3,098 research outputs found
A cohort study of the associations between udder conformation, milk somatic cell count, and lamb weight in suckler ewes
A cohort study of 67 suckler ewes from 1 farm was carried out from January to May 2010 to investigate associations between udder conformation, udder half milk somatic cell count (SCC), and lamb weight. Ewes and lambs were observed at lambing. Ewe health and teat condition and lamb health and weight were recorded on 4 to 5 further occasions at 14-d intervals. At each observation, a milk sample was collected from each udder half for somatic cell counting. Two weeks after lambing, ewe udder conformation and teat placement were scored. Low lamb weight was associated with ewe SCC >400,000 cells/mL (−0.73kg), a new teat lesion 14 d previously (−0.91kg), suboptimal teat position (−1.38kg), rearing in a multiple litter (−1.45kg), presence of diarrhea at the examination (−1.19kg), and rearing by a 9-yr-old ewe compared with a 6-yr-old ewe (−2.36kg). High lamb weight was associated with increasing lamb age (0.21kg/d), increasing birth weight (1.65kg/kg at birth), and increasing number of days the ewe was given supplementary feed before lambing (0.06kg/d). High udder half SCC was associated with pendulous udders (9.6% increase in SCC/cm of drop) and greater total cross-sectional area of the teats (7.2% increase of SCC/cm2). Low SCC were associated with a heavier mean litter weight (6.7% decrease in SCC/kg). Linear, quadratic, and cubic terms for days in lactation were also significant. We conclude that poor udder and teat conformation are associated with high levels of intramammary infection, as indicated by increased SCC and that both physical attributes of the udder and SCC are linked to lamb growth, suggesting that selection of suckler ewes with better udder and teat conformation would reduce intramammary infection and increase lamb growth rate
Z_3 Strings and their Interactions
We construct Z_3 vortex solutions in a model in which SU(3) is spontaneously
broken to Z_3. The model is truncated to one in which there are only two
dimensionless free parameters and the interaction of vortices within this
restricted set of models is studied numerically. We find that there is a curve
in the two dimensional space of parameters for which the energy of two
asymptotically separated vortices equals the energy of the vortices at
vanishing separation. This suggests that the inter-vortex potential for Z_3
strings might be flat for these couplings, much like the case of U(1) strings
in the Bogomolnyi limit. However, we argue that the intervortex potential is
attractive at short distances and repulsive at large separations leading to the
possibility of unstable bound states of Z_3 vortices.Comment: 8 pages; mainly corrected typos in table
Characterization of a novel reassortant H5N6 highly pathogenic avian influenza virus clade 2.3.4.4 in Korea, 2017
Germline mutations of the STK11 gene in Korean Peutz–Jeghers syndrome patients
Peutz–Jeghers syndrome (PJS) is an autosomal dominantly inherited disease characterized by hamartomatous gastrointestinal polyps and mucocutaneous pigmentation, with an increased risk for various neoplasms, including gastrointestinal cancer. Recently, the PJS gene encoding the serine/threonine kinase STK11 (also named LKB1) was mapped to chromosome 19p13.3, and germline mutations were identified in PJS patients. We screened a total of ten Korean PJS patients (nine sporadic cases and one familial case including two patients) to investigate the germline mutations of the STK11 gene. By polymerase chain reaction–single-strand conformation polymorphism and DNA sequencing analysis, three kinds of mis-sense mutation and a frame-shift mutation were identified: codon 232 (TCC to CCC) in exon 5, codon 256 (GAA to GCA) in exon 6, codon 324 (CCG to CTG) in exon 8, and a guanine insertion at codon 342 resulting in a premature stop codon in exon 8. These mis-sense variants were not detected in 100 control DNA samples. Furthermore, we found an intronic mutation at the dinucleotide sequence of a splice-acceptor site: a one base substitution from AG to CG in intron 1, which may cause aberrant splicing. Most reported germline mutations of the STK11 gene in PJS patients were frame-shift or non-sense mutations resulting in truncated proteins. Together, these findings indicate that germline mis-sense mutations of the STK11 gene are found in PJS patients in addition to truncating mutations. The effects of these mutations on protein function require further examination. In summary, we found germline mutations of the STK11 gene in five out of ten Korean PJS patients. © 2000 Cancer Research Campaig
Critical flow prediction by system codes – Recent analyses made within the FONESYS network
A benchmark activity on Two-Phase Critical Flow (TPCF) prediction was conducted in the framework of the
Forum & Network of System Thermal-Hydraulics Nuclear Reactor Thermal-Hydraulics (FONESYS). FONESYS is a
network among code developers who share the common objective to strengthen current technology. The aim of
the FONESYS Network is to highlight the capabilities and the robustness as well as the limitations of current SYSTH
codes to predict the main phenomena during transient scenarios in nuclear reactors for safety issues.
Six separate effect test facilities, more than 90 tests, both in steady and transient conditions, were considered
for the activity. Moreover, two ideal tests were designed for code to code comparison in clearly defined conditions.
Overall eight System Thermal-Hydraulic (SYS-TH) codes were adopted, mostly by the developers
themselves, ensuring the minimization of the user effect. Results from selected tests were also compared against
Delayed Equilibrium Model, not yet implemented in industrial version of SYS-TH codes.
