telescope since it simultaneously gathers the light coming from the far SC (approximately or equal to 100 pW) and expands, collimates and sends the outgoing beam (2 W) to the far SC. Demanding requirements have been imposed on the telescope structure: the dimensional stability of the telescope must be approximately or equal to 1pm Hz(exp1/2) at 3 mHz and the distance between the primary and the secondary mirrors must change by less than 2.5 micrometer over the mission lifetime to prevent defocussing. In addition the telescope structure must be light, strong and stiff. For this reason a potential on-axis telescope structure for LISA consisting of a silicon carbide (SiC) quadpod structure has been designed, constructed and tested. The coefficient of thermal expansion (CTE) in the LISA expected temperature range has been measured with a 1% accuracy which allows us to predict the shrinkage/expansion of the telescope due to temperature changes, and pico-meter dimensional stability has been measured at room temperature and at the expected operating temperature for the LISA telescope (around -6[deg]C). This work is supported by NASA Grants NNX10AJ38G and NX11AO26G

SUSY Survey with Inclusive Muon and Same-Sign Dimuon Accompanied by Jets and MET with CMS

Generic signatures of supersymmetry with R-parity conservation include those of single isolated muons or like-sign isolated dimuon pairs, accompanied with energetic jets and missing transverse energy. The ability of CMS to discover supersymmetry with these signals is estimated for 10 fb^{-1} of data collected with the inclusive single-muon and dimuon High-Level-Trigger paths. The selection criteria are optimized and the systematic effects are studied for a single low-mass benchmark point of the constrained MSSM with m_0 = 60,GeV/c^2, m_{1/2} = 250,GeVc^2, tan beta=10, A_0=0 and mu> 0. Discovery contours in the m_0, m_{1/2}) plane are presented for integrated luminosities ranging from 1 to 100, fb^{-1}

Les Houches 2013: Physics at TeV Colliders: Standard Model Working Group Report

This Report summarizes the proceedings of the 2013 Les Houches workshop on Physics at TeV Colliders. Session 1 dealt primarily with (1) the techniques for calculating standard model multi-leg NLO and NNLO QCD and NLO EW cross sections and (2) the comparison of those cross sections with LHC data from Run 1, and projections for future measurements in Run 2.Comment: Proceedings of the Standard Model Working Group of the 2013 Les Houches Workshop, Physics at TeV Colliders, Les houches 3-21 June 2013. 200 page

Tevatron-for-LHC Report: Preparations for Discoveries

This is the "TeV4LHC" report of the "Physics Landscapes" Working Group, focused on facilitating the start-up of physics explorations at the LHC by using the experience gained at the Tevatron. We present experimental and theoretical results that can be employed to probe various scenarios for physics beyond the Standard Model.Comment: 222 pp., additional contribution added, typos/layout correcte

Search for the Supersymmetric Partner of the Top-Quark in ppˉp \bar{p} Collisions at s=1.8TeV\sqrt{s} = 1.8 {\rm TeV}

We report on a search for the supersymmetric partner of the top quark (stop) produced in $t \bar{t}$ events using $110 {\rm pb}^{-1}$ of $p \bar{p}$ collisions at $\sqrt{s} = 1.8 {\rm TeV}$ recorded with the Collider Detector at Fermilab. In the case of a light stop squark, the decay of the top quark into stop plus the lightest supersymmetric particle (LSP) could have a significant branching ratio. The observed events are consistent with Standard Model $t \bar{t}$ production and decay. Hence, we set limits on the branching ratio of the top quark decaying into stop plus LSP, excluding branching ratios above 45% for a LSP mass up to 40 {\rm GeV/c}$^{2}$.Comment: 11 pages, 4 figure

Measurement of the ttˉproductioncrosssectionint\bar{t} production cross section in p\bar{p}collisionsat collisions at \sqrt{s}$ = 1.8 TeV

We update the measurement of the top production cross section using the CDF detector at the Fermilab Tevatron. This measurement uses $t\bar{t}$ decays to the final states $e+\nu$+jets and $\mu+\nu$+jets. We search for $b$ quarks from $t$ decays via secondary-vertex identification or the identification of semileptonic decays of the $b$ and cascade $c$ quarks. The background to the $t\bar{t}$ production is determined primarily through a Monte Carlo simulation. However, we calibrate the simulation and evaluate its uncertainty using several independent data samples. For a top mass of 175 $GeV/c^2$, we measure $\sigma_{t\bar{t}}=5.1 \pm 1.5$ pb and $\sigma_{t\bar{t}}=9.2 \pm 4.3$ pb using the secondary vertex and the lepton tagging algorithms, respectively. Finally, we combine these results with those from other $t\bar{t}$ decay channels and obtain $\sigma_{t\bar{t}} = 6.5^{+1.7}_{-1.4}$ pb.Comment: The manuscript consists of 130 pages, 35 figures and 42 tables in RevTex. The manuscript is submitted to Physical Review D. Fixed typo in author lis

Search for New Particles Decaying to Dijets at CDF

We have used 106 pb^-1 of data collected with the Collider Detector at Fermilab to search for new particles decaying to dijets. We exclude at the 95% confidence level models containing the following new particles: axigluons and flavor universal colorons with mass between 200 and 980 GeV/c, excited quarks with mass between 80 and 570 GeV/c^2 and between 580 and 760 GeV/c^2, color octet technirhos with mass between 260 and 480 GeV/c^2, W' bosons with mass between 300 and 420 GeV/c^2, and E_6 diquarks with mass between 290 and 420 GeV/c^2.Comment: 18 pages, 4 figures, 1 table. Submitted to Physical Review D Rapid Communications. Postscript file of paper is also available at http://www-cdf.fnal.gov/physics/pub97/cdf3276_dijet_search_prd_rc.p