A Check List of Maine Local Histories

A Check List of Maine Local Histories. Compiled by Almer J. Houston. Listing of Town Histories, Regimental Histories, County Histories, County Atlases, State Histories, State Atlases, Historical Societies, Collections of Historical and Genealogical Magazines, Ecclesiastical Histories and Statutes and Session Laws. A.J. Huston, 92 Exchange Street, Portland, Me., 1915.https://digitalcommons.usm.maine.edu/me_collection/1009/thumbnail.jp

Pseudo-binary phase diagram for Zr-based in situ ß phase composites

The pseudo-binary (quasi-equilibrium) phase diagram for Zr-based bulk metallic glasses with crystalline in situ precipitates (ß phase) has been constructed from high-temperature phase information and chemical composition analysis. The phase evolution was detected in situ by high-energy synchrotron x-ray diffraction followed by Rietveld analysis of the data for volume fraction estimation. The phase diagram delineates phase fields and allows the control of phase fractions. Combined with related previous work by the authors, this diagram offers a unique opportunity to control both the morphology and volume of the dendritic ß phase precipitates to enhance the properties of the composites

Significant elastic anisotropy in Ti1−x_{1-x}Alx_xN alloys

Strong compositional-dependent elastic properties have been observed theoretically and experimentally in Ti$_{1-x}$Al$_x$ N alloys. The elastic constant, C$_{11}$, changes by more than 50% depending on the Al-content. Increasing the Al-content weakens the average bond strength in the local octahedral arrangements resulting in a more compliant material. On the other hand, it enhances the directional (covalent) nature of the nearest neighbor bonds that results in greater elastic anisotropy and higher sound velocities. The strong dependence of the elastic properties on the Al-content offers new insight into the detailed understanding of the spinodal decomposition and age hardening in Ti$_{1-x}$Al$_x$N alloys.Comment: 3 figures, 3 page

In situ stress analysis of multilayer environmental barrier coatings

The biaxial stress and thermal expansion of multilayer doped-aluminosilicate environmental barrier coatings were measured in situ during cooling using microfocused high-energy X-rays in transmission. Coating stresses during cooling from 1000 °C were measured for as-sprayed and thermally cycled samples. In the as-sprayed state, tensile stresses as high as 75 MPa were measured in the doped-aluminosilicate topcoat at 375 °C, after which a drop in the stress occurred accompanied by through-thickness cracking of the two outermost layers. After thermally cycling the samples, the stress in the topcoat was reduced to approximately 50 MPa, and there was no drop in stress upon cooling. This stress reduction was attributed to a crystallographic phase transformation of the topcoat and the accompanying change in thermal expansion coefficient. The addition of a doped aluminosilicate to the mullite layer did not lower the stress in the topcoat, but may offer increased durability due to an increased compressive stress

Learning control of hearing aid parameter settings

In a hearing aid with a signal processor for signal processing in accordance with selected values of a set of parameters Θ, a method of automatic adjustment of a set z of the signal processing parameters Θ, using a set of learning parameters θ of the signal processing parameters Θ is provided, wherein the method includes extracting signal features u of a signal in the hearing aid, recording a measure r of an adjustment e made by the user of the hearing aid, modifying z by the equation z=u θ+r, and absorbing the user adjustment e in θ by the equation θN=Φ(u,r)+θP, wherein θN is the new values of the learning parameter set θ, θP is the previous values of the learning parameter set θ, and Φ is a function of the signal features u and the recorded adjustment measure r

Stresses in Ytterbium Silicate Multilayer Environmental Barrier Coatings

The internal stresses of plasma-sprayed multilayer ytterbium disilicate environmental barrier coatings were measured using microfocused high-energy X-rays in a transmission geometry. Stresses were measured for as-sprayed and ex-situ heat-treated ytterbium disilicate topcoats at room temperature and during in-situ heating and cooling experiments. In-situ loading experiments were also performed on the topcoat in order to establish its elastic constants. The ytterbium disilicate was found to have a relatively low coefficient of thermal expansion resulting in compressive stresses of approximately 100 MPa throughout the topcoat. In-situ heating experiments revealed a statistically significant stress relaxation in the ytterbium disilicate topcoat upon thermal cycling to temperatures above 1300°C, indicating the onset of stress relaxation but no cracks were observed in SEM micrographs. The stress states were also modeled using a numerical solution; measured stresses were found to be very close to the predicted stresses in ytterbium dilisicate topcoats, while the experimentally determined stresses in the intermediate layers were of much smaller magnitude than the calculated stresses

Effect of crystallite orientation and external stress on hydride precipitation and dissolution in Zr2.5%Nb

Thermal cycling of Zr2.5%Nb pressure tubes specimens containing ∼100 wt ppm H between room temperature and 400 °C produces the dissolution and re-precipitation of zirconium hydride, with a distinctive hysteresis between these two processes. In this work, we have found that the details of the precipitation and dissolution depend on the actual orientation of the α-Zr grains where hydride precipitation takes place. In situ synchrotron X-ray diffraction experiments during such thermal cycles have provided information about hydride precipitation specific to the two most important groups of α-Zr phase orientations, namely crystallites having c-axes parallel (mHoop) and tilted by ∼20° (mTilted) from the tube hoop direction. The results indicate that hydrides precipitate at slightly higher temperatures (∼5 °C), and dissolve at consistently higher temperatures (∼15 °C) in mTilted grains than in mHoop grains. Moreover, application of a tensile stress along the tube hoop direction results in two noticeable effects in hydride precipitation. Firstly, it shifts hydride precipitation towards higher temperatures, at a rate of ∼(0.08 ± 0.02) °C/MPa for hydrides precipitated in the mHoop grains. Secondly, it produces a redistribution of hydrogen between grains of different orientations, increasing hydride precipitation on those α-Zr grains having their c-axes stretched by the external load. A detailed analysis of the diffracted signal shows that such redistribution occurs during the precipitation stage, as a result of changes in the precipitation temperatures for different grain orientations.Fil: Vizcaino, Pablo. Comisión Nacional de Energía Atómica. Centro Atómico Ezeiza; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Santisteban, Javier Roberto. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Vicente Alvarez, Miguel Angel. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Banchik, Abraham David. Comisión Nacional de Energía Atómica. Centro Atómico Ezeiza; ArgentinaFil: Almer, J.. Argonne National Laboratory; Estados Unido