Generally, the results of the benchmark show an improvement of the capability of SYS-TH codes to predict
TPCF in the last three decades. However, predicting break flowrate remains a major source of uncertainty in
accidental transient simulations of Water-Cooled Nuclear Reactors (WCNR). A set of possible actions is proposed
to go beyond the current limitations of choked flow models. More detailed guidelines for using 0-D choked flow
models is possible by using the experience gained by the benchmark results as well as all available validation
results. Progress in understanding and 1-D modelling of flashing and choked flow might be achieved by a deeper
physical analysis leading to more mechanistic models based on specific flow regime maps for high speed flow.
Also the use of advanced 3-D numerical tools may help to understand and predict the complex 3-D geometrical
effect
Atomistic origins of high-performance in hybrid halide perovskite solar cells
The performance of organometallic perovskite solar cells has rapidly
surpassed that of both conventional dye-sensitised and organic photovoltaics.
High power conversion efficiency can be realised in both mesoporous and
thin-film device architectures. We address the origin of this success in the
context of the materials chemistry and physics of the bulk perovskite as
described by electronic structure calculations. In addition to the basic
optoelectronic properties essential for an efficient photovoltaic device
(spectrally suitable band gap, high optical absorption, low carrier effective
masses), the materials are structurally and compositionally flexible. As we
show, hybrid perovskites exhibit spontaneous electric polarisation; we also
suggest ways in which this can be tuned through judicious choice of the organic
cation. The presence of ferroelectric domains will result in internal junctions
that may aid separation of photoexcited electron and hole pairs, and reduction
of recombination through segregation of charge carriers. The combination of
high dielectric constant and low effective mass promotes both Wannier-Mott
exciton separation and effective ionisation of donor and acceptor defects. The
photoferroic effect could be exploited in nanostructured films to generate a
higher open circuit voltage and may contribute to the current-voltage
hysteresis observed in perovskite solar cells.Comment: 6 pages, 5 figure
Prevalence of Depression among Households in Three Capital Cities of Pakistan: Need to Revise the Mental Health Policy
BACKGROUND: Pakistan, among the other developing countries, has a higher prevalence rate of depression because of the current social adversities. There is, thus, a great need for systematic studies on prevalence of depression. The current study aims at exploring the prevalence of depression among households in three capital cities of Pakistan. METHODOLOGY AND PRINCIPAL FINDINGS: A sample of N = 820 was randomly selected, and a cross sectional telephone-based study was conducted for a duration of six months. It was found that there was a regional variation in prevalence rates for depression among the three cities. Lahore had the highest number of depressives (53.4%), as compared to Quetta (43.9%) and Karachi (35.7%). Middle age, female gender and secondary school level of education were significantly associated with depression among the study group. CONCLUSIONS/SIGNIFICANCE: The different rates of prevalence among the three cities could be attributed to local cultural influence, geographical locations and social adversities. There is a need for revision of existing health policy by the government
Morphological changes of injected calcium phosphate cement in osteoporotic compressed vertebral bodies
SUMMARY: This study was undertaken to investigate the radiologic and clinical outcomes of vertebroplasty with calcium phosphate (CaP) cement in patients with osteoporotic vertebral compression fractures. The morphological changes of injected CaP cement in osteoporotic compressed vertebral bodies were variable and unpredictable. We suggest that the practice of vertebroplasty using CaP should be reconsidered.
INTRODUCTION: Recently, CaP, an osteoconductive filler material, has been used in the treatment of osteoporotic compression fractures. However, the clinical results of CaP-cement-augmented vertebrae are still not well established. The purpose of this study is to assess the clinical results of vertebroplasty with CaP by evaluating the morphological changes of CaP cement in compressed vertebral bodies.
METHODS: Fourteen patients have been followed for more than 2 years after vertebroplasty. The following parameters were reviewed: age, sex, T score, compliance with osteoporosis medications, visual analog scale score, compression ratio, subsequent compression fractures, and any morphological changes in the filler material.
RESULTS: The morphological changes of injected CaP included reabsorption, condensation, bone formation (osteogenesis), fracture of the CaP solid hump, and heterotopic ossification. Out of 14 patients, 11 (78.6%) developed progression of the compression of the CaP-augmented vertebral bodies after vertebroplasty.
CONCLUSIONS: The morphological changes of the injected CaP cement in the vertebral bodies were variable and unpredictable. The compression of the CaP-augmented vertebrae progressed continuously for 2 years or more. The findings of this study suggest that vertebroplasty using CaP cement should be reconsidered.ope
Antimony-Doped Tin(II) Sulfide Thin Films
Thin-film solar cells made from earth-abundant, inexpensive, and nontoxic materials are needed to replace the current technologies whose widespread use is limited by their use of scarce, costly, and toxic elements. Tin monosulfide (SnS) is a promising candidate for making absorber layers in scalable, inexpensive, and nontoxic solar cells. SnS has always been observed to be a p-type semiconductor. Doping SnS to form an n-type semiconductor would permit the construction of solar cells with p-n homojunctions. This paper reports doping SnS films with antimony, a potential n-type dopant. Small amounts of antimony (1%) were found to greatly increase the electrical resistance of the SnS. The resulting intrinsic SnS(Sb) films could be used for the insulating layer in a p-i-n design for solar cells. Higher concentrations (5%) of antimony did not convert the SnS(Sb) to low-resistivity n-type conductivity, but instead the films retain such a high resistance that the conductivity type could not be determined. Extended X-ray absorption fine structure analysis reveals that the highly doped films contain precipitates of a secondary phase that has chemical bonds characteristic of metallic antimony, rather than the antimony–sulfur bonds found in films with lower concentrations of antimony.United States. Dept. of Energy. Sunshot Initiative (Contract DE-EE0005329)National Science Foundation (U.S.) (Grant CBET-1032955
- …