3,327 research outputs found
Cumulate causes for the low contents of sulfide-loving elements in the continental crust
Despite the economic importance of chalcophile (sulfide-loving) and siderophile (metal-loving) elements (CSEs), it is unclear how they become enriched or depleted in the continental crust, compared with the oceanic crust. This is due in part to our limited understanding of the partitioning behaviour of the CSEs. Here I compile compositional data for mid-ocean ridge basalts and subduction-related volcanic rocks. I show that the mantle-derived melts that contribute to oceanic and continental crust formation rarely avoid sulfide saturation during cooling in the crust and, on average, subduction-zone magmas fractionate sulfide at the base of the continental crust prior to ascent. Differentiation of mantle-derived melts enriches lower crustal sulfide- and silicate-bearing cumulates in some CSEs compared with the upper crust. This storage predisposes the cumulate-hosted compatible CSEs (such as Cu and Au) to be recycled back into the mantle during subduction and delamination, resulting in their low contents in the bulk continental crust and potentially contributing to the scarcity of ore deposits in the upper continental crust. By contrast, differentiation causes the upper oceanic and continental crust to become enriched in incompatible CSEs (such as W) compared with the lower oceanic and continental crust. Consequently, incompatible CSEs are predisposed to become enriched in subduction-zone magmas that contribute to continental crust formation and are less susceptible to removal from the continental crust via delamination compared with the compatible CSEs
The percutaneous absorption of soman in a damaged skin porcine model and the evaluation of WoundStatâ„¢ as a topical decontaminant
PURPOSE: The aim of this study was to evaluate a candidate haemostat (WoundStat™), down-selected from previous in vitro studies, for efficacy as a potential skin decontaminant against the chemical warfare agent pinacoyl methylfluorophosphonate (Soman, GD) using an in vivo pig model. MATERIALS AND METHODS: An area of approximately 3 cm2 was dermatomed from the dorsal ear skin to a nominal depth of 100 µm. A discrete droplet of 14C-GD (300 µg kg-1) was applied directly onto the surface of the damaged skin at the centre of the dosing site. Animals assigned to the treatment group were given a 2 g application of WoundStat™ 30 s after GD challenge. The decontamination efficacy of WoundStat™ against GD was measured by the direct quantification of the distribution of 14C-GD, as well as routine determination of whole blood cholinesterase and physiological measurements. RESULTS: WoundStat™ sequestered approximately 70% of the applied 14C-GD. Internal radiolabel recovery from treated animals was approximately 1% of the initially applied dose. Whole blood cholinesterase levels decreased to less than 10% of the original value by 15 min post WoundStat™ treatment and gradually decreased until the onset of apnoea or until euthanasia. All treated animals showed signs of GD intoxication that could be grouped into early (mastication, fasciculations and tremor), intermediate (miosis, salivation and nasal secretions) and late onset (lacrimation, body spasm and apnoea) effects. Two of the six WoundStat™ treated animals survived the study duration. CONCLUSIONS: The current study has shown that the use of WoundStat™ as a decontaminant on damaged pig ear skin was unable to fully protect against GD toxicity. Importantly, the findings indicate that the use of WoundStat™ in GD contaminated wounds would not exacerbate GD toxicity. These data suggest that absorbent haemostatic products may offer some limited functionality as wound decontaminants.Peer reviewedFinal Accepted Versio
Engineering the future with America's high school students
The number of students enrolled in engineering is declining while the need for engineers is increasing. One contributing factor is that most high school students have little or no knowledge about what engineering is, or what engineers do. To teach young students about engineering, engineers need good tools. This paper presents a course of study developed and used by the authors in a junior college course for high school students. Students learned about engineering through independent student projects, in-class problem solving, and use of career information resources. Selected activities from the course can be adapted to teach students about engineering in other settings. Among the most successful techniques were the student research paper assignments, working out a solution to an engineering problem as a class exercise, and the use of technical materials to illustrate engineering concepts and demonstrate 'tools of the trade'
Recommended from our members
Chalcophile elements track the fate of sulfur at KÄ«lauea Volcano, Hawai'i
