64,219 research outputs found
Single-Cycle Impulse from Detonation Tubes with Nozzles
Experiments measuring the single-cycle impulse from detonation tubes with nozzles were conducted by hanging the tubes in a ballistic pendulum arrangement within a large tank. The detonation-tube nozzle and surrounding tank were initially filled with air between 1.4 and 100 kPa in pressure simulating high-altitude conditions. A stoichiometric ethylene–oxygen mixture at an initial pressure of 80 kPa filled the constant-diameter portion of the tube. Four diverging nozzles and six converging–diverging nozzles were tested. Two regimes of nozzle operation were identified, depending on the environmental pressure. Near sea-level conditions, unsteady gas-dynamic effects associated with the mass of air contained in the nozzle increase the impulse as much as 72% for the largest nozzle tested over the baseline case of a plain tube. Near vacuum conditions, the nozzles quasi-steadily expand the flow, increasing the impulse as much as 43% for the largest nozzle tested over the baseline case of a plain tube. Competition between the unsteady and quasi-steady-flow processes in the nozzle determine the measured impulse as the environmental pressure varies
Thermal and Catalytic Cracking of JP-10 for Pulse Detonation Engine Applications
Practical air-breathing pulse detonation engines (PDE) will be based on storable liquid hydrocarbon fuels such as JP-10 or Jet A. However, such fuels are not optimal for PDE operation due to the high energy input required for direct initiation of a detonation and the long deflagration-to-detonation transition times associated with low-energy initiators. These effects increase cycle time and reduce time-averaged thrust, resulting in a significant loss of performance. In an effort to utilize such conventional liquid fuels and still maintain the performance of the lighter and more sensitive hydrocarbon fuels, various fuel modification schemes such as thermal and catalytic cracking have been investigated.
We have examined the decomposition of JP-10 through thermal and catalytic cracking mechanisms at elevated temperatures using a bench-top reactor system. The system has the capability to vaporize liquid fuel at precise flowrates while maintaining the flow path at elevated temperatures and pressures for extended periods of time. The catalytic cracking tests were completed utilizing common industrial zeolite catalysts installed in the reactor. A gas chromatograph with a capillary column and flame ionization detector, connected to the reactor output, is used to speciate the reaction products. The conversion rate and product compositions were determined as functions of the fuel metering rate, reactor temperature, system backpressure, and zeolite type.
An additional study was carried out to evaluate the feasibility of using pre-mixed rich combustion to partially oxidize JP-10. A mixture of partially oxidized products was initially obtained by rich combustion in JP-10 and air mixtures for equivalence ratios between 1 and 5. Following the first burn, air was added to the products, creating an equivalent stoichiometric mixture. A second burn was then carried out. Pressure histories and schlieren video images were recorded for both burns. The results were analyzed by comparing the peak and final pressures to idealized thermodynamic predictions
Effect of Porous Thrust Surfaces on Detonation Transition and Detonation Tube Impulse
As pulse detonation engine development matures, it becomes increasingly important to consider how practical details such as the implementation of valves and nozzles will affect performance. Inlet valve timing and valveless inlet designs may result in flow of products back upstream and, consequently, reduction in impulse over the ideal case. Although proper inlet design or operation under flowing conditions may minimize these losses, our study addresses the worst-case effect that a porous thrust surface may have on the measured impulse. A series of single-cycle tests have been carried out to measure the impulse in stoichiometric ethylene–oxygen mixtures, initially between 20 and 100 kPa, in a detonation tube with a porous thrust surface. The tested thrust surfaces had blockage ratios ranging from completely solid (100% blockage ratio) to completely open (0% blockage ratio). A 76% loss in impulse was observed with a thrust surface blockage ratio of 52% at an initial pressure of 100 kPa. The time to detonation transition was found to be more dependent on the mixture’s initial pressure than on the thrust surface blockage ratio. A model of the impulse in detonation tubes with porous thrust surfaces was developed
Detonation Tube Impulse in Subatmospheric Environments
Thrust from a multicycle pulse detonation engine operating at practical flight altitudes will vary with surrounding environment pressure.We have carried out the first experimental study using a detonation tube hung in a ballistic pendulum arrangement within a large pressure vessel to determine the effect that the environment has on the single-cycle impulse. Air pressure decreased below 100 kPa, whereas initial pressure of the stoichiometric ethylene–oxygen mixture inside the tube varied between 100 and 30 kPa. The original impulse model (Wintenberger et al., Journal of Propulsion and Power, Vol. 19, No. 1, 2002, pp. 22–38) was modified to predict the observed increase in impulse and blowdown time as the environmental pressure decreased below 1 atm. Comparisons between the impulse from detonation tubes and ideal steady-flow rockets indicate incomplete expansion of the detonation tube exhaust, resulting in a 37% difference in impulse at a pressure ratio (ratio of pressure behind the Taylor wave to environmental pressure) of 100
