Three-dimensional finite element analysis of anterior two-unit cantilever resin-bonded fixed dental prostheses

The aim of this study was to evaluate the influence of different framework materials on biomechanical behaviour of anterior two-unit cantilever resin-bonded fixed dental prostheses (RBFDPs). A three-dimensional finite element model of a two-unit cantilever RBFDP replacing amaxillary lateral incisorwas created. Five frameworkmaterialswere evaluated: direct fibre-reinforced composite (FRC-Z250), indirect fibre-reinforced composite (FRC-ES), gold alloy (M), glass ceramic (GC), and zirconia (ZI). Finite element analysis was performed and stress distribution was evaluated. A similar stress pattern, with stress concentrations in the connector area, was observed in RBFDPs for all materials.Maximal principal stress showed a decreasing order: ZI >M>GC> FRC-ES > FRCZ250. The maximum displacement of RBFDPs was higher for FRC-Z250 and FRC-ES than for M, GC, and ZI. FE analysis depicted differences in location of the maximum stress at the luting cement interface between materials. For FRC-Z250 and FRC-ES, the maximum stress was located in the upper part of the proximal area of the retainer, whereas, for M, GC, and ZI, the maximum stress was located at the cervical outline of the retainer. The present study revealed differences in biomechanical behaviour between all RBFDPs.The general observation was that a RBFDP made of FRC provided a more favourable stress distribution

Evaluation of bis-GMA/MMA resin adhesion to silica-coated and silanized titanium

The effects of pH value and alcohol solvent type of a silane solution on the bonding of an experimental resin to the silica-coated titanium (Ti) surface were studied. First, Ti surfaces underwent tribochemical Rocatec ™ treatment followed by silanization of the surface with 3-methacryloxypropyltrimethoxysilane (MPS). Then, resin stubs based on a mixture of bisphenol-A-glycidyl dimethacrylate and methyl methacrylate were bonded and light-cured onto each silica-coated Ti surface (n = 6 per group). Two different solvents for MPS, namely iso-propanol (i-PrOH)/H2O and ethanol (EtOH)/H2O were used, at pH values of 4.5, 5.0, and 5.5, and shear bond strengths were tested both under dry storage conditions and after water sorption induced by accelerated aging (i.e. thermo-cycling). The shear bond strengths were also re-determined after the silane solutions had been stored at 4°C for 15 weeks before the silanization step. For dry samples, the shear bond strengths ranged from 7.5 to 10.6 MPa (ANOVA, p < 0.05) when the Ti surface had been silanized with MPS in i-PrOH/H2O, and from 6.5 to 12.4 MPa (ANOVA, p < 0.05) when the Ti surface had been silanized with MPS in EtOH/H2O at pH 4.5. Fifteen weeks of storage of the silane solution increased the shear bond strength of dry samples by ca. 1-4 MPa per test group. In contrast, thermo-cycling reduced the shear bond strength in both solvent systems. The weight of the test sample stubs increased by ca. 3.5 wt% after 187 days of being subjected to the water sorption test. © 2009 VSP.postprin

Quark cluster signatures in deuteron electromagnetic interactions

A suggestion is made for distinguishing 2N and 6q short range correlations within the deuteron. The suggestion depends upon observing high momentum backward nucleons emerging from inelastic electromagnetic scattering from a deuteron target. A simple model is worked out to see the size of effects that may be expected.Comment: 18 pages (3 figures available as hard copy), WM-94-10

