Optical test of the DS1 prototype concentrating surface

This paper describes the optical test of the DS1 prototype concentrating surface carried out by CTAER. The DS1 is a parabolic Stirling dish developed under the framework of “SOLARDIS” project. The aim of this investigation was to characterize the DS1 prototype optical parameters. For this purpose the real and the theoretical flux distribution was calculated on a target placed at the focal length and a comparison between them reported about the value of some relevant parameters. The theoretical flux distribution was obtained by photogrammetry technique and ray tracing tools; the real flux distribution was measured by photographic flux mapping technique of lunar images. The results comparison showed that the dish surface had an average optical error of 2.5mrad (it includes errors due to deviation of surface normal vector and the effect of the specularity, but it does not include the sun shape error) and an estimated spillage value of 7%, for this geometry

Optical test of the DS1 prototype concentrating surface

This paper describes the optical test of the DS1 prototype concentrating surface carried out by CTAER. The DS1 is a parabolic Stirling dish developed under the framework of “SOLARDIS” project. The aim of this investigation was to characterize the DS1 prototype optical parameters. For this purpose the real and the theoretical flux distribution was calculated on a target placed at the focal length and a comparison between them reported about the value of some relevant parameters. The theoretical flux distribution was obtained by photogrammetry technique and ray tracing tools; the real flux distribution was measured by photographic flux mapping technique of lunar images. The results comparison showed that the dish surface had an average optical error of 2.5mrad (it includes errors due to deviation of surface normal vector and the effect of the specularity, but it does not include the sun shape error) and an estimated spillage value of 7%, for this geometry

Detection of selection signatures in farmed coho salmon (Oncorhynchus kisutch) using dense genome-wide information

Animal domestication and artificial selection give rise to gradual changes at the genomic level in populations. Subsequent footprints of selection, known as selection signatures or selective sweeps, have been traced in the genomes of many animal livestock species by exploiting variation in linkage disequilibrium patterns and/or reduction of genetic diversity. Domestication of most aquatic species is recent in comparison with land animals, and salmonids are one of the most important fish species in aquaculture. Coho salmon (Oncorhynchus kisutch), cultivated primarily in Chile, has been subjected to breeding programs to improve growth, disease resistance traits, and flesh color. This study aimed to identify selection signatures that may be involved in adaptation to culture conditions and traits of productive interest. To do so, individuals of two domestic populations cultured in Chile were genotyped with 200 thousand SNPs, and analyses were conducted using iHS, XP-EHH and CLR. Several signatures of selection on different chromosomal regions were detected across both populations. Some of the identified regions under selection contained genes such anapc2, alad, chp2 and myn, which have been previously associated with body weight in Atlantic salmon, or sec24d and robo1, which have been associated with resistance to Piscirickettsia salmonis in coho salmon. Findings in our study can contribute to an integrated genome-wide map of selection signatures, to help identify the genetic mechanisms of phenotypic diversity in coho salmon

A systematic study of spin-dependent recombination in GaAs1−x_{1-x}Nx_x as a function of nitrogen content

A systematic study of spin-dependent recombination (SDR) under steady-state optical pumping conditions in dilute nitride semiconductors as a function of nitrogen content is reported. The alloy content is determined by a fit of the photoluminescence (PL) intensity using a Roosbroeck-Shockley relation and verified by a study of the GaN-like LO$_2$ phonon peak in a Raman spectroscopy map. PL spectra taken from alloys of the form GaAs$_{1-x}$N$_x$ where $0.022 < x < 0.036$ exhibit PL intensity increases when switching from a linearly- to a circularly-polarized pump up to a factor of 5 for $x = 0.022$. This work used a 1.39 eV laser with a radius of 0.6 $\mu$m. The observed SDR ratio monotonically decreases with increasing $x$, reaching 1.5 for $x = 0.036$. Moreover, the excitation power required to obtain maximum SDR systematically increases with increasing $x$, varying from 0.6 mW for $x = 0.022$ to 15 mW for $x = 0.036$. These observations are consistent with an increase in the density of electronically active defects with increasing nitrogen content, both those responsible for the SDR as well as other, standard Shockley-Read-Hall (SRH) centers.Comment: 11 pages, 5 figures; work presented at the International Conference on the Physics of Semiconductors, Sydney, 202

