Covariant description of shape evolution and shape coexistence in neutron-rich nuclei at N\approx60

The shape evolution and shape coexistence phenomena in neutron-rich nuclei at $N\approx60$, including Kr, Sr, Zr, and Mo isotopes, are studied in the covariant density functional theory (DFT) with the new parameter set PC-PK1. Pairing correlations are treated using the BCS approximation with a separable pairing force. Sharp rising in the charge radii of Sr and Zr isotopes at N=60 is observed and shown to be related to the rapid changing in nuclear shapes. The shape evolution is moderate in neighboring Kr and Mo isotopes. Similar as the results of previous Hartree-Fock-Bogogliubov (HFB) calculations with the Gogny force, triaxiality is observed in Mo isotopes and shown to be essential to reproduce quantitatively the corresponding charge radii. In addition, the coexistence of prolate and oblate shapes is found in both $^{98}$Sr and $^{100}$Zr. The observed oblate and prolate minima are related to the low single-particle energy level density around the Fermi surfaces of neutron and proton respectively. Furthermore, the 5-dimensional (5D) collective Hamiltonian determined by the calculations of the PC-PK1 energy functional is solved for $^{98}$Sr and $^{100}$Zr. The resultant excitation energy of $0^+_2$ state and E0 transition strength $\rho^2(E0;0^+_2\rightarrow0^+_1)$ are in rather good agreement with the data. It is found that the lower barrier height separating the two competing minima along the $\gamma$ deformation in $^{100}$Zr gives rise to the larger $\rho^2(E0;0^+_2\rightarrow0^+_1)$ than that in $^{98}$Sr.Comment: 1 table, 11 figures, 23 page

Reexamining the temperature and neutron density conditions for r-process nucleosynthesis with augmented nuclear mass models

We explore the effects of nuclear masses on the temperature and neutron density conditions required for r-process nucleosynthesis using four nuclear mass models augmented by the latest atomic mass evaluation. For each model we derive the conditions for producing the observed abundance peaks at mass numbers A ~ 80, 130, and 195 under the waiting-point approximation and further determine the sets of conditions that can best reproduce the r-process abundance patterns (r-patterns) inferred for the solar system and observed in metal-poor stars of the Milky Way halo. In broad agreement with previous studies, we find that (1) the conditions for producing abundance peaks at A ~ 80 and 195 tend to be very different, which suggests that, at least for some nuclear mass models, these two peaks are not produced simultaneously; (2) the typical conditions required by the critical waiting-point (CWP) nuclei with the N = 126 closed neutron shell overlap significantly with those required by the N=82 CWP nuclei, which enables coproduction of abundance peaks at A ~ 130 and 195 in accordance with observations of many metal-poor stars; and (3) the typical conditions required by the N = 82 CWP nuclei can reproduce the r-pattern observed in the metal-poor star HD 122563, which differs greatly from the solar r-pattern. We also examine how nuclear mass uncertainties affect the conditions required for the r-process and identify some key nuclei including76Ni to 78Ni, 82Zn, 131Cd, and 132Cd for precise mass measurements at rare-isotope beam facilities.Comment: 28 pages,9 figures,1 tabl

Effects of current on vortex and transverse domain walls

By using the spin torque model in ferromagnets, we compare the response of vortex and transverse walls to the electrical current. For a defect-free sample and a small applied current, the steady state wall mobility is independent of the wall structure. In the presence of defects, the minimum current required to overcome the wall pinning potential is much smaller for the vortex wall than for the transverse wall. During the wall motion, the vortex wall tends to transform to the transverse wall. We construct a phase diagram for the wall mobility and the wall transformation driven by the current

Evaluation of ASTER GDEM ver2 using GPS measurements and SRTM ver4.1 in China

The freely available ASTER GDEM ver2 was released by NASA and METI on October 17, 2011. As one of the most complete high resolution digital topographic data sets of the world to date, the ASTER GDEM covers land surfaces between 83°N and 83°S at a spatial resolution of 1 arc-second and will be a useful product for many applications, such as relief analysis, hydrological studies and radar interferometry. The stated improvements in the second version of ASTER GDEM benefit from finer horizontal resolution, offset adjustment and water body detection in addition to new observed ASTER scenes. This study investigates the absolute vertical accuracy of the ASTER GDEM ver2 at five study sites in China using ground control points (GCPs) from high accuracy GPS benchmarks, and also using a DEM-to-DEM comparison with the Consultative Group for International Agriculture Research Consortium for Spatial Information (CGIAR-CSI) SRTM DEM (Version 4.1). And then, the results are separated into GlobCover land cover classes to derive the spatial pattern of error. It is demonstrated that the RMSE (19m) and mean (-13m) values of ASTER GDEM ver2 against GPS-GCPs in the five study areas is lower than its first version ASTER GDEM ver1 (26m and -21m) as a result of the adjustment of the elevation offsets in the new version. It should be noted that the five study areas in this study are representative in terms of terrain types and land covers in China, and even for most of mid-latitude zones. It is believed that the ASTER GDEM offers a major alternative in accessibility to high quality elevation data

Enhanced collectivity in neutron-deficient Sn isotopes in energy functional based collective Hamiltonian

The low-lying collective states in Sn isotopes are studied by a five-dimensional collective Hamiltonian with parameters determined from the triaxial relativistic mean-field calculations using the PC-PK1 energy density functional. The systematics for both the excitation energies of $2^+_1$ states and $B(E2;0^+_1\to 2^+_1)$ values are reproduced rather well, in particular, the enhanced E2 transitions in the neutron-deficient Sn isotopes with N<66. We show that the gradual degeneracy of neutron levels 1g7/2 and 2d5/2 around the Fermi surface leads to the increase of level density and consequently the enhanced paring correlations from N=66 to 58. It provokes a large quadrupole shape fluctuation around the spherical shape, and leads to an enhanced collectivity in the isotopes around N=58.Comment: 5 pages, 4 figures, accepted for publication in Physics Letters

Assessing the effects of technological progress on energy efficiency in the construction industry: A case of China

Energy-saving technologies in buildings have received great attention from energy efficiency researchers in the construction sector. Traditional research tends to focus on the energy used during building operation and in construction materials production, but it usually neglects the energy consumed in the building construction process. Very few studies have explored the impacts of technological progress on energy efficiency in the construction industry. This paper presents a model of the building construction process based on Cobb-Douglas production function. The model estimates the effects of technological progress on energy efficiency with the objective to examine the role that technological progress plays in energy savings in China's construction industry. The modeling results indicated that technological progress improved energy efficiency by an average of 7.1% per year from 1997 to 2014. Furthermore, three main technological progress factors (the efficiency of machinery and equipment, the proportion change of the energy structure, and research and development investment) were selected to analyze their effects on energy efficiency improvement. These positive effects were verified, and results show the effects of first two factors are significant. Finally, recommendations for promoting energy efficiency in the construction industry are proposed

LLAGN and jet-scaling probed with the EVN

Accreting black holes on all mass scales (from stellar to supermassive) appear to follow a nonlinear relation between X-ray luminosity, radio luminosity and BH mass, indicating that similar physical processes drive the central engines in X-ray binaries and active galactic nuclei (AGN). However, in recent years an increasing number of BH systems have been identified that do not fit into this scheme. These outliers may be the key to understand how BH systems are powered by accretion. Here we present results from EVN observations of a sample of low-luminosity AGN (LLAGN) with known mass that have unusually high radio powers when compared with their X-ray luminosity.Comment: Presented at the 11th EVN Symposium, Bordeaux, France, 2012 October 9-12. Six pages, including a figure and a table. Final, accepted versio