Dry sliding wear behaviour of powder metallurgy Al-Mg-Si alloy-MoSi2 composites and the relationship with the microstructure

The effect of the microstructure on the dry sliding wear of six aluminium alloy 6061 matrix composites reinforced with 15vol.% of MoSi2 particles and two monolithic 6061 alloys processed by powder metallurgy with and without ball milling has been studied. Wear testing was undertaken using pin-on-ring configuration against an M2 steel counterface at 0.94m/s and normal load of 42, 91 and 140N. The wear resistance of the aluminium alloys was significantly improved by ball milling and the addition of reinforcing MoSi2 particles due to a more stable and more homogeneous microstructure, which avoids the detachment of the mechanically mixed layer. Wear rate of materials in T6 decreases as solutionized hardness of the materials increases. This behaviour is rationalized by taking into account the precipitation state of the matrix. In addition, wear rate follows a Hall-Petch type relationship, showing that the reduction of matrix grain size plays an important role in the increase in the wear resistance of the composites. The results indicate that the present intermetallic reinforced composites can be considered potential substitutes for ceramic reinforced aluminium alloys in tribological applications. © 2011 Elsevier B.V.Peer Reviewe

Whiskers of Al2O3 as reinforcement of a powder metallurgical 6061 aluminium matrix composite

An Al–Mg–Si alloy matrixcomposite reinforced with 10 vol.% of alumina whiskers (Al2O3w) has been processed by powder metallurgy and investigated. The Al2O3w were produced as single crystal c-axis alpha-alumina fibres at pre-pilot scale via vapour–liquid–solid (VLS) deposition in a cold-wall air-tight furnace with alumina linings. As far as we know, this is the first report of the utilization of whiskers of Al2O3 as reinforcing elements for Al alloys. Tensile tests have been performed on the composite at room and high temperatures. Results show that the AA6061 alloy reinforced with the as-produced Al2O3whiskers has remarkably high mechanical properties at room temperature. This is attributed to the high quality of the Al2O3 single crystals and to the strong bonding attained between them and the 6061 alloy matrixFinancial support of Spanish MEC, project MAT2006-01251, and regional government, Xunta de Galicia, PGIDT05TMT23902CTPeer reviewe

Psychosocial outcomes of an inclusive adapted sport and adventurous training course for military personnel.

PURPOSE: To explore the psychosocial outcomes of an inclusive adapted sport and adventurous training course that aims to support the rehabilitation and personal development of military personnel who have sustained physical and/or psychological disability. METHOD: Narrative life story interviews were conducted with 11 men aged 20-43 taking part in one of the 5-day courses. A thematic narrative analysis was conducted, focusing on accounts that provided insights into personally meaningful psychosocial outcomes of the course. FINDINGS: We identified six themes, falling into two distinct clusters. "Bringing me back to myself" was achieved through the themes of (1) returning to activity, (2) rediscovering a sense of purpose, and (3) reconnecting to others. "New rooms to explore" was realised through (4) experiencing new activities, (5) being valued/respected/cared for and (6) being inspired by other people. CONCLUSION: Involvement in the course stimulated a balance of present- and future-oriented psychosocial outcomes through which participants both recreated aspects of themselves that had been lost through injury/trauma and moved forward with their lives as a result of new horizons of possibility. IMPLICATIONS FOR REHABILITATION: This 5-day inclusive adapted sport and adventurous training course offered meaningful psychosocial outcomes among military personnel who had experienced physical and/or psychological disability. The course helped participants recover aspects of their previous life and self through becoming physically active again, rediscovering a sense of purpose and reconnecting to others. Participants describe a broadening of life horizons as a result of the course, through new activities, being valued/respected/cared for, and being inspired by other people

We haven't got a seat on the bus for you or All the seats are mine: Narratives and career transitions in professional golf

In this article we explore how the stories an athlete tells throughout life in sport affect her career transition experiences. We base our enquiry on a social constructionist conception of narrative theory which holds that storytelling is integral to the creation and maintenance of identity and sense of self. Life stories were gathered through interviews with two professional women golfers (Christiana and Kandy) over a six‐year period. Through a narrative analysis of structure and form we explored each participant’s stories of living in and withdrawing from professional golf. We suggest Christiana told monological performance‐oriented stories which, while aligning with the culture of elite sport, resulted in an exclusive athletic identity and foreclosure of alternative selves and roles. On withdrawal, Christiana experienced narrative wreckage, identity collapse, mental health difficulties and considerable psychological trauma. In contrast, Kandy told dialogical discovery‐oriented stories which, while being in tension with the dominant performance narrative, created and sustained a multidimensional identity and self. Her stories and identity remained intact, authentic and continuous on withdrawal from tournament golf and she experienced few psychological problems

Narrative, identity, and recovery from serious mental illness: A life history of a runner

