Biomechanical comparison of the track start and the modified one-handed track start in competitive swimming: an intervention study

This study compared the conventional track and a new one-handed track start in elite age group swimmers to determine if the new technique had biomechanical implications on dive performance. Five male and seven female GB national qualifiers participated (mean ± SD: age 16.7 ± 1.9 years, stretched stature 1.76 ± 0.8 m, body mass 67.4 ± 7.9 kg) and were assigned to a control group (n = 6) or an intervention group (n = 6) that learned the new onehanded dive technique. All swimmers underwent a 4-week intervention comprising 12 ± 3 thirty-minute training sessions. Video cameras synchronized with an audible signal and timing suite captured temporal and kinematic data. A portable force plate and load cell handrail mounted to a swim starting block collected force data over 3 trials of each technique. A MANCOVA identified Block Time (BT), Flight Time (FT), Peak Horizontal Force of the lower limbs (PHF) and Horizontal Velocity at Take-off (Vx) as covariates. During the 10-m swim trial, significant differences were found in Time to 10 m (TT10m), Total Time (TT), Peak Vertical Force (PVF), Flight Distance (FD), and Horizontal Velocity at Take-off (Vx) (p < .05). Results indicated that the conventional track start method was faster over 10 m, and therefore may be seen as a superior start after a short intervention. During training, swimmers and coaches should focus on the most statistically significant dive performance variables: peak horizontal force and velocity at take-off, block and flight time

Kojonup maintenance Phosphorus and Sulphur Trial 68BR7EX

68BR7 Maintenance superphosphate and sulphur trial To determine the level of superphosphate to maintain near maximum plant and animal production with and without additional elemental sulphur. Experimental: There are 41 plots with 29 treatments. 12 treatments have 2 replications. Site: Very old land, whitegum and sheoak vegetation with greybrown sandy loam and some quartz grit. History: Superphosphate - 1/2bag for 40 years - 3,600 lbs (1633 kg). 600 lb (272 kg) in the last 4 years to 1967

Summary of 1974 Phosphorus and sulphur group

Stocking x Super Rate - Merredin - 66M30. Twitcham - 62MB9. Kojonup - 68BR7. Maintenance P x S Trials - I. Residual Value - 66N07 and 66ME3. II. Wheatbelt Rate Trials - 67N011, 66LG1, 68LG1, 67NO5, 6NA3, 67GE2, 66M06 and 67M01. III. Wheatbelt Research Stations and Farmers- 65C5, 65A1, 65N5,69WH15 and 66N09. IV. Higher Rainfall Area Trials - 68B1, 68BU2, 68BR5,68AL3, 69E6, 69AL2 and 69AL3. Miscellaneous Trials - 74GE2, 74GE4, 74GE5,74JE3, 74LG4, 74M06, 74M07, 74TS3, 74NA3 74NA4, 74M07, 74TS4

1975 Phosphorus and sulphur group results

Stocking X Super Rate - 66M30, 68BR7. Residual Value of Superphosphate - 66 & 68LG1, 66ME3, 66NO7, 67NO11, 67NO5, 74GE2, 74MO7, 74MO8. Maintainance P X S Trials - 65A1, 65C5, 65N5, 67NO11, 68AL3, 68B1, 69AL2, 69AL3, 69E6, 69WH15. Miscellaneous trials - Rates and Methods of Super on Wheat Lupins and Clover 74LG5, 75A20 and 21; 75ES5, 6, and 7; 75GE6 and 7; 75JE7, 75JE5, 75KA3 and 4; 75LG4 and 7; 75LG26; 75MO9, 75MO28, 75NA4, 75NO5 and 6. High Rainfall Pasture Trials - 75AL4 and 5; 75AR3 and 4; 75BR11, 12, and 13; 75BY5, 6, and 8; 75BU8 and 10; 75DE2, 3, 4, 5, 6, and 7. Notes on Discarded Trials

