Assessing Optical and Electrical Properties of Highly Active IrO_x Catalysts for the Electrochemical Oxygen Evolution Reaction via Spectroscopic Ellipsometry

Efficient water electrolysis requires highly active electrodes. The activity of corresponding catalytic coatings strongly depends on material properties such as film thickness, crystallinity, electrical conductivity, and chemical surface speciation. Measuring these properties with high accuracy in vacuum-free and non-destructive methods facilitates the elucidation of structure–activity relationships in realistic environments. Here, we report a novel approach to analyze the optical and electrical properties of highly active oxygen evolution reaction (OER) catalysts via spectroscopic ellipsometry (SE). Using a series of differently calcined, mesoporous, templated iridium oxide films as an example, we assess the film thickness, porosity, electrical resistivity, electron concentration, electron mobility, and interband and intraband transition energies by modeling of the optical spectra. Independently performed analyses using scanning electron microscopy, energy-dispersive X-ray spectroscopy, ellipsometric porosimetry, X-ray reflectometry, and absorption spectroscopy indicate a high accuracy of the deduced material properties. A comparison of the derived analytical data from SE, resonant photoemission spectroscopy, X-ray absorption spectroscopy, and X-ray photoelectron spectroscopy with activity measurements of the OER suggests that the intrinsic activity of iridium oxides scales with a shift of the Ir 5d t2g sub-level and an increase of p–d interband transition energies caused by a transition of μ1-OH to μ3-O species

The role of the copper oxidation state in the electrocatalytic reduction of CO2 into valuable hydrocarbons

Redox-active copper catalysts with accurately prepared oxidation states (Cu0, Cu+ and Cu2+) and high selectivity to C2 hydrocarbon formation, from electrocatalytic cathodic reduction of CO2, were fabricated and characterized. The electrochemically prepared copper-redox electro-cathodes yield higher activity for the production of hydrocarbons at lower oxidation state. By combining advanced X-ray spectroscopy and in situ micro-reactors it was possible to unambiguously reveal the variation in the complex electronic structure that the catalysts undergo at different stages (i.e. during fabrication and electrocatalytic reactions). It was found that the surface, sub-surface and bulk properties of the electrochemically prepared catalysts are dominated by the formation of copper carbonates on the surface of cupric-like oxides, which prompts catalyst deactivation by restraining effective charge transport. Furthermore, the formation of reduced or partially-reduced copper catalysts yields the key dissociative proton-consuming reactive adsorption of CO2 to produce CO, allowing the subsequent hydrogenation into C2 and C1 products by dimerization and protonation. These results yield valuable information on the variations in the electronic structure that redox-active copper catalysts undergo in the course of the electrochemical reaction, which, under extreme conditions are mediated by thermodynamics but, critically, kinetics dominate near the oxide/metal phase transitions

AgCu Bimetallic Electrocatalysts for the Reduction of Biomass-Derived Compounds

The electrochemical transformation of biomass-derived compounds (e.g., aldehyde electroreduction to alcohols) is gaining increasing interest due to the sustainability of this process that can be exploited to produce value-added products from biowastes and renewable electricity. In this framework, the electrochemical conversion of 5-hydroxymethylfurfural (HMF) to 2,5-bis(hydroxymethyl)furan (BHMF) is studied. Nanostructured Ag deposited on Cu is an active and selective electrocatalyst for the formation of BHMF in basic media. However, this catalyst deserves further research to elucidate the role of the morphology and size of the coated particles in its performance as well as the actual catalyst surface composition and its stability. Herein, Ag is coated on Cu open-cell foams by electrodeposition and galvanic displacement to generate different catalyst morphologies, deepening on the particle growth mechanism, and the samples are compared with bare Ag and Cu foams. The chemical–physical and electrochemical properties of the as-prepared and spent catalysts are correlated to the electroactivity in the HMF conversion and its selectivity toward the formation of BHMF during electroreduction. AgCu bimetallic nanoparticles or dendrites are formed on electrodeposited and displaced catalysts, respectively, whose surface is Cu-enriched along with electrochemical tests. Both types of bimetallic AgCu particles evidence a superior electroactive surface area as well as an enhanced charge and mass transfer in comparison with the bare Ag and Cu foams. These features together with a synergistic role between Ag and Cu superficial active sites could be related to the twofold enhanced selectivity of the Ag/Cu catalysts for the selective conversion of HMF to BHMF, that is, >80% selectivity and ∼ 100% conversion, and BHMF productivity values (0.206 and 0.280 mmol cm–2 h–1) ca. 1.5–3 times higher than those previously reported

Graphene-Capped Liquid Thin Films for Electrochemical Operando X-ray Spectroscopy and Scanning Electron Microscopy