In recent years, researchers have investigated the psychological effects of exercise for people with mental health problems, often by focusing on how exercise may alleviate symptoms of mental illness. In this article I take a different tack to explore the ways in which exercise contributed a sense of meaning, purpose, and identity to the life of one individual named Ben, a runner diagnosed with schizophrenia. Drawing on life history data, I conducted an analysis of narrative to explore the narrative types that underlie Ben's stories of mental illness and exercise. For Ben, serious mental illness profoundly disrupted a pre-existing athletic identity removing agency, continuity, and coherence from his life story. By returning to exercise several years later, Ben reclaimed his athletic identity and reinstated some degree of narrative agency, continuity, and coherence. While the relationships between narrative, identity, and mental health are undoubtedly complex, Ben's story suggests that exercise can contribute to recovery by being a personally meaningful activity which reinforces identity and sense of self

Stories of success: Cultural narratives and personal stories of elite and professional athletes

Using a narrative methodology to explore the stories Olympic and elite athletes tell about success, we identified three alternatives to the dominant conception of success as the achievement of performance outcomes. In these alternatives, success is storied as: (1) ‘I did the best that I could’ – a controllable and sustainable story of effort and application; (2) ‘It’s the closest thing you can get to flying’ – a story where success relates to embodied experience and discovery; (3) ‘People I made the journey with’ – which prioritises relationships and connection between people. We reflect on three key insights: (1) success is a multidimensional concept, broader than the singular conception encapsulated within the dominant performance narrative; (2) through various narrative strategies, experienced athletes resist cultural pressures towards a singular conception of success; (3) for long-term performance and well-being, it is necessary to work towards multiple forms of success over time and across contexts

Extrusion of Ingot and Powder Metallurgy Aluminum Matrix Composites Profiles

Several profiles with the same extrusion ratio were extruded from three monolithic alloys and five aluminum matrix composites (AMCs) prepared by ingot and powder metallurgy (PM). Specifically, AA6061 and AA6063 were reinforced by 10 and 25 vol.% of Al2O3 and MoSi2 intermetallic particles. To study the wear of the dies, high temperature pin-on-disk tests were performed. The results show that the composite profiles present high surface and dimensional quality and that the die steel wears slightly more against the cast composite. Maximum extrusion pressure (Pmax) depends on profile shape and increases in the following order: bar, T, L and U, and tube. It also increases as volume fraction of reinforcement increases. In general, cast materials are easier to extrude than PM ones, and MoSi2 reinforced AMCs are easier to extrude than Al2O3 ones. AMCs processed by PM have significantly higher hardness than the cast AMC and the monolithic alloys. The PM composites do not need any heat treatment to acquire maximum hardness. By adding reinforcing particles to aluminum, a significant increase in tensile strength and stiffness occur. The high tensile strength and modulus of the present PM composites, without a decrease in specific properties, makes these AMCs interesting for structural applications.Spanish project TRACE2009_0251 from MICINN, Spain, and EXTRUGASA, Galicia, Spain, are gratefully acknowledged. Thanks are also due to Amalia San Román and Miguel Acedo for their help with the experimental work.Peer reviewe

Science lives: School choices and ‘natural tendencies’

An analysis of 12 semi-structured interviews with university-based scientists and non-scientists illustrates their life journeys towards, or away from, science and the strengths and impact of life occurrences leading them to choose science or non-science professions. We have adopted narrative approaches and used Mezirow's transformative learning theory framework. The areas of discussion from the result have stressed on three main categories that include ‘smooth transition’, ‘incremental wavering transition' and ‘transformative transition’. The article concludes by discussing the key influences that shaped initial attitudes and direction in these people through natural inclination, environmental inspirations and perceptions of science

Curve counting via stable pairs in the derived category

For a nonsingular projective 3-fold $X$, we define integer invariants virtually enumerating pairs $(C,D)$ where $C\subset X$ is an embedded curve and $D\subset C$ is a divisor. A virtual class is constructed on the associated moduli space by viewing a pair as an object in the derived category of $X$. The resulting invariants are conjecturally equivalent, after universal transformations, to both the Gromov-Witten and DT theories of $X$. For Calabi-Yau 3-folds, the latter equivalence should be viewed as a wall-crossing formula in the derived category. Several calculations of the new invariants are carried out. In the Fano case, the local contributions of nonsingular embedded curves are found. In the local toric Calabi-Yau case, a completely new form of the topological vertex is described. The virtual enumeration of pairs is closely related to the geometry underlying the BPS state counts of Gopakumar and Vafa. We prove that our integrality predictions for Gromov-Witten invariants agree with the BPS integrality. Conversely, the BPS geometry imposes strong conditions on the enumeration of pairs.Comment: Corrected typos and duality error in Proposition 4.6. 47 page