Characterization of a jelly of Calendula officinalis L. at 1% for stomatological use

Introducción: La Calendula officinalis L. es una de las especies vegetales más utilizadas en el tratamiento de enfermedades periodontales. Objetivo: Determinar preliminarmente los parámetros de calidad de la jalea de Calendula officinalis L. al 1% para uso estomatológico. Métodos: Se elaboraron 18 formulaciones utilizando como agente gelificante carboximetilcelulosa (CMC) e hidroxipropilmetilcelulosa (HPMC), empleando el método de incorporación. A las mismas se le determinaron los parámetros de calidad y se seleccionaron las cuatro con mejores parámetros tecnológicos para evaluar el grado de aceptación sensorial por parte de un comité de expertos. Resultados: Las formulaciones con HPMC fueron las que presentaron mejores características organolépticas y pH aceptable para su aplicación sobre la mucosa bucal; así como un área de extensibilidad óptimo, lo que permitió que fueran seleccionadas para realizar el análisis sensorial. Conclusión: Se establecieron preliminarmente los parámetros de calidad de la jalea Calendula officinalis L. al 1% siendo seleccionada la formulación codificada como HPMC 6 por presentar olor característico al extracto blando, color ámbar tenue, homogéneo y con brillo, sabor agradable, no presentar grumos ni arenosidad, área de extensibilidad de 66.96±0.91cm2, pH de 4.9 y mayor aceptabilidad sensorial.Introduction: Calendula officinalis L. is one of the plant species most used in the treatment of periodontal diseases. Objective: To determine preliminarily the quality parameters of Calendula officinalis L. jelly at 1% for stomatological use. Methods: 18 formulations were prepared using carboxymethylcellulose (CMC) and hydroxypropylmethylcellulose (HPMC) as the gelling agent, using the incorporation method. The quality parameters were determined selecting the four formulations with better technological parameters to evaluate sensory acceptance by a committee of experts. Results: The HPMC formulations presented better organoleptic characteristics and acceptable pH for its application on the buccal mucosa; as well as an area of optimal extensibility, which allowed them to be selected to carry out the sensory analysis. Conclusion: The quality parameters of the Calendula officinalis L. 1% jelly were preliminarily established the formulation encoded as HPMC 6 is selected for presenting characteristic odor to the soft extract, amber color subdued, homogeneous and glossy, pleasant taste, no lumps or grit, area of extensibility of 66.96 ± 0.91cm2, pH of 4.9 and greater sensory acceptability

Design and in vitro effectiveness evaluation of Echium amoenum extract loaded in bioadhesive phospholipid vesicles tailored for mucosal delivery

The Echium amoenum Fisch. and C.A. Mey. (E. amoenum) is an herb native from Iranian shrub, and its blue-violet flowers are traditionally used as medical plants. In the present study, an antioxidant phytocomplex was extracted from the flowers of E. amoenum by ultrasounds-assisted hydroalcoholic maceration. The main components, contained in the extract, have been detected using HPLC-DAD, and rosmarinic acid was found to be the most abundant. The antioxidant power of the extract along with the phenolic content were measured using colorimetric assays. The extract was loaded in liposomes, which were enriched adding different bioadhesive polymers (i.e., mucin, xanthan gum and carboxymethyl cellulose sodium salt) individually or in combination. The main physico-chemical properties (i.e. size, size distribution, surface charge) of the prepared vesicles were measured as well as their stability on storage. The viscosity of dispersion and the ability of vesicles to interact with mucus were evaluated measuring their stability in a mucin dispersion and mobility in a mucin film. The biocompatibility and the ability of the formulations to protect keratinocytes from damages caused by hydrogen peroxide and to promote the cell migration were measured in vitro