© 2020 Elsevier Ltd Chalcophile element concentrations in melt inclusions and matrix glasses may be used to investigate low pressure degassing processes, as well as sulfide saturation during crustal fractionation, and mantle melting. Erupted products from Kīlauea Volcano, Hawaiʻi, record three stages of sulfide saturation (in the mantle, crust, and within lava lakes), separated by episodes of sulfide resorption (i.e., sulfide undersaturation) during ascent through the thick Hawaiian lithosphere, and during syn-eruptive degassing. The presence of residual sulfides in the mantle source throughout the melting interval accounts for the high S concentrations of Kīlauean primary melts (1387–1600 ppm). Residual sulfides retain chalcophile elements during melting, decoupling the variability of these elements in high MgO melts from that of lithophile elements. Decompression associated with magma ascent through the thick Hawaiian lithosphere drives an increase in the sulfide concentration at sulfide saturation (SCSS2−), resulting in shallow storage reservoirs (∼1–5 km depth) being supplied with sulfide-undersaturated melts. A drop in temperature, coupled with major element changes during the fractionation of olivine, causes the SCSS2− to decrease. Combined with an increase in melt S contents during fractionation, this initiates a second stage of sulfide saturation at relatively high MgO contents (∼12 wt%). Syn-eruptive degassing of S drives the resorption of sulfides in contact with the carrier liquid. The covariance structure of Cu, MgO and Ni contents in melt inclusions and matrix glasses indicates that the dissolution of sulfides effectively liberates sulfide-hosted Cu and Ni back into the melt, rather than the vapour phase. The contrasting behaviour of Cu, Ni, Se and S during sulfide resorption indicates that the chalcophile element signature of the Kīlauean plume is largely controlled by silicate melt-vapour partitioning, rather than sulfide-vapour partitioning. The participation of dense sulfide liquids in shallow degassing processes may result from their direct attachment to buoyant vapour bubbles, or olivine crystals which were remobilized prior to eruption. Sulfide resorption obscures the textural and chemical record of sulfide saturation in matrix glasses, but not in melt inclusions, which are isolated from this late-stage release of chalcophile elements. The partitioning of S between the dissolving sulfide, melt and the vapour phase accounts for approximately 20% of the total S release into the atmosphere
Eye Movements and Behavioural Responses to Gaze-Contingent Expressive Faces in Typically Developing Infants and Infant Siblings
Shale Gas vs. Coal
Abstract: The aim of this paper is to examine the environmental impacts of shale gas, conventional gas and coal on air, water, and land in the United States. These factors decisively affect the quality of life (public health and safety) as well as local and global environmental protection. Comparing various lifecycle assessments, this paper will suggest that a shift from coal to shale gas would benefit public health, the safety of workers, local environmental protection, water consumption, and the land surface. Most likely, shale gas also comes with a smaller GHG footprint than coal. However, shale gas extraction can affect water safety. This paper also discusses related aspects that exemplify how shale gas can be more beneficial in the short and long term. First, there are technical solutions readily available to fix the most crucial problems of shale gas extraction, such as methane leakages and other geo-hazards. Second, shale gas is best equipped to smoothen the transition to an age of renewable energy. Finally, this paper will recommend tighter regulations
Accelerator system for the PRISM based muon to electron conversion experiment
The next generation of lepton flavor violation experiments need high
intensity and high quality muon beams. Production of such beams requires
sending a short, high intensity proton pulse to the pion production target,
capturing pions and collecting the resulting muons in the large acceptance
transport system. The substantial increase of beam quality can be obtained by
applying the RF phase rotation on the muon beam in the dedicated FFAG ring,
which was proposed for the PRISM project.This allows to reduce the momentum
spread of the beam and to purify from the unwanted components like pions or
secondary protons. A PRISM Task Force is addressing the accelerator and
detector issues that need to be solved in order to realize the PRISM
experiment. The parameters of the required proton beam, the principles of the
PRISM experiment and the baseline FFAG design are introduced. The spectrum of
alternative designs for the PRISM FFAG ring are shown. Progress on ring main
systems like injection and RF are presented. The current status of the study
and its future directions are discussed.Comment: Studies performed within the PRISM Task Force initiativ
