Analysis of thin-film structures with nuclear backscattering and x-ray diffraction

Backscattering of MeV ^(4)He ions and Seemann-Bohlin x-ray diffraction techniques have been used to study silicide formation on Si and SiO_2 covered with evaporated metal films. Backscattering techniques provide information on the composition of thin-film structures as a function of depth. The glancing-angle x-ray technique provides identification of phases and structural information. Examples are given of V on Si and on SiO_2 to illustrate the major features of these analysis techniques. We also give a general review of recent studies of silicide formation

Fate and Impacts of Triclosan, Sulfamethoxazole, and 17β-estradiol during Nutrient Recovery via ion Exchange and Struvite Precipitation

Increasing emphasis on resource recovery from wastewater highlights the importance of capturing valuable products, e.g., nutrients such as nitrogen and phosphorus, while removing contaminants, e.g., organic micropollutants. The objective of this research was to evaluate the fate of the micropollutants triclosan (present as a mixture of neutral and anionic species at neutral pH), 17β-estradiol (neutral at neutral pH), and sulfamethoxazole (anionic at neutral pH) during nutrient recovery using ion exchange-precipitation. Adsorption of the three micropollutants to the phosphate-selective ion exchange resins LayneRT and DOW-HFO-Cu ranged from 54% to 88% in Milli-Q water tests and 50% to 71% in wastewater tests using anaerobic effluent. The micropollutants did not sorb to the ammonium-selective exchanger, clinoptilolite. The presence of the micropollutants reduced the kinetic rates of nutrient exchange onto ion exchangers. However, the micropollutants did not interfere with nutrient capacity on the ion exchangers, likely due to the low concentration of micropollutants and potentially different mechanisms of adsorption (i.e., Coulombic and non-Coulombic attractions for micropollutants) compared to the target ions. Micropollutants that sorbed to the phosphate exchangers were released with phosphate ions during regeneration. Concentrations of NaOH and NaCl in regeneration solutions did not correlate with micropollutant desorption. Among the micropollutants studied, the more hydrophobic triclosan and 17β-estradiol adsorbed to the resins to greater extents. These compounds also demonstrated lower desorption rates than sulfamethoxazole during regeneration in Milli-Q water tests. Batch struvite precipitation tests revealed that the micropollutants were not enmeshed in precipitated struvite crystals nor sorbed during crystallization, indicating that the struvite product was free of triclosan, 17β-estradiol, and sulfamethoxazole

Biosolids-Derived Biochar for Triclosan Removal from Wastewater

Micropollutants, including antibiotics, hormones, pharmaceuticals, and personal care products, are discharged into the environment with liquid and solid effluent streams from water resource recovery facilities (WRRFs). The objective of this research was to determine whether biosolids-derived biochar (BS-biochar) could be used as a sorbent in continuous flow-through columns to remove micropollutants as a polishing step for wastewater treatment. Triclosan (TCS) was selected as a representative micropollutant due to frequent detection in liquid effluents, residual biosolids, and surface waters. Bench-scale column experiments were conducted to determine the effect of flow rate and competition due to the presence of other organic micropollutants and inorganic nutrients on TCS adsorption to BS-biochar. TCS removal efficiency was compared in Milli-Q water and secondary wastewater effluent by using two commercial adsorbents: a granular activated carbon and a wood-based biochar. Increased removal of TCS was observed at lower flow rates (2.6 gpm/ft2) compared with higher flow rates (10.3 gpm/ft2). Presence of inorganic nutrients (NH4+ and PO43−) and organic micropollutants 17β-estradiol and sulfamethoxazole decreased adsorption of TCS to BS-biochar. TCS was sorbed to BS-biochar in wastewater, but percent removal decreased in wastewater relative to Milli-Q water. This study demonstrated that BS-biochar can remove TCS from wastewater in continuous flow-through columns, although to a lesser extent than activated carbon. An additional benefit of using BS-biochar is that WRRFs could re-activate biochar on-site by using a pyrolysis reactor

Ion Exchange for Nutrient Recovery Coupled with Biosolids-Derived Biochar Pretreatment to Remove Micropollutants