Occipital condyle fracture-A rare but severe injury in cranial fracture patients

We clarified occurrence, severity, and associated injuries of occipital condyle fractures (OCFs) in a cranial fracture population. Retrospective data of cranial fracture patients were analyzed. The outcome variable was presence of OCF in cranial fracture patients. Predictor variables were type of associated injury, Glasgow Coma Scale (GCS) value under 6, and death during hospital care. In addition, occurrence of OCF was assessed according to cranial fracture subtypes. Explanatory variables were age, sex, injury mechanism, involvement of alcohol, and high-energy injury. Treatment and outcome of OCFs were analyzed. Of 637 cranial fracture patients, 19 (3.0%) sustained an OCF, eight of whom had no other cranial fractures. In the multivariate adjusted model, increased risk for OCF was detected in patients with cervical injuries (OR 18.66, 95% CI 5.52, 63.12; p < 0.001) and facial fractures (OR 5.99, 95% CI 1.01, 35.45; p = 0.049). Patients with fractures not extending to the skull base were less likely to have OCF (OR 0.01, 95% CI 0.001, 0.25; p = 0.004), and fractures localized solely to the base of the skull offered a protective effect for OCF (OR 0.19, 95% CI 0.06, 0.58; p = 0.003). All OCFs were treated non-operatively with a cervical collar without complications. OCF patients typically sustain other severe injuries, particularly cervical injuries and facial fractures. Careful screening for associated injuries is therefore crucial when examining a patient with OCF. The classification scheme of Mueller et al. seems to be useful in guiding the treatment of OCFs, at least type 1 and 2 fractures. (C) 2021 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.Peer reviewe

Cellulose Fibre-Reinforced Biofoam for Structural Applications

Traditionally, polymers and macromolecular components used in the foam industry are mostly derived from petroleum. The current transition to a bio-economy creates demand for the use of more renewable feedstocks. Soybean oil is a vegetable oil, composed mainly of triglycerides, that is suitable material for foam production. In this study, acrylated epoxidized soybean oil and variable amounts of cellulose fibres were used in the production of bio-based foam. The developed macroporous bio-based architectures were characterised by several techniques, including porosity measurements, nanoindentation testing, scanning electron microscopy, and thermogravimetric analysis. It was found that the introduction of cellulose fibres during the foaming process was necessary to create the three-dimensional polymer foams. Using cellulose fibres has potential as a foam stabiliser because it obstructs the drainage of liquid from the film region in these gas-oil interfaces while simultaneously acting as a reinforcing agent in the polymer foam. The resulting foams possessed a porosity of approximately 56%, and the incorporation of cellulose fibres did not affect thermal behaviour. Scanning electron micrographs showed randomly oriented pores with irregular shapes and non-uniform pore size throughout the samples

Experimental and Theoretical Results for Weak Charge Current Backward Proton Production

In this paper, we do three things in the study of deuteron break-up by high energy neutrino beams. (1) We present previously unpublished data on neutrino induced backward protons from deuteron targets; (2) we calculate the contributions from both the two-nucleon (2N) and six-quark (6q) deuteron components, which depend upon the overall normalization of the part that is 6q; and (3) we suggest other signatures for distinguishing the 2N and 6q clusters. We conclude that the 6q cluster easily explains the shape of the high momentum backward proton spectrum, and its size is nicely explained if the amount of 6q is one or a few percent by normalization of the deuteron. There is a crossover, above which the 6q contribution is important or dominant, at 300--400 MeV/c backward proton momentum.Comment: 8 pages, 5 figure

Flexural properties of fiber reinforced root canal posts.

AbstractOBJECTIVES: Fiber-reinforced composite (FRC) root canal posts have been introduced to be used instead of metal alloys and ceramics. The aim of this study was to investigate the flexural properties of different types of FRC posts and compare those values with a novel FRC material for dental applications.METHODS: Seventeen different FRC posts of various brands (Snowpost, Carbopost, Parapost, C-post, Glassix, Carbonite) and diameters, (1.0-2.1 mm) and a continuous unidirectional E-glass FRC polymerized by light activation to a cylindrical form (everStick, diameter 1.5 mm) as a control material were tested. The posts (n=5) were stored at room's humidity or thermocycled (12.000 x, 5 degrees C/55 degrees C) and stored in water for 2 weeks before testing. A three-point bending test (span=10 mm) was used to measure the flexural strength and modulus of FRC post specimens.RESULTS: Analysis of ANOVA revealed that thermocycling, brand of material and diameter of specimen had a significant effect (p<0.001) on the fracture load and flexural strength. The highest flexural strength was obtained with the control material (everStick, 1144.9+/-99.9 MPa). There was a linear relationship between fracture load and diameter of posts for both glass fiber and carbon fiber posts. Thermocycling decreased the flexural modulus of the tested specimens by approximately 10%. Strength and fracture load decreased approximately 18% as a result of thermocycling.SIGNIFICANCE: Considerable variation can be found in the calculated strength values of the studied post brands. Commercial prefabricated FRC posts showed lower flexural properties than an individually polymerised FRC material.</div

