Generation of the second-harmonic Bessel beams via nonlinear Bragg diffraction

We generate conical second-harmonic radiation by transverse excitation of a two-dimensional annular periodically-poled nonlinear photonic structure with a fundamental Gaussian beam. We show that these conical waves are the far-field images of the Bessel beams generated in a crystal by parametric frequency conversion assisted by nonlinear Bragg diffraction.Comment: 4 pages, 5 figures. submitte

Fractoluminescence characterization of the energy dissipated during fast fracture of glass

Fractoluminescence experiments are performed on two kinds of silicate glasses. All the light spectra collected during dynamic fracture reveal a black body radiator behaviour, which is interpreted as a crack velocity-dependent temperature rise close to the crack tip. Crack velocities are estimated to be of the order of 1300 m.s$^{-1}$ and fracture process zones are shown to extend over a few nanometers.Comment: Accepted for publication in Europhysics Letters; 5 pages; 4 figure

Status of the LHCb magnet system

The LHCb experiment focuses on the precision measurement of CP violation and rare decays in the B-meson system. It plans to operate with an average luminosity of $2\times 10^{32}$~cm$^{-2}$s$~^{-1}$, which should be obtained from the beginning of the LHC operation. The LHCb detector exploits the forward region of the pp collisions at the LHC collider. It requires a single-arm spectrometer for the separation and momentum measurement of the charged particles with a large dipole magnet of a free aperture of $\pm 300$~mrad horizontally and $\pm 250$~mrad vertically. The magnet is designed for a total integrated field of 4~Tm. The pole gap is 2.2 to 3.5~m vertically (the direction of the field) and 2.6 to 4.2~m horizontally. The overall length of the magnet (in beam direction) is 5~m and its total weight about 1500~t. The power dissipation in the aluminium coils will be 4.2~MW. The magnet yoke is constructed from low carbon steel plates of 100~mm thickness. The maximum weight of one plate does not exceed 25~t. The coils are wound from large hollow aluminium conductor of $50~{\rm mm}\times 50~{\rm mm}$ cross-section with a central cooling channel of 25~mm diameter for the pressurized demineralized water. Each of the two coils is composed of 15~monolayer pancakes of 15~turns per pancake. To reach good field quality the coils are bent by 45$^\circ$ towards the gap along the horizontal aperture of $\pm 300$~mrad and the pole pieces have large shims. The underlying magnet design, its present status and milestones will be reviewed

PILOT: a balloon-borne experiment to measure the polarized FIR emission of dust grains in the interstellar medium

Future cosmology space missions will concentrate on measuring the polarization of the Cosmic Microwave Background, which potentially carries invaluable information about the earliest phases of the evolution of our universe. Such ambitious projects will ultimately be limited by the sensitivity of the instrument and by the accuracy at which polarized foreground emission from our own Galaxy can be subtracted out. We present the PILOT balloon project which will aim at characterizing one of these foreground sources, the polarization of the dust continuum emission in the diffuse interstellar medium. The PILOT experiment will also constitute a test-bed for using multiplexed bolometer arrays for polarization measurements. We present the results of ground tests obtained just before the first flight of the instrument.Comment: 17 pages, 13 figures. Presented at SPIE, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VII. To be published in Proc. SPIE volume 915

Impact of particles on the Planck HFI detectors: Ground-based measurements and physical interpretation

The Planck High Frequency Instrument (HFI) surveyed the sky continuously from August 2009 to January 2012. Its noise and sensitivity performance were excellent, but the rate of cosmic ray impacts on the HFI detectors was unexpectedly high. Furthermore, collisions of cosmic rays with the focal plane produced transient signals in the data (glitches) with a wide range of characteristics. A study of cosmic ray impacts on the HFI detector modules has been undertaken to categorize and characterize the glitches, to correct the HFI time-ordered data, and understand the residual effects on Planck maps and data products. This paper presents an evaluation of the physical origins of glitches observed by the HFI detectors. In order to better understand the glitches observed by HFI in flight, several ground-based experiments were conducted with flight-spare HFI bolometer modules. The experiments were conducted between 2010 and 2013 with HFI test bolometers in different configurations using varying particles and impact energies. The bolometer modules were exposed to 23 MeV protons from the Orsay IPN TANDEM accelerator, and to $^{241}$Am and $^{244}$Cm $\alpha$-particle and $^{55}$Fe radioactive X-ray sources. The calibration data from the HFI ground-based preflight tests were used to further characterize the glitches and compare glitch rates with statistical expectations under laboratory conditions. Test results provide strong evidence that the dominant family of glitches observed in flight are due to cosmic ray absorption by the silicon die substrate on which the HFI detectors reside. Glitch energy is propagated to the thermistor by ballistic phonons, while there is also a thermal diffusion contribution. The implications of these results for future satellite missions, especially those in the far-infrared to sub-millimetre and millimetre regions of the electromagnetic spectrum, are discussed.Comment: 11 pages, 13 figure

In-flight calibration and verification of the Planck-LFI instrument

In this paper we discuss the Planck-LFI in-flight calibration campaign. After a brief overview of the ground test campaigns, we describe in detail the calibration and performance verification (CPV) phase, carried out in space during and just after the cool-down of LFI. We discuss in detail the functionality verification, the tuning of the front-end and warm electronics, the preliminary performance assessment and the thermal susceptibility tests. The logic, sequence, goals and results of the in-flight tests are discussed. All the calibration activities were successfully carried out and the instrument response was comparable to the one observed on ground. For some channels the in-flight tuning activity allowed us to improve significantly the noise performance.Comment: Long technical paper on Planck LFI in flight calibration campaign: 109 pages in this (not final) version, 100 page in the final JINST versio

The Planck High Frequency Instrument, a 3rd generation CMB experiment, and a full sky submillimeter survey

The High Frequency Instrument (HFI) of Planck is the most sensitive CMB experiment ever planned. Statistical fluctuations (photon noise) of the CMB itself will be the major limitation to the sensitivity of the CMB channels. Higher frequency channels will measure galactic foregrounds. Together with the Low Frequency Instrument, this will make a unique tool to measure the full sky and to separate the various components of its spectrum. Measurement of the polarization of these various components will give a new picture of the CMB. In addition, HFI will provide the scientific community with new full sky maps of intensity and polarization at six frequencies, with unprecedented angular resolution and sensitivity. This paper describes the logics that prevailed to define the HFI and the performances expected from this instrument. It details several features of the HFI design that have not been published up to now.Comment: To be published in the proceedings of the workshop on "The Cosmic Microwave Background and its Polarization", New Astronomy Reviews, (eds., S. Hanany and R.A. Olive