Chalcophile element processing beneath a continental arc stratovolcano
The chalcophile elements are important both in terms of their economic value and as potential tracers of magmatic processes at convergent margins. However, because of analytical difficulties, comprehensive datasets of chalcophile element concentrations for volcanic rocks are rare. Here, we present analyses of a near complete suite of chalcophile elements (S, Cu, Ag, Se, As, Sb, Sn, W, Mo, Pb, Bi, Tl, Zn, Ga, Co) for volcanic rock samples collected from a typical continental arc stratovolcano in southern Chile (Antuco). Enrichment in Pb, Bi, W, Tl, Sb and As relative to Parental-MORB indicates that these elements have been mobilised from the subducting slab into the sub-arc mantle wedge, in contrast to Cu and Ag. Very low Se concentrations suggest that Se, like S, was lost during co-eruptive degassing of the Antuco magmas. Previous studies on oceanic arcs have demonstrated that as higher fO2 subduction-related magmas ascend through the overlying lithosphere, magnetite fractionation may trigger sulfide fractionation during crystallisation. If such a process is extensive and has a sharp onset, this would result in a plummet in the Cu, Se and Ag contents of the residual melt. At Antuco, although a decrease in the Fe2O3(T) and TiO2 concentrations at ∼55 wt.% SiO2 (∼3 wt.% MgO) indicates magnetite fractionation, this is not associated with a corresponding drop in Cu contents. Instead, we observe a general decrease in Cu and a decrease in Cu/Ag with increasing SiO2 and decreasing MgO. Furthermore, Cu/Ag in the most primitive Antuco rocks are lower than the global MORB array, indicating that the melts were sulfide saturated at an early stage in their crustal evolution. Through modelling fractional crystallisation, we show that only a minor volume (0.5–0.6 vol.%) of fractionating sulfide is needed to produce divergent trends in Cu and Ag, as observed in the Antuco samples. Our results show that sulfide fractionation occurred from an early stage during the crustal evolution of Antuco's magmas. We infer that this was promoted by stalling in the lower crust, which for oxidised magmas at depths >20 km is within the sulfide stability field. However, elevated DyN/YbN of the Antuco magmas compared to oceanic island arc magmas provides an additional, or alternate mechanism to inducing sulfide fractionation in the lower crust prior to ascent, through initial garnet fractionation. Fractional crystallisation within this depth range meant that later magnetite fractionation had only a minor impact on the partitioning behaviour of the chalcophile elements. In contrast, arc magmas transiting thinner crust may not experience sulfide saturation until a later stage in their evolution, induced by magnetite fractionation. Our results imply that convergent margin crustal thickness, and therefore the depth range of magmatic differentiation, determines the dominant control on initial magmatic sulfide saturation and therefore the primary distribution of chalcophile elements. This implies that secondary processes are required to explain the transport and concentration of sulfides and chalcophile elements at shallower crustal levels
Efficient inference and identifiability analysis for differential equation models with random parameters
Heterogeneity is a dominant factor in the behaviour of many biological
processes. Despite this, it is common for mathematical and statistical analyses
to ignore biological heterogeneity as a source of variability in experimental
data. Therefore, methods for exploring the identifiability of models that
explicitly incorporate heterogeneity through variability in model parameters
are relatively underdeveloped. We develop a new likelihood-based framework,
based on moment matching, for inference and identifiability analysis of
differential equation models that capture biological heterogeneity through
parameters that vary according to probability distributions. As our novel
method is based on an approximate likelihood function, it is highly flexible;
we demonstrate identifiability analysis using both a frequentist approach based
on profile likelihood, and a Bayesian approach based on Markov-chain Monte
Carlo. Through three case studies, we demonstrate our method by providing a
didactic guide to inference and identifiability analysis of hyperparameters
that relate to the statistical moments of model parameters from independent
observed data. Our approach has a computational cost comparable to analysis of
models that neglect heterogeneity, a significant improvement over many existing
alternatives. We demonstrate how analysis of random parameter models can aid
better understanding of the sources of heterogeneity from biological data.Comment: Minor changes to text. Additional results in supplementary material.
Additional statistics regarding results given in main and supplementary
materia
- …