Electrochemistry is a promising building block for the global transition to a sustainable energy market. Particularly the electroreduction of CO2 and the electrolysis of water might be strategic elements for chemical energy conversion. The reactions of interest are inner-sphere reactions, which occur on the surface of the electrode, and the biased interface between the electrode surface and the electrolyte is of central importance to the reactivity of an electrode. However, a potential-dependent observation of this buried interface is challenging, which slows the development of catalyst materials. Here we describe a sample architecture using a graphene blanket that allows surface sensitive studies of biased electrochemical interfaces. At the examples of near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and environmental scanning electron microscopy (ESEM), we show that the combination of a graphene blanket and a permeable membrane leads to the formation of a liquid thin film between them. This liquid thin film is stable against a water partial pressure below 1 mbar. These properties of the sample assembly extend the study of solid–liquid interfaces to highly surface sensitive techniques, such as electron spectroscopy/microscopy. In fact, photoelectrons with an effective attenuation length of only 10 Å can be detected, which is close to the absolute minimum possible in aqueous solutions. The in-situ cells and the sample preparation necessary to employ our method are comparatively simple. Transferring this approach to other surface sensitive measurement techniques should therefore be straightforward. We see our approach as a starting point for more studies on electrochemical interfaces and surface processes under applied potential. Such studies would be of high value for the rational design of electrocatalysts

Correction to: The Role of Adsorbed and Subsurface Carbon Species for the Selective Alkyne Hydrogenation Over a Pd-Black Catalyst: An Operando Study of Bulk and Surface

The selective hydrogenation of propyne over a Pd-black model catalyst was investigated under operando conditions at 1 bar making use of advanced X-ray diffraction (bulk sensitive) and photo-electron spectroscopy (surface sensitive) techniques. It was found that the population of subsurface species controls the selective catalytic semi-hydrogenation of propyne to pro-pylene due to the formation of surface and near-surface PdCx that inhibits the participation of more reactive bulk hydrogen in the hydrogenation reaction. However, increasing the partial pressure of hydrogen reduces the population of PdCx with the concomitant formation of a β-PdHx phase up to the surface, which is accompanied by a lattice expansion, allowing the participation of more active bulk hydrogen which is responsible for the unselective total alkyne hydrogenation. Therefore, controlling the surface and subsurface catalyst chemistry is crucial to control the selective alkyne semi-hydrogenation

On the activity/selectivity and phase stability of thermally grown copper oxides during the electrocatalytic reduction of CO2

Revealing the active nature of oxide-derived copper is of key importance to understand its remarkable catalytic performance during the cathodic CO2 reduction reaction (CO2RR) to produce valuable hydrocarbons. Using advanced spectroscopy, electron microscopy, and electrochemically active surface area characterization techniques, the electronic structure and the changes in the morphology/roughness of thermally oxidized copper thin films were revealed during CO2RR. For this purpose, we developed an in situ cell for X-ray spectroscopy that could be operated accurately in the presence of gases or liquids to clarify the role of the initial thermal oxide phase and its active phase during the electrocatalytic reduction of CO2. It was found that the Cu(I) species formed during the thermal treatment are readily reduced to Cu0 during the CO2RR, whereas Cu(II) species are hardly reduced. In addition, Cu(II) oxide electrode dissolution was found to yield a porous/void structure, where the lack of electrical connection between isolated islands prohibits the CO2RR. Therefore, the active/stable phase for CO2RR is metallic copper, independent of its initial phase, with a significant change in its morphology upon its reduction yielding the formation of a rougher surface with a higher number of underco-ordinated sites. Thus, the initial thermal oxidation of copper in air controls the reaction activity/selectivity because of the changes induced in the electrode surface morphology/roughness and the presence of more undercoordinated sites during the CO2RR

Imported strongyloidiasis : Data from 1245 cases registered in the +REDIVI Spanish collaborative network (2009-2017)

Background Imported strongyloidiasis is increasingly being diagnosed in non-endemic areas. The aim of this study was to describe the epidemiological, clinical and microbiological characteristics of patients with imported strongyloidiasis in Spain. Methodology This is an observational retrospective study that included all patients diagnosed of strongyloidiasis registered in the +REDIVI Collaborative Network from 2009 to 2017. Demographic, epidemiological and clinical information was collected from the +REDIVI database, and extra information regarding microbiological techniques, treatment and follow-up was requested to participant centers. Findings Overall, 1245 cases were included. Most of them were immigrants (66.9%), and South America was the most frequent area of origin. Detection of larvae in stool samples was observed in 21.9% of the patients, and serological tests allowed making the diagnosis in the rest of the cases. Eosinophilia was present in 82.2% of cases. Treatment with ivermectin (compared with albendazole) was the most strongly associated factor to achieve the cure (OR 2.34). Conclusions Given the long latency of the infection and the risk of developing a severe presentation, screening of S. stercoralis infection should be mandatory in patients coming from or had traveling to endemic areas, especially in those with immunosuppressant conditions

The Electrophilicity of Surface Carbon Species in the Redox Reactions of CuO‐CeO₂ Catalysts

Electronic metal–support interactions (EMSI) describe the electron flow between metal sites and a metal oxide support. It is generally used to follow the mechanism of redox reactions. In this study of CuO‐CeO2 redox, an additional flow of electrons from metallic Cu to surface carbon species is observed via a combination of operando X‐ray absorption spectroscopy, synchrotron X‐ray powder diffraction, near ambient pressure near edge X‐ray absorption fine structure spectroscopy, and diffuse reflectance infrared Fourier transform spectroscopy. An electronic metal–support–carbon interaction (EMSCI) is proposed to explain the reaction pathway of CO oxidation. The EMSCI provides a complete picture of the mass and electron flow, which will help predict and improve the catalytic performance in the selective activation of CO2, carbonate, or carbonyl species in C1 chemistry