Wastewater, especially anaerobic treatment effluent, contains high ammonia nitrogen (NH4-N) and inorganic orthophosphate (PO4-P), which necessitate additional treatment to meet stringent discharge regulations. Ion exchange regeneration is a process that can be adopted for not only removing but also recovering nutrients. However, recovering nutrients by ion exchange from nutrient-rich effluents that also contain micropollutants (which typically pass through anaerobic treatment as well) may result in subsequent problems, since micropollutants could end up in ion exchange effluent, regenerant, or recovered fertilizer products. Micropollutant removal by a nonselective adsorbent, such as biosolids-derived biochar, before nutrient recovery processes would mitigate potential risks. The objective of this research was to evaluate the capability of biosolids-derived biochar as a pretreatment step for separating micropollutants from nutrient-rich water before ion exchange for nutrient recovery. In the presence of ammonium and phosphate, both pristine and regenerated biosolids-derived biochar could effectively adsorb triclosan (TCS) and estradiol (E2), and to a lesser extent, sulfamethoxazole (SMX) in batch sorption experiments. On the other hand, nutrient ions were not effectively adsorbed by biosolids-derived biochar. A continuous flow-through system consisting of columns in series filled with biochar, LayneRT, and then clinoptilolite was operated to test selective removal of micropollutants and nutrients in a flow-through system. The biochar column achieved more than 80% removal of influent TCS and E2, thereby reducing the chances of micropollutants being adsorbed by ion exchangers. Sulfamethoxazole removal through the biochar column was only 50%, indicating that biosolids-derived biochar would have to be optimized in the future for hydrophilic micropollutant removal. Influent nutrients were not effectively removed by the biochar column, but were captured in their respective selective ion exchanger columns. This research revealed that biosolids-derived biochar could be employed before ion exchange resins for removal of micropollutants from nutrient-rich water

The Emotional Self-Efficacy Scale: Adaptation and Validation for Young Adolescents

Emotional self-efficacy (ESE) is an important aspect of emotional functioning, with current measures for children and adolescents focused on the measurement of self-beliefs in relation to the management of emotions. In the present study, we report the psychometric properties of the first adaptation of the Emotional Self-Efficacy Scale for youth (Youth-ESES) that measures additional aspects of ESE, such as perceiving and understanding emotions and helping others modulate their emotions. Participants were 192 young adolescents aged 11 to 13 years from a U.K. state school. They completed the Youth-ESES and measures of ability emotional intelligence (EI) and cognitive ability. Results support the same four-factor structure that has been previously documented using the adult version of the ESES, with the four subscales being largely independent from cognitive ability and only moderately related to ability EI. However, the four subscales were less differentiated in the present study compared with adult data previously published, suggesting that there is a strong general factor underlying young adolescents’ ESE scores. Overall, the results suggest that the adapted Youth-ESES can be reliably used with youth, and that confidence in how a young person feels about his or her emotional functioning remains distinct from emotional skill

Potential of different composts to improve soil fertility

Composts can influence soil fertility and plant health. These influences can be positive or negative, depending of the quality of the composts. Some practitioners already make use of the positive effects on plant health. For example, they use composts to protect their plants against soil borne diseases in substrate, or to detoxify and reactivate soil after steaming. In order to estimate the potential of Swiss composts to influence soil fertility and plant health positively, we analyzed one hundred composts representative of the different composting systems and qualities available on the market. The organic substance and the nutrient content of the composts varied greatly between the composts; the materials of origin were the major factor influencing these values. The respiration rate and enzyme activities also varied greatly, particularly in the youngest composts. These differences become smaller when the composts become more mature. Maturity, the degradation stage of the organic matter, depended not only on the age of the compost, but also on the management of the process. The N-mineralization potential from compost added to soil showed that a high proportion of young composts immobilized the nitrogen in the soil. This problem was hardly correlated with the materials of origin, but with the management of the first stage of the composting process. Especially composts which had become too dry in this period lost their ammonia-nitrogen, and hence immobilized nitrogen in the soil. Also composts with a low NO3/NH4 ratio, as a rough indicator for an immature compost, immobilized nitrogen in the soil. By contrast, the phytotoxicity of the composts varied very much also in matured composts, showing that the storage of the compost plays a decisive role. While the majority of compost protected cucumber plants against Pythium ultimum, only a few composts suppressed Rhizoctonia solani in basil. With respect to disease suppression, the management of the maturation process seems to play a major role. In conclusion, big differences in compost quality and of their impact on soil fertility and on plant health were observed. The management of the composting process seems to influence the quality of the composts to a higher extent than the materials of origin or the composting system. More attention should be paid to biological quality of composts, in order to produce composts with more beneficial effects on crops

Ti and V layers retard interaction between Al films and polycrystalline Si

Fine-grained polycrystalline Si (poly Si) in contact with Al films recrystallizes at temperatures well below the Si-Al eutectic (577 °C). We show that this interaction can be deferred or suppressed by placing a buffer layer of Ti or V between the Al film and the poly Si. During annealing, Ti or V form TiAl3 or Val3 at the buffer-layer–Al-film interface, but do not react with the poly Si so that the integrity of the poly Si is preserved as long as some unreacted Ti or V remains. The reaction between the Ti or V layer and the Al film is transport limited ([proportional]t^1/2) and characterized by the diffusion constants 1.5×10^15 exp(–1.8eV/kT) Å^2/sec or 8.4×10^12 exp(–1.7eV/kT) Å^2/sec, respectively

Spatial and labor market contributions to earnings inequality: an overview

Wages ; Labor market ; Income distribution