100 research outputs found
Ripple structure of crystalline layers in ion-beam-induced Si wafers
Ion-beam-induced ripple formation in Si wafers was studied by two complementary surface sensitive techniques, namely atomic force microscopy (AFM) and depth-resolved X-ray grazing incidence diffraction (GID). The formation of ripple structure at high doses (~7×1017 ions/cm2), starting from initiation at low doses (~1×1017 ions/cm2) of ion beam, is evident from AFM, while that in the buried crystalline region below a partially crystalline top layer is evident from GID study. Such ripple structure of crystalline layers in a large area formed in the subsurface region of Si wafers is probed through a nondestructive technique. The GID technique reveals that these periodically modulated wavelike buried crystalline features become highly regular and strongly correlated as one increases the Ar ion-beam energy from 60 to 100 keV. The vertical density profile obtained from the analysis of a Vineyard profile shows that the density in the upper top part of ripples is decreased to about 15% of the crystalline density. The partially crystalline top layer at low dose transforms to a completely amorphous layer for high doses, and the top morphology was found to be conformal with the underlying crystalline ripple
In-situ measurements of dendrite tip shape selection in a metallic alloy
The size and shape of the primary dendrite tips determine the principal
length scale of the microstructure evolving during solidification of alloys.
In-situ X-ray measurements of the tip shape in metals have been unsuccessful so
far due to insufficient spatial resolution or high image noise. To overcome
these limitations, high-resolution synchrotron radiography and advanced image
processing techniques are applied to a thin sample of a solidifying Ga-35wt.%In
alloy. Quantitative in-situ measurements are performed of the growth of
dendrite tips during the fast initial transient and the subsequent steady
growth period, with tip velocities ranging over almost two orders of magnitude.
The value of the dendrite tip shape selection parameter is found to be
, which suggests an interface energy anisotropy of
for the present Ga-In alloy. The non-axisymmetric
dendrite tip shape amplitude coefficient is measured to be ,
which is in excellent agreement with the universal value previously established
for dendrites.Comment: 9 pages, 6 figures, submitted to "Physical Reviews Materials
Bandgap narrowing in Mn doped GaAs probed by room-temperature photoluminescence
The electronic band structure of the (Ga,Mn)As system has been one of the
most intriguing problems in solid state physics over the past two decades.
Determination of the band structure evolution with increasing Mn concentration
is a key issue to understand the origin of ferromagnetism. Here we present room
temperature photoluminescence and ellipsometry measurements of
Ga_{100%-x}Mn_{x}As alloy. The up-shift of the valence-band is proven by the
red shift of the room temperature near band gap emission from the
Ga_{100%-x}Mn_{x}As alloy with increasing Mn content. It is shown that even a
doping by 0.02 at.% of Mn affects the valence-band edge and it merges with the
impurity band for a Mn concentration as low as 0.6 at.%. Both X-ray diffraction
pattern and high resolution cross-sectional TEM images confirmed full
recrystallization of the implanted layer and GaMnAs alloy formation.Comment: 24 pages, 7 figures, accepted at Phys. Rev. B 201
Recommended from our members
Phenomenology of iron-assisted ion beam pattern formation on Si(001)
Pattern formation on Si(001) through 2 keV Kr+ ion beam erosion of Si(001) at an incident angle of # = 30° and in the presence of sputter codeposition or co-evaporation of Fe is investigated by using in situ scanning tunneling microscopy, ex situ atomic force microscopy and electron microscopy. The phenomenology of pattern formation is presented, and experiments are conducted to rule out or determine the processes of relevance in ion beam pattern formation on Si(001) with impurities. Special attention is given to the determination of morphological phase boundaries and their origin. Height fluctuations, local flux variations, induced chemical inhomogeneities, silicide formation and ensuing composition-dependent sputtering are found to be of relevance for pattern formation
Phenomenology of iron-assisted ion beam pattern formation on Si(001)
Pattern formation on Si(001) through 2 keV Kr+ ion beam erosion of Si(001) at an incident angle of # = 30° and in the presence of sputter codeposition or co-evaporation of Fe is investigated by using in situ scanning tunneling microscopy, ex situ atomic force microscopy and electron microscopy. The phenomenology of pattern formation is presented, and experiments are conducted to rule out or determine the processes of relevance in ion beam pattern formation on Si(001) with impurities. Special attention is given to the determination of morphological phase boundaries and their origin. Height fluctuations, local flux variations, induced chemical inhomogeneities, silicide formation and ensuing composition-dependent sputtering are found to be of relevance for pattern formation
Microstructural anisotropy at the ion-induced rippled amorphouscrystalline interface of silicon
Using grazing-incidence X-ray scattering technique the authors have investigated the evolution of the damage profile of the transition layer between the ion-induced ripplelike pattern on top surface and the ripples at buried crystalline interface in silicon created after irradiation with 60 keV Ar+ ions under 60°. The transition layer consists of a defect-rich crystalline part and a complete amorphous part. The crystalline regions are highly strained but relaxed for low dose and high dose irradiations, respectively. The appearance of texture in both cases shows that the damage of the initial crystalline structure by the ion bombardment takes place along particular crystallographic directions
Recommended from our members
Iron-assisted ion beam patterning of Si(001) in the crystalline regime
We present ion beam erosion experiments on Si(001) with simultaneous sputter co-deposition of steel at 660 K. At this temperature, the sample remains within the crystalline regime during ion exposure and pattern formation takes place by phase separation of Si and iron-silicide. After an ion fluence of F ≈ 5.9×10 21 ions m -2, investigations by atomic force microscopy and scanning electron microscopy identify sponge, segmented wall and pillar patterns with high aspect ratios and heights of up to 200 nm. Grazing incidence x-ray diffraction and transmission electron microscopy reveal the structures to be composed of polycrystalline iron-silicide. The observed pattern formation is compared to that in the range of 140-440K under otherwise identical conditions, where a thin amorphous layer forms due to ion bombardment
Rapid Synthesis of Sub-10 nm Hexagonal NaYF4-Based Upconverting Nanoparticles using Therminol® 66
We report a simple one-pot method for the rapid preparation of sub-10 nm pure hexagonal (β-phase) NaYF4-based upconverting nanoparticles (UCNPs). Using Therminol® 66 as a co-solvent, monodisperse UCNPs could be obtained in unusually short reaction times. By varying the reaction time and reaction temperature, it was possible to control precisely the particle size and crystalline phase of the UCNPs. The upconversion (UC) luminescence properties of the nanocrystals were tuned by varying the concentrations of the dopants (Nd3+ and Yb3+ sensitizer ions and Er3+ activator ions). The size and phase-purity of the as-synthesized core and core–shell nanocrystals were assessed by using complementary transmission electron microscopy, dynamic light scattering, X-ray diffraction, and small-angle X-ray scattering studies. In-depth photophysical evaluation of the UCNPs was pursued by using steady-state and time-resolved luminescence spectroscopy. An enhancement in the UC intensity was observed if the nanocrystals, doped with optimized concentrations of lanthanide sensitizer/activator ions, were further coated with an inert/active shell. This was attributed to the suppression of surface-related luminescence quenching effects
- …