Technologies for managing the health of older adults with multiple chronic conditions: A systematic literature review

Multimorbidity is defined as the presence of two or more chronic medical conditions in a person, whether physical, mental or long-term infectious diseases. This is especially common in older populations, affecting their quality of life and emotionally impacting their caregivers and family. Technology can allow for monitoring, managing, and motivating older adults in their self-care, as well as supporting their caregivers. However, when several conditions are present at once, it may be necessary to manage several types of technologies, or for technology to manage the interaction between conditions. This work aims to understand and describe the technologies that are used to support the management of multimorbidity for older adults. We conducted a systematic review of ten years of scientific literature from four online databases. We reviewed a corpus of 681 research papers, finally including 25 in our review. The technologies used most frequently by older adults with multimorbidity are mobile applications and websites, and they are mostly focused on communication and connectivity. We then propose opportunities for future research on addressing the challenges in the management of several simultaneous health conditions, potentially creating a better approach than managing each condition as if it were independent

Amebiasis in HIV-1-Infected Japanese Men: Clinical Features and Response to Therapy

Invasive amebic diseases caused by Entamoeba histolytica are increasing among men who have sex with men and co-infection of ameba and HIV-1 is an emerging problem in developed East Asian countries. To characterize the clinical and epidemiological features of invasive amebiasis in HIV-1 patients, the medical records of 170 co-infected cases were analyzed retrospectively, and E. histolytica genotype was assayed in 14 cases. In this series of HIV-1-infected patients, clinical presentation of invasive amebiasis was similar to that described in the normal host. High fever, leukocytosis and high CRP were associated with extraluminal amebic diseases. Two cases died from amebic colitis (resulting in intestinal perforation in one and gastrointestinal bleeding in one), and three cases died from causes unrelated to amebiasis. Treatment with metronidazole or tinidazole was successful in the other 165 cases. Luminal treatment was provided to 83 patients following metronidazole or tinidazole treatment. However, amebiasis recurred in 6 of these, a frequency similar to that seen in patients who did not receive luminal treatment. Recurrence was more frequent in HCV-antibody positive individuals and those who acquired syphilis during the follow-up period. Various genotypes of E. histolytica were identified in 14 patients but there was no correlation between genotype and clinical features. The outcome of metronidazole and tinidazole treatment of uncomplicated amebiasis was excellent even in HIV-1-infected individuals. Luminal treatment following metronidazole or tinidazole treatment does not reduce recurrence of amebiasis in high risk populations probably due to amebic re-infection

A Comparison of the Effectiveness of Cocos nucifera (Coconut) Water as a Rooting Hormone in a Hydroponic and Conventional Set-up in Growing Ocimum basilicum (Basil)

Food shortage is still a problem in the Philippines since millions of people may be classified as undernourished. Efforts to augment the insufficiency include developing an efficient planting method as a source of food. This experimental study tested the effectiveness of coconut water as a rooting hormone on hydroponically and conventionally grown basil plants by measuring the height, fresh weight, leaf length, and root length for three weeks, which also served as the dependent variables. Consequently, two (2) hydroponic set-ups and two (2) conventional set-ups utilize a randomized block design. The set-ups containing coconut water served as the independent variables, while the ones without served as the control. Before the data gathering procedures, the containers were sterilized, the tap water was exposed to sunlight, and the basil seeds were soaked in coconut water. Six hours later, the seeds were planted. After three weeks, the leaf length and root length were measured using a digital caliper, while the height and weight were measured using a standard ruler and digital scale. The nutrient solution and pH level were also monitored. Data was analyzed using two-way ANOVA for leaf length and plant weight, while one-way ANOVA was used for plant height and root length. In addition, a post-hoc test was used for variables that had a significant effect. Descriptive statistics was used to analyze the mean. The hydroponic setup was effective on producing a higher yield for root length (M=112), while the conventional setup was effective on plant height (M=99.7) and leaf length (M=44.1). While the intervention had no significant contribution (p\u3e0.05), hydroponics as an alternative planting technique still has potential in the agricultural sector