71 research outputs found
Facies model for a coarse-grained, tide-influenced delta : Gule Horn Formation (Early Jurassic), Jameson Land, Greenland
Acknowledgements: Funding for this project was provided from the Research Council of Norway through the Petromaks project 193059 and the FORCE Safari Project. Arild Andresen (University of Oslo) and Aka Lynge (POLOG) are thanked for logistical support, Björn Nyberg (Uni Research CIPR and University of Bergen) for assistance in the field, Arve Næss (Statoil) for providing data and assistance during the planning phase, Julien Vallet and Huges Fournier (Helimap Systems SA) for data acquisition. Riegl LMS GmbH is acknowledged for software support. We thank Brian Willis and an anonymous reviewer for their insightful and thorough reviews and Mariano Marzo for editorial comments.Peer reviewedPublisher PD
Predictable patterns in stacking and distribution of channelized fluvial sand bodies linked to channel mobility and avulsion processes
ACKNOWLEDGMENTS Funding from the American Chemical Society Petroleum Research Fund (ACS PRF 50310-DNI8), the University of New Orleans (Louisiana, USA), and a Marie Skłodowska-Curie grant (no. 707404) is thankfully acknowledged. We thank Martin Gibling, Mike Blum, and Jeffrey Nittrouer for constructive and critical reviews.Peer reviewedPublisher PD
Back-flow ripples in troughs downstream of unit bars: Formation, preservation and value for interpreting flow conditions
Back-flow ripples are bedforms created within the lee-side eddy of a larger bedform with migration directions opposed or oblique to that of the host bedform. In the flume experiments described in this article, back-flow ripples formed in the trough downstream of a unit bar and changed with mean flow velocity; varying from small incipient back-flow ripples at low velocities, to well-formed back-flow ripples with greater velocity, to rapidly migrating transient back-flow ripples formed at the greatest velocities tested. In these experiments back-flow ripples formed at much lower mean back-flow velocities than predicted from previously published descriptions. This lower threshold mean back-flow velocity is attributed to the pattern of velocity variation within the lee-side eddy of the host bedform. The back-flow velocity variations are attributed to vortex shedding from the separation zone, wake flapping and increases in the size of, and turbulent intensity within, the flow separation eddy controlled by the passage of superimposed bedforms approaching the crest of the bar. Short duration high velocity packets, whatever their cause, may form back-flow ripples if they exceed the minimum bed shear stress for ripple generation for long enough or, if much faster, may wash them out. Variation in back-flow ripple cross-lamination has been observed in the rock record and, by comparison with flume observations, the preserved back-flow ripple morphology may be useful for interpreting formative flow and sediment transport dynamics
Recognition of Face Identity and Emotion in Expressive Specific Language Impairment
Objective: To study face and emotion recognition in children with mostly expressive specific language impairment (SLI-E). Subjects and Methods: A test movie to study perception and recognition of faces and mimic-gestural expression was applied to 24 children diagnosed as suffering from SLI-E and an age-matched control group of normally developing children. Results: Compared to a normal control group, the SLI-E children scored significantly worse in both the face and expression recognition tasks with a preponderant effect on emotion recognition. The performance of the SLI-E group could not be explained by reduced attention during the test session. Conclusion: We conclude that SLI-E is associated with a deficiency in decoding non-verbal emotional facial and gestural information, which might lead to profound and persistent problems in social interaction and development. Copyright (C) 2012 S. Karger AG, Base
Bedforms and sedimentary structures related to supercritical flows in glacigenic settings
Upper-flow-regime bedforms, including upper-stage-plane beds, antidunes, chutes-and-pools and cyclic steps, are ubiquitous in glacigenic depositional environments characterized by abundant meltwater discharge and sediment supply. In this study, the depositional record of Froude near-critical and supercritical flows in glacigenic settings is reviewed, and similarities and differences between different depositional environments are discussed. Upper-flow-regime bedforms may occur in subglacial, subaerial and subaqueous environments, recording deposition by free-surface flows and submerged density flows. Although individual bedform types are generally not indicative of any specific depositional environment, some observed trends are similar to those documented in non-glacigenic settings. Important parameters for bedform evolution that differ between depositional environments include flow confinement, bed slope, aggradation rate and grain size. Cyclic-step deposits are more common in confined settings, like channels or incised valleys, or steep slopes of coarse-grained deltas. Antidune deposits prevail in unconfined settings and on more gentle slopes, like glacifluvial fans, sand-rich delta slopes or subaqueous (ice-contact) fans. At low aggradation rates, only the basal portions of bedforms are preserved, such as scour fills related to the hydraulic-jump zone of cyclic steps or antidune-wave breaking, which are common in glacifluvial systems and during glacial lake-outburst floods and (related) lake-level falls. Higher aggradation rates result in increased preservation potential, possibly leading to the preservation of complete bedforms. Such conditions are met in sediment-laden jökulhlaups and subaqueous proglacial environments characterized by expanding density flows. Coarser-grained sediment leads to steeper bedform profiles and highly scoured facies architectures, while finer-grained deposits display less steep bedform architectures. Such differences are in part related to stronger flows, faster settling of coarse clasts, and more rapid breaking of antidune waves or hydraulic-jump formation over hydraulically rough beds. © 2020 The Authors. Sedimentology published by John Wiley & Sons Ltd on behalf of International Association of Sedimentologist