Impulse Correlation for Partially Filled Detonation Tubes
The effect of nozzles on the impulse obtained from a detonation tube of circular cross section has been the focus of many experimental and numerical studies. In these cases, the simplified detonation tube is closed at one end (forming the thrust surface) and open at the other end, enabling the attachment of an extension. A flowfield analysis of a detonation tube with an extension requires considering unsteady wave interactions making analytical and accurate numerical predictions difficult (especially in complicated extension geometries). To predict the impulse obtained from a detonation tube with an extension (considered a partially filled detonation tube), we utilize data from other researchers to generate a partial-fill correlation
Effect of Deflagration-to-Detonation Transition on Pulse Detonation Engine Impulse
A detonation tube was built to study the deflagration-to-detonation transition (DDT) process and the impulse generated when combustion products exhaust into the atmosphere. The reactants used were stoichiometric ethylene and oxygen mixture with varying amounts of nitrogen present as diluent. The effects of varying the initial pressure from 30 kPa to 100 kPa were studied, as were the effects of varying the diluent concentration from 0% to 73.8% of the total mixture. Measurements were carried out with the tube free of obstacles and with three different obstacle configurations. Each obstacle configuration had a blockage ratio of 0.43.
It was found that the inclusion of obstacles dramatically lowered the DDT times and distances as compared to the no obstacle configuration. The obstacles were found to be particularly effective at inducing DDT in mixtures with low pressures and with high amounts of diluent. At the lowest pressures tested (30 kPa), obstacles reduced the DDT time and distance to approximately 12.5% of the no obstacle configuration values. The obstacles also allowed DDT to occur in mixture compositions of up to 60% diluent, while DDT was not achieved with more than 30% diluent in the no obstacle configuration.
A ballistic pendulum arrangement was utilized, enabling direct measurement of the impulse by measuring the tube's deflection. Additional means of impulse comparison consisted of integrating the pressure over the front wall of the tube. Impulse measurements were then compared with a theoretical model and were found to fit well cases that did not contain internal obstacles.
The inclusion of obstacles allowed DDT to occur in mixtures with high amounts of diluent where DDT was not observed to occur in the cases without obstacles. Roughly 100% more impulse was produced in the obstacle configurations as compared to the no obstacle configuration under these conditions. In instances where DDT occurred in the no obstacle configuration, the use of obstacle configurations lowered the impulse produced by an average of 25%. For cases where no obstacles were used and DDT occurred, the pressure derived impulses (pressure impulse) and impulses determined from the ballistic pendulum (ballistic impulses) are similar. For cases were obstacle configurations were tested, pressure impulses were more than 100% higher on average than ballistic impulses. This difference exists because the pressure model neglects drag due to the obstacle configurations
Analytical Model for the Impulse of Single-Cycle Pulse Detonation Tube
An analytical model for the impulse of a single-cycle pulse detonation tube has been developed and validated against experimental data. The model is based on the pressure history at the thrust surface of the detonation tube. The pressure history is modeled by a constant pressure portion, followed by a decay due to gas expansion out of the tube. The duration and amplitude of the constant pressure portion is determined by analyzing the gasdynamics of the self-similar flow behind a steadily moving detonation wave within the tube. The gas expansion process is modeled using dimensional analysis and empirical observations. The model predictions are validated against direct experimental measurements in terms of impulse per unit volume, specific impulse, and thrust. Comparisons are given with estimates of the specific impulse based on numerical simulations. Impulse per unit volume and specific impulse calculations are carried out for a wide range of fuel–oxygen–nitrogen mixtures (including aviation fuels) of varying initial pressure, equivalence ratio, and nitrogen dilution. The effect of the initial temperature is also investigated. The trends observed are explained using a simple scaling analysis showing the dependency of the impulse on initial conditions and energy release in the mixture
Recommended from our members
Application of thermoelectric aging models to polymeric insulation in cable geometry
The life expressions of models of insulation ageing are functions of temperature and field as well as material parameters. A methodology is presented that allows these models to be applied to a cable geometry in which there is a radial variation of both field and temperature. In this way material parameters can be extracted from cable data. The methodology is illustrated using one such model and the parameters deduced from cable failure distributions are compared with those obtained for thin films. This comparison allows conclusions to be drawn about how the ageing process affects specimens of the same material with different volumes
- …