54,225 research outputs found
Description and preliminary studies of a computer drawn instrument landing approach display
A computer drawn instrument landing approach display, which shows a box located on the desired path, aligned with the path, and moving along the path at a selected distance ahead of the aircraft, was examined. Vertical and lateral displacements from the desired path and aircraft altitude information are used as inputs to the computer. A preliminary simulation study with pilot subjects has shown that the pilots find the display very easy to use, and they achieved better performance scores with the box display than with a cross pointer instrument landing display
Three-dimensional elastoplastic stress analysis of unidirectional boron/aluminum composites
A three dimensional elastoplastic finite element micromechanical model was developed to study the state of stress around a broken fibers in a unidirectional composite. A boron/aluminum composite consisting of 50 percent by volume of fibers in a square array and subjected to an axial loading is taken as a specific example. This loading in the fiber direction is applied in small increments, by prescribing increments of boundary displacement, until the first failure occurs. The effect of reduced material properties of the aluminum matrix material at elevated temperature is also studied. The results are presented in the form of stress contours and stress-strain plots
Delamination micromechanics analysis
A three-dimensional finite element analysis was developed which includes elastoplastic, orthotropic material response, and fracture initiation and propagation. Energy absorption due to physical failure processes characteristic of the heterogeneous and anisotropic nature of composite materials is modeled. A local energy release rate in the presence of plasticity was defined and used as a criterion to predict the onset and growth of cracks in both micromechanics and macromechanics analyses. This crack growth simulation technique is based upon a virtual crack extension method. A three-dimensional finite element micromechanics model is used to study the effects of broken fibers, cracked matrix and fiber-matrix debond on the fracture toughness of the unidirectional composite. The energy release rates at the onset of unstable crack growth in the micromechanics analyses are used as critical energy release rates in the macromechanics analysis. This integrated micromechanical and macromechanical fracture criterion is shown to be very effective in predicting the onset and growth of cracks in general multilayered composite laminates by applying the criterion to a single-edge notched graphite/epoxy laminate subjected to implane tension normal to the notch
Tachyon condensation and off-shell gravity/gauge duality
We investigate quasilocal tachyon condensation by using gravity/gauge
duality. In order to cure the IR divergence due to a tachyon, we introduce two
regularization schemes: AdS space and a d=10 Schwarzschild black hole in a
cavity. These provide stable canonical ensembles and thus are good candidates
for the endpoint of tachyon condensation. Introducing the Cardy-Verlinde
formula, we establish the on-shell gravity/gauge duality. We propose that the
stringy geometry resulting from the off-shell tachyon dynamics matches onto the
off-shell AdS black hole, where "off-shell" means non-equilibrium
configuration. The instability induced by condensation of a tachyon behaves
like an off-shell black hole and evolves toward a large stable black hole. The
off-shell free energy and its derivative (-function) are used to show
the off-shell gravity/gauge duality for the process of tachyon condensation.
Further, d=10 Schwarzschild black hole in a cavity is considered for the
Hagedorn transition as a possible explanation of the tachyon condensation.Comment: 28 pages, 13 eps figures, version to appear in IJMP
Coulomb Gap: How a Metal Film Becomes an Insulator
Electron tunneling measurements of the density of states (DOS) in ultra-thin
Be films reveal that a correlation gap mediates their insulating behavior. In
films with sheet resistance the correlation singularity appears
as the usual perturbative zero bias anomaly (ZBA) in the DOS. As R is
increased further, however, the ZBA grows and begins to dominate the DOS
spectrum. This evolution continues until a non-perturbative
Efros-Shklovskii Coulomb gap spectrum finally emerges in the highest R films.
Transport measurements of films which display this gap are well described by a
universal variable range hopping law .Comment: 4 figure
Solving non-perturbative flow equations
Non-perturbative exact flow equations describe the scale dependence of the
effective average action. We present a numerical solution for an approximate
form of the flow equation for the potential in a three-dimensional N-component
scalar field theory. The critical behaviour, with associated critical
exponents, can be inferred with good accuracy.Comment: Latex, 14 pages, 2 uuencoded figure
Creep of plasma sprayed zirconia
Specimens of plasma-sprayed zirconia thermal barrier coatings with three different porosities and different initial particle sizes were deformed in compression at initial loads of 1000, 2000, and 3500 psi and temperatures of 1100 C, 1250 C, and 1400 C. The coatings were stabilized with lime, magnesia, and two different concentrations of yttria. Creep began as soon as the load was applied and continued at a constantly decreasing rate until the load was removed. Temperature and stabilization had a pronounced effect on creep rate. The creep rate for 20% Y2O3-80% ZrO2 was 1/3 to 1/2 that of 8% Y2O3-92% ZrO2. Both magnesia and calcia stabilized ZrO2 crept at a rate 5 to 10 times that of the 20% Y2O3 material. A near proportionality between creep rate and applied stress was observed. The rate controlling process appeared to be thermally activated, with an activation energy of approximately 100 cal/gm mole K. Creep deformation was due to cracking and particle sliding
Extensions of the space trajectories error analysis programs
A generalized covariance analysis technique which permits the study of the sensitivity of linear estimation algorithms to errors in a priori statistics has been developed and programed. Several sample cases are presented to illustrate the use of this technique. Modifications to the Simulated Trajectories Error Analysis Program (STEAP) to enable targeting a multiprobe mission of the Planetary Explorer type are discussed. The logic for the mini-probe targeting is presented. Finally, the initial phases of the conversion of the Viking mission Lander Trajectory Reconstruction (LTR) program for use on Venus missions is discussed. An integrator instability problem is discussed and a solution proposed
Light curves for bump Cepheids computed with a dynamically zoned pulsation code
The dynamically zoned pulsation code developed by Castor, Davis, and Davison was used to recalculate the Goddard model and to calculate three other Cepheid models with the same period (9.8 days). This family of models shows how the bumps and other features of the light and velocity curves change as the mass is varied at constant period. The use of a code that is capable of producing reliable light curves demonstrates that the light and velocity curves for 9.8 day Cepheid models with standard homogeneous compositions do not show bumps like those that are observed unless the mass is significantly lower than the 'evolutionary mass.' The light and velocity curves for the Goddard model presented here are similar to those computed independently by Fischel, Sparks, and Karp. They should be useful as standards for future investigators
- …