159 research outputs found
Structure-property and composition-property relationships for poly(ethylene terephthalate) surfaces modified by helium plasma-based ion implantation
The surfaces of untreated and helium plasma-based ion implantation (He PBII) treated poly(ethylene terephthalate) (PET) samples were characterised by reflectance colorimetry, contact angle studies and measurements of surface electrical resistance. The results were related to the structural and compositional data obtained by the authors earlier on parallel samples by XPS and Raman spectroscopy. Inverse correlations between lightness and ID/IG ratio and between chroma and ID/IG ratio were obtained, suggesting that the PBII-treated PET samples darken and their colourfulness decreases with the increase of the portion of aromatic sp2 carbon rings in the chemical structure of the modified layer. Direct correlation between water contact angle and the ID/IG ratio and inverse correlations between surface energy and ID/IG ratio and between dispersive component of surface energy and ID/IG ratio were found, reflecting that surface wettability, surface energy and its dispersive component decrease with the formation of surface structure, characterised again by enhanced portion of aromatic sp2 carbon rings. The surface electrical resistance decreased with the increase of the surface C-content determined by XPS and also with the increase of the surface concentration of conjugated double bonds, reflected by the increase of the pi-pi* shake-up satellite of the C 1s peak
Characterization of the second- and third-order nonlinear optical susceptibilities of monolayer MoS using multiphoton microscopy
We report second- and third-harmonic generation in monolayer MoS
as a tool for imaging and accurately characterizing the material's nonlinear
optical properties under 1560 nm excitation. Using a surface nonlinear optics
treatment, we derive expressions relating experimental measurements to second-
and third-order nonlinear sheet susceptibility magnitudes, obtaining values of
m V and for the first time for
monolayer MoS, m V.
These sheet susceptibilities correspond to effective bulk nonlinear
susceptibility values of m V and
m V, accounting for the sheet
thickness. Experimental comparisons between MoS and graphene are
also performed, demonstrating 3.4 times stronger third-order sheet
nonlinearity in monolayer MoS, highlighting the material's
potential for nonlinear photonics in the telecommunications C band.Comment: Accepted by 2D Materials, 28th Oct 201
MLT gravity wave climatology in the South America equatorial region observed by airglow imager
International audienceAn all-sky CCD imager for OH, O2 and OI (557.7 nm) airglow emission measurements was operated at São João do Cariri (Cariri), Brazil (7° S, 36° W), from October 2000 to December 2004. A large amount of image data, more than 3000 h of observation and around 1000 wave events, makes it possible to classify the gravity wave characteristics, which are statistically significant. The observed waves show a typically short horizontal wavelength (5?45 km) and a short period (5?35 min), and horizontal phase speeds of 1 to 80 m/s. In most cases band-type waves (horizontal wavelength between 10 and 60 km) showed a clear preference for the horizontal propagation direction from the South American continent to the Atlantic Ocean. Ripples also have similar features but with different anisotropy. In this paper we focus our discussion on the wave characteristics of the bands and ripples and a comparison between them
Microstructure and magneto-dielectric properties of the chitosan/gelatin-YIG biocomposites
This work is devoted to the preparation of yttrium iron garnet (YIG) ferrimagnetic biocomposites based in biodegradable chitosan and gelatin. The aim was to produce composite films containing controlled amounts of YIG to obtain a new biological material with magneto-dielectric features. Structural characterization of the biocomposites was made by scanning electron microscopy, X-ray diffraction, infrared absorption spectroscopy and thermal analysis, while the dielectric and magnetic properties were obtained from dielectric spectroscopy and magnetic hysteresis loops, respectively. The versatility of the films obtained makes them possible candidates for use as biomaterials or electronic device
Fluorescence polarization and rheological studies of the poly(N-vinyl-2-pyrrolidone) hydrogels produced by UV radiation
Abstract Poly(N-vinyl-2-pyrrolidone) hydrogels produced by direct ultraviolet irradiation of PVP aqueous solution leads to crosslinking through pyrrolidinone moiety photolysis. Generally, hydrogel physical properties, like crosslinking density, pore size, swelling capacity, storage and loss moduli are obtained by swelling and rheological tests. However, relations between anisotropy obtained by fluorescence polarization studies and these properties have not been addressed for hydrogel systems. In this work we show that there is a correlation between the data obtained from anisotropy and rheological experiments, since both of them are related with crosslinking density of the hydrogels. These results reveal that fluorescence polarization spectroscopy is a promising tool for understanding the structure of hydrogels.
Characteristics of Mesospheric Gravity Waves Near the Magnetic Equator, Brazil, During the SpreadFEx Campaign
As part of the SpreadFEx campaign, coordinated optical and radio measurements were made from Brazil to investigate the occurrence and properties of equatorial Spread F, and to characterize the regional mesospheric gravity wave field. All-sky image measurements were made from two sites: Brasilia and Cariri located ~10° S of the magnetic equator and separated by ~1500 km. In particular, the observations from Brasilia provided key data in relatively close proximity to expected convective sources of the gravity waves. High-quality image measurements of the mesospheric OH emission and the thermospheric OI (630 nm) emission were made during two consecutive new moon periods (22 September to 9 November 2005) providing extensive data on the occurrence and properties of F-region depletions and regional measurements of the dominant gravity wave characteristics at each site
Surface characterization of photodegraded poly(ethylene terephthalate). The effect of ultraviolet absorbers
Abstract The surface characterization of photodegraded poly(ethylene terephthalate) was investigated. Films obtained by bi-axial extrusion were exposed in a laboratory weathering chamber for periods of up to , 1100 h of irradiation. Samples prepared with and without an ultraviolet (UV) absorber were tested by infrared, UV -visible and fluorescence spectroscopy. The results indicated that the unstabilized films are very susceptible to the degradation effects causing a large deterioration, especially in surface layers. The presence of an ultraviolet light absorber effectively reduced the formation of carboxyl end-groups at the surface as well as in the bulk of the films. In the case of samples with UV absorber the fluorescence data showed a barrier imposed by this additive in the formation of the monohydroxy-terephthalate. Scanning electron microcopy of fracture surfaces showed that film ductility is highly reduced after exposure.
- …