Super and stocking rates at Kojonup after 10 years

A Department of Agriculture trial on old land at Kojonup has been comparing rates of superphosphate and stocking of sheep for 10 years

Retained Laser Fibre Following Endovenous Laser Ablation

IntroductionTo report the breakage and retention of a laser fibre, following endovenous laser ablation (EVLA).Case reportThe great saphenous vein (GSV) of a 57 year-old man was treated with EVLA. During withdrawal, a flash of light was seen from a hole that had burned through the introducer sheath. This device was removed and a second sheath and laser fibre inserted to complete the ablation procedure. A follow-up duplex scan identified a residual length of laser fibre within the GSV that was removed by an additional surgical procedure. A change in laser fibre length had not been identified during the initial procedure.DiscussionThis case highlights the importance of routinely inspecting the sheath and fibre following EVLA to ensure that they have been removed intact

Controlling the release of indomethacin from glass solutions layered with a rate controlling membrane using fluid-bed processing. Part 1: Surface and cross-sectional chemical analysis

Fluid bed coating has been shown to be a suitable manufacturing technique to formulate poorly soluble drugs in glass solutions. Layering inert carriers with a drug–polymer mixture enables these beads to be immediately filled into capsules, thus avoiding additional, potentially destabilizing, downstream processing. In this study, fluid bed coating is proposed for the production of controlled release dosage forms of glass solutions by applying a second, rate controlling membrane on top of the glass solution. Adding a second coating layer adds to the physical and chemical complexity of the drug delivery system, so a thorough understanding of the physical structure and phase behavior of the different coating layers is needed. This study aimed to investigate the surface and cross-sectional characteristics (employing scanning electron microscopy (SEM) and time of flight secondary ion mass spectrometry (ToF-SIMS)) of an indomethacin–polyvinylpyrrolidone (PVP) glass solution, top-coated with a release rate controlling membrane consisting of either ethyl cellulose or Eudragit RL. The implications of the addition of a pore former (PVP) and the coating medium (ethanol or water) were also considered. In addition, polymer miscibility and the phase analysis of the underlying glass solution were investigated. Significant differences in surface and cross-sectional topography of the different rate controlling membranes or the way they are applied (solution vs dispersion) were observed. These observations can be linked to the polymer miscibility differences. The presence of PVP was observed in all rate controlling membranes, even if it is not part of the coating solution. This could be attributed to residual powder presence in the coating chamber. The distribution of PVP among the sample surfaces depends on the concentration and the rate controlling polymer used. Differences can again be linked to polymer miscibility. Finally, it was shown that the underlying glass solution layer remains amorphous after coating of the rate controlling membrane, whether formed from an ethanol solution or an aqueous dispersion

Multivariate ToF-SIMS image analysis of polymer microarrays and protein adsorption

The complexity of hyperspectral time of flight secondary ion mass spectrometry (ToF-SIMS) datasets makes their subsequent analysis and interpretation challenging, and is often an impasse to the identification of trends and differences within large sample-sets. The application of multivariate data analysis has become a routine method to successfully deconvolute and analyze objectively these datasets. The advent of high-resolution large area ToF-SIMS imaging capability has enlarged further the data handling challenges. In this work, a modified multivariate curve resolution image analysis of a polymer microarray containing 70 different poly(meth)acrylate type spots (over a 9.2 × 9.2 mm area) is presented. This analysis distinguished key differences within the polymer library such as the differentiation between acrylate and methacrylate polymers and variance specific to side groups. Partial least squares (PLS) regression analysis was performed to identify correlations between the ToF-SIMS surface chemistry and the protein adsorption. PLS analysis identified a number of chemical moieties correlating with high or low protein adsorption, including ions derived from the polymer backbone and polyethylene glycol side-groups. The retrospective validation of the findings from the PLS analysis was also performed using the secondary ion images for those ions found to significantly contribute to high or low protein adsorption