Viscoelastic vibration damping identification methods. Application to laminated glass.

Laminatedglass is composed of two glass layers and a thin intermediate PVB layer, strongly influencing PVB's viscoelastic behaviour its dynamic response. While natural frequencies are relatively easily identified even with simplified FE models, damping ratios are not identified with such an ease. In order to determine to what extent external factors influence dampingidentification, different tests have been carried out. The external factors considered, apart from temperature, are accelerometers, connection cables and the effect of the glass layers. To analyse the influence of the accelerometers and their connection cables a laser measuring device was employed considering three possibilities: sample without instrumentation, sample with the accelerometers fixed and sample completely instrumented. When the sample is completely instrumented, accelerometer readings are also analysed. To take into consideration the effect of the glass layers, tests were realised both for laminatedglass and monolithic samples. This paper presents in depth data analysis of the different configurations and establishes criteria for data acquisition when testing laminatedglass

The influence of holes in the mechanical properties of EWT solar cells

EWT back contact solar cells are manufactured from very thin silicon wafers. These wafers are drilled by means of a laser process creating a matrix of tiny holes with a density of approximately 125 holes per square centimeter. Their influence in the stiffness and mechanical strength has been studied. To this end, both wafers with and without holes have been tested with the ring on ring test. Numerical simulations of the tests have been carried out through the Finite Element Method taking into account the non-linearities present in the tests. It's shown that one may use coarse meshes without holes to simulate the test and after that sub models are used for the estimation of the stress concentration around the holes

OPTIMIZING THE DENSITY OF HOLES OF EWT SOLAR CELLS TAKING INTO CONSIDERATION MECHANICAL ASPECTS

ABSTRACT: EWT solar cells start from drilled wafers with approximately 100 holes/cm 2 . These holes act as stress concentrators leading to a reduction in the mechanical strength of this type of wafers. The viability of cells with higher density of holes has been studied. To this end, sets of wafers with different density of holes have been characterized. The ring on ring test has been employed and FE models have been developed to simulate the test. The statistical evaluation permits to draw conclusions about the reduction of the strength depending on the density of holes. Moreover, the stress concentration around the holes has been studied by means of the FE method employing the sub-modeling technique. The maximum principal stress of EWT wafers with twice the density of holes of commercial ones is almost the same. However, the mutual interaction between the stress concentration effects around neighboring holes is only observed for wafers with a density of 200 holes/cm 2

Comparative flood damage model assessment: towards a European approach

There is a wide variety of flood damage models in use internationally, differing substantially in their approaches and economic estimates. Since these models are being used more and more as a basis for investment and planning decisions on an increasingly large scale, there is a need to reduce the uncertainties involved and develop a harmonised European approach, in particular with respect to the EU Flood Risks Directive. In this paper we present a qualitative and quantitative assessment of seven flood damage models, using two case studies of past flood events in Germany and the United Kingdom. The qualitative analysis shows that modelling approaches vary strongly, and that current methodologies for estimating infrastructural damage are not as well developed as methodologies for the estimation of damage to buildings. The quantitative results show that the model outcomes are very sensitive to uncertainty in both vulnerability (i.e. depth–damage functions) and exposure (i.e. asset values), whereby the first has a larger effect than the latter. We conclude that care needs to be taken when using aggregated land use data for flood risk assessment, and that it is essential to adjust asset values to the regional economic situation and property characteristics. We call for the development of a flexible but consistent European framework that applies best practice from existing models while providing room for including necessary regional adjustments

Chronic Obstructive Pulmonary Disease and Incidence of Hip Fracture: A Nested Case-Control Study in the EpiChron Cohort

Purpose: To determine whether chronic obstructive pulmonary disease (COPD) is a risk factor for hip fracture and identify other factors associated with hip fracture. Patients and Methods: Observational nested case-control study was conducted in Aragon, Spain in 2010. We included COPD patients aged >40 years, in the EpiChron cohort. Each COPD patient was matched for age, sex, and number of comorbidities with a control subject without COPD. Patients with an existing diagnosis of osteoporosis and those with hip fracture before 2011 were excluded. We collected baseline demographic, comorbidity, and pharmacological treatment data. During a 5-year follow-up period, we recorded the incidence of hip fracture. A logistic regression model was constructed to identify factors associated with hip fracture. Results: The study population consisted of 26, 517 COPD patients and the same number of controls (median [interquartile range] age, 74 [17] years; women, 24.7%). Smoking and heart failure were more frequent in COPD patients, and obesity, hypertension, diabetes, dyslipidemia, stroke, arthritis, and visual or hearing impairment were less frequent (all p<0.001). Consumption of benzodiazepines (p=0.037), bronchodilators (p<0.001), and corticosteroids (p<0.001) was higher in the COPD group, while that of beta-blockers and thiazides was lower (both p<0.001). During follow-up, 898 (1.7%) patients experienced hip fracture, with no differences observed between COPD and control patients. Multivariate analysis revealed that independent of COPD status, age, female sex, chronic liver disease, heart failure, and benzodiazepine use were independently associated with a higher risk of hip fracture, and obesity with a lower risk. In COPD patients, use of inhaled anticholinergics was independently associated with hip fracture (OR, 1.390; 95% CI 1.134-1.702; p=0.001). Conclusion: COPD is not a risk factor for a hip fracture within 5 years. The association between the use of inhaled anticholinergics and risk of hip fracture warrants further study

A simplified courtship conditioning protocol to test learning and memory in Drosophila

