6,523 research outputs found
Are the Earth and the Moon compositionally alike? Inferences on lunar composition and implications for lunar origin and evolution from geophysical modeling
The main objective of the present study is to discuss in detail the results obtained from an inversion of the Apollo lunar seismic data set, lunar mass, and moment of inertia. We inverted directly for lunar chemical composition and temperature using the model system CaO-FeO-MgO-Al2O3-SiO2. Using Gibbs free energy minimization, stable
mineral phases at the temperatures and pressures of interest, their modes and physical properties are calculated. We determine the compositional range of the oxide elements, thermal state, Mg#, mineralogy and physical structure of the lunar interior, as well as constraining core size and density. The results indicate a lunar mantle mineralogy that is dominated by olivine and orthopyroxene ( 80 vol%), with the remainder being composed of clinopyroxene and an aluminous phase (plagioclase, spinel, and garnet present in the depth ranges 0–150 km, 150–200 km, and >200 km, respectively). This model is broadly
consistent with constraints on mantle mineralogy derived from the experimental and
observational study of the phase lationships and trace element compositions of lunar
mare basalts and picritic glasses. In particular, by melting a typical model mantle
composition using the pMELTS algorithm, we found that a range of batch melts generated
from these models have features in common with low Ti mare basalts and picritic glasses. Our results also indicate a bulk lunar composition and Mg# different to that of the Earth’s upper mantle, represented by the pyrolite composition. This difference is reflected in a lower bulk lunar Mg# ( 0.83). Results also indicate a small iron-like core with a radius around 340 km.The Carlsberg Foundation, NER
Analysis of N-nitrosamines in water by isotope dilution gas chromatography-electron ionisation tandem mass spectrometry
A method has been developed for the determination of eight N-nitrosamines in drinking water and treated municipal effluent. The method uses solid phase extraction (SPE), gas chromatography (GC) and analysis by tandem mass spectrometry (MS-MS) with electron ionization (EI). The target compounds are N-nitrosodimethylamine (NDMA), N-nitrosomethyethylamine (NMEA), N-nitrosodiethylamine NDEA), N-nitrosodipropylamine (NDPA), N-nitrosodi-n-butylamine (NDBuA), N-nitrosodiphenylamine (NDPhA), N-nitrosopyrrolidine (NPyr), N-nitrosopiperidine (NPip), N-nitrosomorpholine (NMorph). The use of direct isotope analogues for isotope dilution analysis of all analytes ensures accurate quantification, accounting for analytical variabilities that may occur during sample processing, extraction and instrumental analysis. Method detection levels (MDLs) were determined to describe analyte concentrations sufficient to provide a signal with 99% certainty of detection. The established MDLs for all analytes were 0.4–4 ng L−1 in a variety of aqueous matrices. Sample matrices were observed to have only a minor impact on MDLs and the method validation confirmed satisfactory method stability over intra-day and inter-day analyses of tap water and tertiary treated effluent sample
Study on the effect of zeolite rice husk particles on polysulfone membrane
Rice Husk Zeolite Type Y (RHY) particles were prepared under static hydrothermal conditions by dissolution of sodium hydroxide (NaOH), sodium aluminate (NaAlO2) and amorphous silica obtained from rice husk ash (RHA). The RHY/polysulfones (PSf) membranes incorporated with RHY particle at different loading were prepared through phase inversion technique. Physical characterization were carried out using thermogravimetric analysis (TGA), scanning electron microscope (SEM), porosity, tensile strength, atomic force microscope (AFM) and water contact angle (CA). The X-ray diffraction (XRD) analysis confirmed the transformation of RHA into zeolite type Y supported with Field Emission Scanning electron microscopy (FESEM) image and Energy dispersive X-ray spectroscopy (EDX). The EDX analysis showed that the Si/Al ratio was 2.007 which indicate the zeolite products is in hydrophilic condition. Meanwhile, the performance of the fabricated membrane was evaluated through pure water permeation (PWP), rejection and antifouling properties. The membranes with 2wt% of RHY showed the highest water permeability (315.29 Lm-2h-1), hydrophilicity (45o) porosity (41.5%) and good rejection (97.8%) ability. Membranes with higher RHY content (more than 2wt. %) generated more particle agglomeration that disturbs membrane structure as can be observed in the cross-section and external surface morphology. In fact, the excessive amount of RHY particles caused deduction of membrane permeation, compared to the pristine membrane which indicated the ability of membrane to absorb the foulants. The incorporation of RHY (1 to 5wt. %) increase the humic acid rejection from 95.8 to 99.6 %. It also found that PSf-RHY membrane having higher absorptive and fouling values than pristine PSf membrane. It can be concluded that the addition of RHY could enhance the hydrophilicity of the PSf membrane with optimum value of 2 wt.