159 research outputs found
Seismic Microzonation of the City of Puebla, Mexico
We gathered information concerning the seismic response of the city of Puebla including: surface geology and hydrology, bore-hole data, damage information for two destructive earthquakes, and earthquake records in four strong motion instruments that have operated in the city. Additional data was obtained from three experiments: microtremor measurements in 39 points within the urban zone; installation and operation of a temporal digital seismograph network; a small scale refraction experiment. Consideration of all data together allows to draw a coherent picture of site effects in the urban zone. Based on these results, we propose a preliminary seismic microzonation map for the city of Puebla
On the behavior of site effects in central Mexico (the Mexican volcanic belt – MVB), based on records of shallow earthquakes that occurred in the zone between 1998 and 2011
The Mexican volcanic belt (MVB) is a seismogenic zone that transects the
central part of Mexico with an east–west orientation. The seismic risk and
hazard of this seismogenic zone has not been studied in detail due to the
scarcity of instrumental data as well as because seismicity in the
continental regime of central Mexico is not too frequent. However, it is
known that there are precedents of large earthquakes (<i>M</i><sub>w</sub> > 6.0)
that have taken place in this zone. The valley of Mexico City (VM) is the
sole zone, within the MVB, that has been studied in detail. Studies have
mainly focused on the ground amplification during large events such as the
1985 subduction earthquake that occurred off coast of Michoacán. The
purpose of this article is to analyze the behavior of site effects in the MVB
zone based on records of shallow earthquakes (data not reported before) that
occurred in the zone between 1998 and 2011. We present a general overview of
site effects in the MVB, a classification of the stations in order to reduce
the uncertainty in the data when obtaining attenuation parameters in future
works, as well as some comparisons between the information presented here and
that presented in previous studies.
<br><br>
A regional evaluation of site effects and Fourier acceleration spectrum
(FAS) shape was estimated based on 80 records of 22 shallow earthquakes
within the MVB zone. Data of 25 stations were analyzed. Site effects were
estimated by using the horizontal-to-vertical spectral ratio (HVSR)
methodology. The results show that seismic waves are less amplified in the
northeast sites of the MVB with respect to the rest of the zone and that it
is possible to classify two groups of stations: (1) stations with negligible
site amplification (NSA) and (2) stations with significant site amplification
(SSA). Most of the sites in the first group showed small (<3)
amplifications while the second group showed amplifications ranging from 4
to 6.5 at frequencies of about 0.35, 0.75, 15 and 23 Hz. With these groups
of stations, average levels of amplification were contrasted for the first
time with those caused by the subduction zone earthquakes. With respect to
the FAS shapes, most of them showed similarities at similar epicentral
distances. Finally, some variations of site effects were found when compared
to those obtained in previous studies on different seismicity regions. These
variations were attributed to the location of the source.
<br><br>
These aspects help to advance the understanding about the amplification
behavior and of the expected seismic risk on central Mexico due to large
earthquakes within the MVB seismogenic zone
Millora del nivell de formaciĂł realitzan prĂ ctiques en Serveis de Suport a la Recerca. Un cas prĂ ctic real
La motivaciĂł del present projecte Ă©s intentar aprofitar els recursos de que disposa el SAQ per a que alumnes de diferents titulacions (QuĂmiques, Ciències Ambientals i Enginyeria QuĂmica) puguin fer prĂ ctiques d'anĂ lisi instrumental amb aparells de caracterĂstiques similars als que es trobaran quan surtin de la Universitat i tractant els problemes analĂtics amb una perspectiva globa
Derivation of consistent hard rock (1000<Vs<3000 m/s) GMPEs from surface and down-hole recordings: Analysis of KiK-net data
A key component in seismic hazard assessment is the estimation of ground motion for hard rock sites, either for applications to installations built on this site category, or as an input motion for site response computation. Empirical ground motion prediction equations (GMPEs) are the traditional basis for estimating ground motion while VS30 is the basis to account for site conditions. As current GMPEs are poorly constrained for VS30 larger than 1000 m/s, the presently used approach for estimating hazard on hard rock sites consists of “host-to-target” adjustment techniques based on VS30 and κ0 values. The present study investigates alternative methods on the basis of a KiK-net dataset corresponding to stiff and rocky sites with 500 < VS30 < 1350 m/s. The existence of sensor pairs (one at the surface and one in depth) and the availability of P- and S-wave velocity profiles allow deriving two “virtual” datasets associated to outcropping hard rock sites with VS in the range [1000, 3000] m/s with two independent corrections: 1/down-hole recordings modified from within motion to outcropping motion with a depth correction factor, 2/surface recordings deconvolved from their specific site response derived through 1D simulation. GMPEs with simple functional forms are then developed, including a VS30 site term. They lead to consistent and robust hard-rock motion estimates, which prove to be significantly lower than host-to-target adjustment predictions. The difference can reach a factor up to 3–4 beyond 5 Hz for very hard-rock, but decreases for decreasing frequency until vanishing below 2 Hz
Application of Surface wave methods for seismic site characterization
Surface-wave dispersion analysis is widely used in geophysics to infer a shear wave velocity model of the subsoil for a wide variety of applications. A shear-wave velocity model is obtained from the solution of an inverse problem based on the surface wave dispersive propagation in vertically heterogeneous media. The analysis can be based either on active source measurements or on seismic noise recordings. This paper discusses the most typical choices for collection and interpretation of experimental data, providing a state of the art on the different steps involved in surface wave surveys. In particular, the different strategies for processing experimental data and to solve the inverse problem are presented, along with their advantages and disadvantages. Also, some issues related to the characteristics of passive surface wave data and their use in H/V spectral ratio technique are discussed as additional information to be used independently or in conjunction with dispersion analysis. Finally, some recommendations for the use of surface wave methods are presented, while also outlining future trends in the research of this topic
- …