In Drosophila, a male that has previously been sexually rejected reduces its courtship behavior when confronted again with an unreceptive female. This reduced courting time reflects a memory formation process. Here, we describe a simplified protocol to perform the courtship conditioning assay for assessing the reduced courting time, using regular lab equipment and handmade tools. Every step of the procedure, from raising flies and training to testing and quantification of this memory-related behavior, can be implemented in any practice laboratory.We would like to thank Javier Gil Castillo for its invaluable help and advices in 3D printing. We also thank the flies from Bloomington Stock Center. We would like to thank BioRender (www.biorender.com) for the open-access platform used to create the graphical abstract. This work was supported by the Spanish Research Agency (Ministerio de Innovacion y Ciencia [MICINN]) under the grant PGC2018-094630-B-100 to F.A.M., cofinanced by the European Regional Development Fund (ERDF) to F.A.M. F.A.M. is a recipient of a RyC-2014-14961 contract. B.G.-M. is a recipient of a FPI-UAM predoctoral fellowship, grant number SFPI/2020/00878. C.G.B. is a recipient of a FPU predoctoral fellowship, grant number FPU19/04449 (MEFP). S.P.-F. is a recipient of a JAE intro fellowship, grant number JAEINT_21_02520 (CSIC)

The effectiveness of manual stretching in the treatment of plantar heel pain: a systematic review

Background: Plantar heel pain is a commonly occurring foot complaint. Stretching is frequently utilised as a treatment, yet a systematic review focusing only on its effectiveness has not been published. This review aimed to assess the effectiveness of stretching on pain and function in people with plantar heel pain. Methods: Medline, EMBASE, CINAHL, AMED, and The Cochrane Library were searched from inception to July 2010. Studies fulfilling the inclusion criteria were independently assessed, and their quality evaluated using the modified PEDro scale. Results: Six studies including 365 symptomatic participants were included. Two compared stretching with a control, one study compared stretching to an alternative intervention, one study compared stretching to both alternative and control interventions, and two compared different stretching techniques and durations. Quality rating on the modified Pedro scale varied from two to eight out of a maximum of ten points. The methodologies and interventions varied significantly between studies, making meta-analysis inappropriate. Most participants improved over the course of the studies, but when stretching was compared to alternative or control interventions, the changes only reached statistical significance in one study that used a combination of calf muscle stretches and plantar fascia stretches in their stretching programme. Another study comparing different stretching techniques, showed a statistically significant reduction in some aspects of pain in favour of plantar fascia stretching over calf stretches in the short term. Conclusions: There were too few studies to assess whether stretching is effective compared to control or other interventions, for either pain or function. However, there is some evidence that plantar fascia stretching may be more effective than Achilles tendon stretching alone in the short-term. Appropriately powered randomised controlled trials, utilizing validated outcome measures, blinded assessors and long-term follow up are needed to assess the efficacy of stretching

Analysis of folylpoly-γ-glutamate synthetase gene expression in human B-precursor ALL and T-lineage ALL cells

BACKGROUND: Expression of folylpoly-γ-glutamate synthetase (FPGS) gene is two- to three-fold higher in B-precursor ALL (Bp- ALL) than in T-lineage ALL (T-ALL) and correlates with intracellular accumulation of methotrexate (MTX) polyglutamates and lymphoblast sensitivity to MTX. In this report, we investigated the molecular regulatory mechanisms directing FPGS gene expression in Bp-ALL and T-ALL cells. METHODS: To determine FPGS transcription rate in Bp-ALL and T-ALL we used nuclear run-on assays. 5'-RACE was used to uncover potential regulatory regions involved in the lineage differences. We developed a luciferase reporter gene assay to investigate FPGS promoter/enhancer activity. To further characterize the FPGS proximal promoter, we determined the role of the putative transcription binding sites NFY and E-box on FPGS expression using luciferase reporter gene assays with substitution mutants and EMSA. RESULTS: FPGS transcription initiation rate was 1.6-fold higher in NALM6 vs. CCRF-CEM cells indicating that differences in transcription rate led to the observed lineage differences in FPGS expression between Bp-ALL and T-ALL blasts. Two major transcripts encoding the mitochondrial/cytosolic and cytosolic isoforms were detected in Bp-ALL (NALM6 and REH) whereas in T-ALL (CCRF-CEM) cells only the mitochondrial/cytosolic transcript was detected. In all DNA fragments examined for promoter/enhancer activity, we measured significantly lower luciferase activity in NALM6 vs. CCRF-CEM cells, suggesting the need for additional yet unidentified regulatory elements in Bp-ALL. Finally, we determined that the putative transcription factor binding site NFY, but not E-box, plays a role in FPGS transcription in both Bp- and T-lineage. CONCLUSION: We demonstrated that the minimal FPGS promoter region previously described in CCRF-CEM is not sufficient to effectively drive FPGS transcription in NALM6 cells, suggesting that different regulatory elements are required for FPGS gene expression in Bp-cells. Our data indicate that the control of FPGS expression in human hematopoietic cells is complex and involves lineage-specific differences in regulatory elements, transcription initiation rates, and mRNA processing. Understanding the lineage-specific mechanisms of FPGS expression should lead to improved therapeutic strategies aimed at overcoming MTX resistance or inducing apoptosis in leukemic cells

Laser Cooling of Optically Trapped Molecules

Calcium monofluoride (CaF) molecules are loaded into an optical dipole trap (ODT) and subsequently laser cooled within the trap. Starting with magneto-optical trapping, we sub-Doppler cool CaF and then load $150(30)$ CaF molecules into an ODT. Enhanced loading by a factor of five is obtained when sub-Doppler cooling light and trapping light are on simultaneously. For trapped molecules, we directly observe efficient sub-Doppler cooling to a temperature of $60(5)$ $\mu\text{K}$. The trapped molecular density of $8(2)\times10^7$ cm$^{-3}$ is an order of magnitude greater than in the initial sub-Doppler cooled sample. The trap lifetime of 750(40) ms is dominated by background gas collisions.Comment: 5 pages, 5 figure