4,883 research outputs found
Analytical and statistical study on the effects of porosity level on weld joint performance Progress report
Correlation between porosity defects and mechanical behavior of weld joint
Time-asymptotic solutions of the Navier-Stokes equation for free shear flows using an alternating-direction implicit method
An uncoupled time asymptotic alternating direction implicit method for solving the Navier-Stokes equations was tested on two laminar parallel mixing flows. A constant total temperature was assumed in order to eliminate the need to solve the full energy equation; consequently, static temperature was evaluated by using algebraic relationship. For the mixing of two supersonic streams at a Reynolds number of 1,000, convergent solutions were obtained for a time step 5 times the maximum allowable size for an explicit method. The solution diverged for a time step 10 times the explicit limit. Improved convergence was obtained when upwind differencing was used for convective terms. Larger time steps were not possible with either upwind differencing or the diagonally dominant scheme. Artificial viscosity was added to the continuity equation in order to eliminate divergence for the mixing of a subsonic stream with a supersonic stream at a Reynolds number of 1,000
Proposed CTV design reference missions in support of Space Station Freedom
Use of design reference missions (DRM's) for the cargo transfer vehicle (CTV) in support of Space Station Freedom (SSF) can provide a common baseline for the design and assessment of CTV systems and mission operations. These DRM's may also provide baseline operations scenarios for integrated CTV, Shuttle, and SSF operations. Proposed DRM's for CTV, SSF, and Shuttle operations envisioned during the early post-PMC time frame and continuing through mature, SSF evolutionary operations are described. These proposed DRM's are outlines for detailed mission definition; by treating these DRM's as top-level input for mission design studies, a range of parametric studies for systems/operations may be performed. Shuttle flight design experience, particularly rendezvous flight design, provides an excellent basis for DRM operations studies. To begin analysis of the DRM's, shuttle trajectory design tools were used in single case analysis to define CTV performance requirements. A summary of these results is presented
Star formation in Seyfert galaxies
An analysis of the IRAS data for a sample of classical (optically selected) Seyfert galaxies is presented. The IRAS fluxes at 25 micron, 60 micron, and 100 micron are found to be uncorrelated or only very weakly correlated with the UV/Optical continuum flux and the near and mid IR flux at 3.5 and 10 microns. To investigate the possibility that star formation accounts for the far IR flux, the IRAS measurements for the Seyfert galaxies are compared to IRAS observations of a sample of normal spiral galaxies, and a sample of Starburst galaxies. It is shown that the far IR luminosities and far IR colors of Seyfert galaxies are indistinguishable from those of the Starburst galaxies. Besides, normal galaxies are an order of magnitude less luminous than both the Seyfert and the Starburst galaxies. This indicates that star formation produces the bulk of the far infrared emission in Seyfert galaxies
The development of test beds to support the definition and evolution of the Space Station Freedom power system
Since the beginning of the Space Station Freedom Program (SSFP), the Lewis Research Center (LeRC) and the Rocketdyne Division of Rockwell International have had extensive efforts underway to develop test beds to support the definition of the detailed electrical power system design. Because of the extensive redirections that have taken place in the Space Station Freedom Program in the past several years, the test bed effort was forced to accommodate a large number of changes. A short history of these program changes and their impact on the LeRC test beds is presented to understand how the current test bed configuration has evolved. The current test objectives and the development approach for the current DC Test Bed are discussed. A description of the test bed configuration, along with its power and controller hardware and its software components, is presented. Next, the uses of the test bed during the mature design and verification phase of SSFP are examined. Finally, the uses of the test bed in operation and evolution of the SSF are addressed
Assessment and evaluation of noise controls on roof bolting equipment and a method for predicting sound pressure levels in underground coal mining
Over-exposure to noise remains a widespread and serious health hazard in the U.S. mining industries despite 25 years of regulation. Every day, 80% of the nation\u27s miners go to work in an environment where the time weighted average (TWA) noise level exceeds 85 dBA and more than 25% of the miners are exposed to a TWA noise level that exceeds 90 dBA, the permissible exposure limit (PEL). Additionally, MSHA coal noise sample data collected from 2000 to 2002 show that 65% of the equipment whose operators exceeded 100% noise dosage comprise only seven different types of machines; auger miners, bulldozers, continuous miners, front end loaders, roof bolters, shuttle cars (electric), and trucks. In addition, the MSHA data indicate that the roof bolter is third among all the equipment and second among equipment in underground coal whose operators exceed 100% dosage.;A research program was implemented to: (1) determine, characterize and to measure sound power levels radiated by a roof bolting machine during differing drilling configurations (thrust, rotational speed, penetration rate, etc.) and utilizing differing types of drilling methods in high compressive strength rock media (\u3e20,000 psi). The research approach characterized the sound power level results from laboratory testing and provided the mining industry with empirical data relative to utilizing differing noise control technologies (drilling configurations and types of drilling methods) in reducing sound power level emissions on a roof bolting machine; (2) distinguish and correlate the empirical data into one, statistically valid, equation, in which, provided the mining industry with a tool to predict overall sound power levels of a roof bolting machine given any type of drilling configuration and drilling method utilized in industry; (3) provided the mining industry with several approaches to predict or determine sound pressure levels in an underground coal mine utilizing laboratory test results from a roof bolting machine and (4) described a method for determining an operators\u27 noise dosage of a roof bolting machine utilizing predicted or determined sound pressure levels
Data-driven PDE discovery with evolutionary approach
The data-driven models allow one to define the model structure in cases when
a priori information is not sufficient to build other types of models. The
possible way to obtain physical interpretation is the data-driven differential
equation discovery techniques. The existing methods of PDE (partial derivative
equations) discovery are bound with the sparse regression. However, sparse
regression is restricting the resulting model form, since the terms for PDE are
defined before regression. The evolutionary approach described in the article
has a symbolic regression as the background instead and thus has fewer
restrictions on the PDE form. The evolutionary method of PDE discovery (EPDE)
is described and tested on several canonical PDEs. The question of robustness
is examined on a noised data example
Spectral components at visual and infrared wavelengths in active galactic nuclei
Aperture-dependent infrared photometry of active galactic nuclei are presented which illustrate the importance of eliminating starlight of the galaxy in order to obtain the intrinsic spectral distribution of the active nuclei. Separate components of emission are required to explain the infrared emission with a spectral index of alpha approx = 2 and the typical visual-ultraviolet continuum with alpha approx = 0.3 (where F(nu) varies as nu(sup-alpha). Present evidence does not allow unique determination of the appropriate mechanisms, but the characteristics of each are discussed
- …