The effect of chlorhexidine and dimethyl sulfoxide on long-term sealing ability of two calcium silicate cements in root canal

Objectives. To evaluate the long-term effect of chlorhexidine (CHX) and dimethyl sulfoxide (DMSO) on the sealing ability and biomineralization of two different calcium silicate cements (CSC) in root canal. Methods. Sixty human third molar root canals were obturated with ProRoot MTA or Biodentine. Before obturation the canals were irrigated with saline (control), 2% CHX or 5% DMSO. Microleakage was tested after three days and after six months. After additional six months (12 months after root filling) the roots were cut into 2 mm thick dentine discs. The discs were stored in artificial saliva for one year. The bond strength was measured with the push-out method, and the failure mode was evaluated with a stereomicroscope. The most apical disc of each tooth was used for Vickers hardness test. Results. No significant differences between the groups was found in initial microleakage. The leakage increased significantly during the 6-month storage in all groups except in Biodentine-CHX group and Biodentine-DMSO group. CHX and DMSO irrigation significantly increased the leakage with ProRoot MTA with time, but there was no statistically significant difference compared to the ProRoot MTA-control group at six months' time point. CHX significantly reduced the push-out bond strength of ProRoot MTA. With Biodentine irrigation with CHX or DMSO resulted with significantly higher push-out strength compared to the Biodentine control group. Fracture analysis showed statistically significant difference in the distribution of the fractures between the groups, but neither CHX nor DMSO change the fracture pattern statistically significantly. With Vickers hardness test ProRoot MTA with and without DMSO as the final irrigant showed significantly higher dentin hardness than any Biodentine-group. Significance. Considering that aging increased the leakage in all groups except with Biodentine-DMSO and the differences in the push-out strength and surface microhardness data, it appears that the time-related biomineralizing effect of MTA and Biodentine does not improve sealing to dentin. CHX significantly reduced ProRoot MTA bond strength and increased pure adhesive failures with both cements. (C) 2020 Published by Elsevier Inc. on behalf of The Academy of Dental Materials.Peer reviewe

The effect of chlorhexidine and dimethyl sulfoxide on long-term sealing ability of two calcium silicate cements in root canal

Objectives. To evaluate the long-term effect of chlorhexidine (CHX) and dimethyl sulfoxide (DMSO) on the sealing ability and biomineralization of two different calcium silicate cements (CSC) in root canal. Methods. Sixty human third molar root canals were obturated with ProRoot MTA or Biodentine. Before obturation the canals were irrigated with saline (control), 2% CHX or 5% DMSO. Microleakage was tested after three days and after six months. After additional six months (12 months after root filling) the roots were cut into 2 mm thick dentine discs. The discs were stored in artificial saliva for one year. The bond strength was measured with the push-out method, and the failure mode was evaluated with a stereomicroscope. The most apical disc of each tooth was used for Vickers hardness test. Results. No significant differences between the groups was found in initial microleakage. The leakage increased significantly during the 6-month storage in all groups except in Biodentine-CHX group and Biodentine-DMSO group. CHX and DMSO irrigation significantly increased the leakage with ProRoot MTA with time, but there was no statistically significant difference compared to the ProRoot MTA-control group at six months' time point. CHX significantly reduced the push-out bond strength of ProRoot MTA. With Biodentine irrigation with CHX or DMSO resulted with significantly higher push-out strength compared to the Biodentine control group. Fracture analysis showed statistically significant difference in the distribution of the fractures between the groups, but neither CHX nor DMSO change the fracture pattern statistically significantly. With Vickers hardness test ProRoot MTA with and without DMSO as the final irrigant showed significantly higher dentin hardness than any Biodentine-group. Significance. Considering that aging increased the leakage in all groups except with Biodentine-DMSO and the differences in the push-out strength and surface microhardness data, it appears that the time-related biomineralizing effect of MTA and Biodentine does not improve sealing to dentin. CHX significantly reduced ProRoot MTA bond strength and increased pure adhesive failures with both cements. (C) 2020 Published by Elsevier Inc. on behalf of The Academy of Dental Materials.Peer reviewe