%. However, the addition of RHY need to be properly controlled as the high RHY loading could create an adverse effect for the foulants
Removal of trace organics by MBR treatment: the role of molecular properties
This study examined the relationship between specific molecular features of trace organic contaminants and their removal efficiencies by a laboratory scale membrane bioreactor (MBR). Removal efficiencies of 40 trace organic compounds were assessed under stable operating conditions. The reported results demonstrate an apparent correlation between chemical structures and the removal of trace organic contaminants by the laboratory scale MBR system. The removal of all 14 very hydrophobic (Log D \u3e 3.2) trace organic compounds selected in this study was consistently high and was above 85%. The occurrence and types of electron withdrawing or donating functional groups appear to be important factors governing their removal by MBR treatment. In this study, all hydrophilic and moderately hydrophobic (Log D \u3c 3.2) compounds possessing strong electron withdrawing functional groups showed removal efficiency of less than 20%. In contrast, high removal efficiencies were observed with most compounds bearing electron donating functional groups such as hydroxyl and primary amine groups. A qualitative framework for the assessment of trace organic removal by MBR treatment was proposed to provide further insights into the removal mechanisms
Effects of caustic cleaning on pore size of nanofiltration membranes and their rejection of trace organic chemicals
The aim of this study was to assess the impact of caustic cleaning on the rejection of three different trace organic chemical (TrOC) groups (i.e. neutral hydrophilic, neutral hydrophobic and negatively charged) by two nanofiltration (NF) membranes ‒ namely NF270 and NF90. Chemical cleaning was simulated by exposing virgin membrane samples to commercial caustic cleaning formulations as well as sodium hydroxide solutions containing analytical grade additives such as sodium dodecyl sulfate or ethylenediaminetetraacetic acid. The membrane average pore size before and after exposure to a commercially available caustic cleaning formulation was determined based on the pore transport model. The results show that caustic chemical cleaning could cause an increase in the membrane pore size, leading to an increase in permeability and decrease in rejection of conductivity. The impact of caustic cleaning on the pore size and solute rejection was a function of the membrane active skin layer and the chemistry of the cleaning formulation. Caustic cleaning led to a small increase in pore size of the NF270 membrane and resulted in a notable increase in the permeability and salt passage. By contrast, the impact on the NF90 membrane was negligible. The influence of caustic cleaning on TrOC rejection was dependent on physical characteristics of each TrOC including their molecular size, charge, and hydrophobicity. The rejection of neutral and hydrophobic TrOC by the NF270 membrane decreased significantly after exposure to caustic cleaning formulation. However, because the rejection of negatively charged TrOC is governed mostly by electrostatic interaction, their rejection was not significantly affected by caustic cleaning
Effects of thermal pre-treatment and recuperative thickening on the fate of trace organic contaminants during anaerobic digestion of sewage sludge