Unit bar architecture in a highly‐variable fluvial discharge regime: Examples from the Burdekin River, Australia
Unit bars are relatively large bedforms that develop in rivers over a wide range of climatic regimes. Unit bars formed within the highly-variable discharge Burdekin River in Queensland, Australia, were examined over three field campaigns between 2015 and 2017. These bars had complex internal structures, dominated by co-sets of cross-stratified and planar-stratified sets. The cross-stratified sets tended to down-climb. The development of complex internal structures was primarily a result of three processes: (i) superimposed bedforms reworking the unit bar avalanche face; (ii) variable discharge triggering reactivation surfaces; and (iii) changes in bar growth direction induced by stage change. Internal structures varied along the length and across the width of unit bars. For the former, down-climbing cross-stratified sets tended to pass into single planar cross-stratified deposits at the downstream end of emergent bars; such variation related to changes in fluvial conditions whilst bars were active. A hierarchy of six categories of fluvial unsteadiness is proposed, with these discussed in relation to their effects on unit bar (and dune) internal structure. Across-deposit variation was caused by changes in superimposed bedform and bar character along bar crests; such changes related to the three-dimensionality of the channel and bar geometry when bars were active. Variation in internal structure is likely to be more pronounced in unit bar deposits than in smaller bedform (for example, dune) deposits formed in the same river. This is because smaller bedforms are more easily washed out or modified by changing discharge conditions and their smaller dimensions restrict the variation in flow conditions that occur over their width. In regimes where unit bar deposits are well-preserved, their architectural variability is a potential aid to their identification. This complex architecture also allows greater resolution in interpreting the conditions before and during bar initiation and development
Lithofacies uncertainty modeling in a siliciclastic reservoir setting by incorporating geological contacts and seismic information
Deterministic modeling lonely provides a unique boundary layout, depending on the geological interpretation or interpolation
from the hard available data. Changing the interpreter’s attitude or interpolation parameters leads to displacing the
location of these borders. In contrary, probabilistic modeling of geological domains such as lithofacies is a critical aspect
to providing information to take proper decision in the case of evaluation of oil reservoirs parameters, that is, applicable
for quantification of uncertainty along the boundaries. These stochastic modeling manifests itself dramatically beyond this
occasion. Conventional approaches of probabilistic modeling (object and pixel-based) mostly suffers from consideration
of contact knowledge on the simulated domains. Plurigaussian simulation algorithm, in contrast, allows reproducing the
complex transitions among the lithofacies domains and has found wide acceptance for modeling petroleum reservoirs.
Stationary assumption for this framework has implications on the homogeneous characterization of the lithofacies. In this
case, the proportion is assumed constant and the covariance function as a typical feature of spatial continuity depends only
on the Euclidean distances between two points. But, whenever there exists a heterogeneity phenomenon in the region, this
assumption does not urge model to generate the desired variability of the underlying proportion of facies over the domain.
Geophysical attributes as a secondary variable in this place, plays an important role for generation of the realistic contact
relationship between the simulated categories. In this paper, a hierarchical plurigaussian simulation approach is used to construct
multiple realizations of lithofacies by incorporating the acoustic impedance as soft data through an oil reservoir in Iran.This research was funded by the National Elites Foundation of Iran in collaboration with research Institute Petroleum of Industry in Iran under the project number of 9265005
Theoretical considerations on the indirect determination of anions : Determination of sulphate with barium chloranilate
Some anions (sulphate) may be determined by their reaction with a slightly dissociated or slightly soluble compound (barium chloranilate), another anion (chloranilate ion) being liberated and its extinction measured. An equation is given in this paper for the relationship between the concentration of sulphate and the extinction. For low concentrations the equation is non-linear. A calibration curve, prepared under standardised conditions, agrees well with theory. It shows a precision of about 5 % at 20 μg of sulphate. At higher levels the precision is slightly better. It is proved that many interferences of foreign ions may be explained quantitatively by consideration of the activity coefficients. The scope of this method is discussed
- …