This study examined the effects of thermal pre-treatment and recuperative thickening on anaerobic digestion of sewage sludge on biogas production and removal of trace organic contaminants (TrOCs). Thermal pre-treatment and recuperative thickening resulted in approximately 15% increase in biogas production. However, the effects of thermal pretreatement and recuperative thickening on anaerobic digestion performance in respect to the removal of TrOCs were less obvious and varied widely depending on the molecular properties of each compound. Of the 40 TrOCs monitored in this study, 16 TrOCs were detected in all primary sludge samples. Removal from the aqueous phase was negligible for most of these 16 TrOCs. Caffeine and paracetamol were the only two TrOCs with a high removal from the aqueous phase. In comparison to the aqueous phase, TrOC removal from the solid phase was considerably higher. Through a mass balance calculation, it was shown that thermal pre-treatment or a combination of thermal pre-treatment and recuperative thickening could enhance the biodegradation of five persistent TrOCs, namely TCEP, verapamil, clozapine, triclosan, and triclocarban by 17-50%
N-nitrosamine rejection by nanofiltration and reverse osmosis membranes: The importance of membrane characteristics
The influence of membrane characteristics on the rejection of eight N-nitrosamines was investigated using one nanofiltration (NF), one seawater reverse osmosis (SWRO) and six low pressure reverse osmosis (LPRO) membranes. The rejection of the two lowest molecular weight N-nitrosamines, namely N-nitrosodimethylamine (NDMA) and N-nitrosomethylethylamine (NMEA), varied in the range from 8-82% to 23-94%, respectively. In general, the rejection of NDMA and NMEA increased with decreasing membrane permeability. The impact of membrane characteristics became less important for higher molecular weight N-nitrosamines. Among the four LPRO membranes (i.e. ESPA2, LFC3, TFC-HR and 70LW) that are commonly used for water reclamation applications, similar rejections were obtained for NDMA (37-52%) and NMEA (69-82%). In addition, rejection values of NDMA and NMEA among two LPRO membranes (i.e. ESPA2 and 70LW) were almost identical when compared under variable permeate flux and feed temperature conditions. However, it is noteworthy that the ESPABmembrane could achieve very high rejection of NDMA (as high as 71%) despite having a similar permeability to the LPRO membranes. Results reported here suggest that membrane characteristics associated with permeability such as the pore size and thickness of the active skin layer can be a key factor determining N-nitrosamine rejection
Continuous transformation of chiral pharmaceuticals in enzymatic membrane bioreactors for advanced wastewater treatment
This study demonstrates continuous enantiomeric inversion and further biotransformation of chiral profens including ibuprofen, naproxen and ketoprofen by an enzymatic membrane bioreactor (EMBR) dosed with laccase. The EMBR showed non-enantioselective transformations, with high and consistent transformation of both (R)- and (S)-ibuprofen (93 ± 6%, n = 10), but lower removals of both enantiomers of naproxen (46 ± 16%, n = 10) and ketoprofen (48 ± 17%, n = 10). Enantiomeric analysis revealed a bidirectional but uneven inversion of the profens, for example 14% inversion of (R)- to (S)- compared to 4% from (S)- to (R)-naproxen. With redox-mediator addition, the enzymatic chiral inversion of both (R)- and (S)-profens remained unchanged, although the overall conversion became enantioselective; except for (S)-naproxen, the addition of redox mediator promoted the degradation of (R)-profens only
An anaerobic membrane bioreactor - membrane distillation hybrid system for energy recovery and water reuse: Removal performance of organic carbon, nutrients, and trace organic contaminants
In this study, a direct contact membrane distillation (MD) unit was integrated with an anaerobic membrane bioreactor (AnMBR) to simultaneously recover energy and produce high quality water for reuse from wastewater. Results show that AnMBR could produce 0.3-0.5 L/g CODadded biogas with a stable methane content of approximately 65%. By integrating MD with AnMBR, bulk organic matter and phosphate were almost completely removed. The removal of the 26 selected trace organic contaminants by AnMBR was compound specific, but the MD process could complement AnMBR removal, leading to an overall efficiency from 76% to complete removal by the integrated system. The results also show that, due to complete retention, organic matter (such as humic-like and protein-like substances) and inorganic salts accumulated in the MD feed solution and therefore resulted in significant fouling of the MD unit. As a result, the water flux of the MD process decreased continuously. Nevertheless, membrane pore wetting was not observed throughout the operation
Seasonal variations in fate and removal of trace organic chemical contaminants while operating a full-scale membrane bioreactor
- …